We will reply to your message within an hour.
Use these metal dowel pins as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts.
Oversized to fit worn and enlarged holes, these pins work well as repair and replacement parts.
To remove these pins, thread a screw or tool into the tapped hole, then pull them out.
The flat side of these pins relieves trapped air, making them easier to insert in and remove from blind holes. To remove, thread a screw or tool into the tapped hole, then pull the pin out.
A spiral groove cut into these pins relieves trapped air but stays in 360° contact with the hole for a secure fit that's easy to insert in and remove from blind holes. To remove, thread a screw or tool into the tapped hole, then pull the pin out.
For use with Browning shear hubs, these pins are designed to fail at specific loads to protect heavy duty machinery from torque overload.
These pins have a flat head to fit into a counterbored hole.
Push parts out of molds with these hardened pins. Also known as knockout and forged pins.
Use these pins with a die to punch 1/8" and larger holes. Pins can be modified to fit your application.
Interlocking teeth help these pins resist sliding when exposed to vibration. They have a slot that presses closed when the pins are inserted so they don't flex after installation.
For tough jobs, these spiral pins are 30% stronger than our standard coiled spring pins. They remain flexible after installation to absorb shock and vibration, and work well in holes that are out of round.
Choose a material, head type, end type, and size to create a custom pin.
Create a custom headed pin with your choice of material, dimensions, and end type.
Support and position workpieces and fixtures from the bottom or side. These buttons press into a drilled hole for permanent installation.
Mount through the counterbored hole with a socket head cap screw to support and position workpieces and fixtures from the bottom or side.
Support rounded or irregularly shaped workpieces from the bottom or side with minimal contact.
Use these components in coordinate measuring machine (CMM) applications to raise a workpiece and reliably position it on a fixture plate with ¼"-20 holes.
These brass tools reduce marring on metal surfaces because they're softer than steel punches.
Line up holes by driving these pins through existing rivet, pin, and bolt holes in multiple pieces of metal. Alternatively known as lineup taper punches.