System of Measurement System of Measurement |
|---|
|
Shaft Type Shaft Type |
|---|
 | Spiral |
Material Material |
|---|
|
Head Type Head Type |
|---|
 | Tapped |
Pin Type Pin Type |
|---|
 | Dowel |
End Shape End Shape |
|---|
 | Chamfered |
End Type End Type |
|---|
 | Plain |
Specifications Met Specifications Met |
|---|
Breaking Strength Breaking Strength |
|---|
|
|
Minimum Hardness Minimum Hardness |
|---|
|
Tolerance Rating Tolerance Rating |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Passivation Passivation |
|---|
|
Spiral-Vent Pull-Out Dowel Pins
A spiral groove cut into these pins relieves trapped air but stays in 360° contact with the hole for a secure fit that's easy to insert in and remove from blind holes. One end is tapped and the other is chamfered for easy insertion. To remove, thread a screw or tool into the tapped hole, then pull them out. Use them as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts. Pins are precision ground for accurate alignment. Breaking strength is measured as double shear, which is the force required to break a pin into three pieces.
Pins that meet ASME B18.8.2 specifications conform to ASME standards for material and dimensions.
Steel pins have good strength.
18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
4140 Alloy Steel Pins
| Lg. | Dia. Tolerance | Thread Size | Min. Hardness | Breaking Strength, lbs. | Specifications Met | Each | |
1/4" Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 3/4" | 0.0001" to 0.0003" | 8-32 | Rockwell C47 | 6,400 | ASME B18.8.2 | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | 8-32 | Rockwell C47 | 6,400 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 8-32 | Rockwell C47 | 6,400 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 8-32 | Rockwell C47 | 6,400 | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 8-32 | Rockwell C47 | 6,400 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 8-32 | Rockwell C47 | 6,400 | ASME B18.8.2 | 000000000 | 0000 |
5/16" Dia. | |||||||
| 3/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 10,000 | ASME B18.8.2 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 10,000 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 10,000 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 10,000 | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 10,000 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 10,000 | ASME B18.8.2 | 000000000 | 0000 |
3/8" Dia. | |||||||
| 1" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
| 1 3/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
| 3" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 00000 |
1/2" Dia. | |||||||
| 1" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 1 3/4" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/4" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 00000 |
| 3 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 00000 |
5/8" Dia. | |||||||
| 1 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 39,000 | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 39,000 | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/4" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 39,000 | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 39,000 | ASME B18.8.2 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 39,000 | ASME B18.8.2 | 000000000 | 00000 |
3/4" Dia. | |||||||
| 2" | 0.0001" to 0.0003" | 5/16"-18 | Rockwell C47 | 57,000 | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | 5/16"-18 | Rockwell C47 | 57,000 | ASME B18.8.2 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | 5/16"-18 | Rockwell C47 | 57,000 | ASME B18.8.2 | 000000000 | 00000 |
| 4" | 0.0001" to 0.0003" | 5/16"-18 | Rockwell C47 | 57,000 | ASME B18.8.2 | 000000000 | 00000 |
1" Dia. | |||||||
| 2" | 0.0001" to 0.0003" | 3/8"-16 | Rockwell C47 | 102,000 | ASME B18.8.2 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | 3/8"-16 | Rockwell C47 | 102,000 | ASME B18.8.2 | 000000000 | 00000 |
| 4" | 0.0001" to 0.0003" | 3/8"-16 | Rockwell C47 | 102,000 | ASME B18.8.2 | 000000000 | 00000 |
18-8 Stainless Steel Pins
| Lg. | Dia. Tolerance | Thread Size | Min. Hardness | Breaking Strength | Specifications Met | Each | |
1/4" Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 3/4" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
5/16" Dia. | |||||||
| 3/4" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
3/8" Dia. | |||||||
| 1" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 1 1/4" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 1 3/4" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/4" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
1/2" Dia. | |||||||
| 1" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 1 1/4" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 1 3/4" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/4" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 3 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
5/8" Dia. | |||||||
| 1 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/4" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
3/4" Dia. | |||||||
| 2" | 0.0001" to 0.0003" | 5/16"-18 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | 5/16"-18 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | 5/16"-18 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 4" | 0.0001" to 0.0003" | 5/16"-18 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
1" Dia. | |||||||
| 2" | 0.0001" to 0.0003" | 3/8"-16 | Not Rated | Not Rated | __ | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | 3/8"-16 | Not Rated | Not Rated | __ | 000000000 | 00000 |
| 4" | 0.0001" to 0.0003" | 3/8"-16 | Not Rated | Not Rated | __ | 000000000 | 00000 |
Optional Insertion and Removal Tools
Use with internally threaded dowel pins. A complete tool requires a puller handle and a tip that fits your pin. You’ll also need a socket head cap screw that can thread into the pin. To use, thread a tip into the puller handle and fit the other end of the tip over the screw. Slide the weight along the handle to push or pull.