These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights.

These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.

Gooseneck arms can be repositioned faster and more easily than articulating arms.

Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable.

No need for wiring—these lights plug into a standard wall outlet. Also known as shop lights.

Also known as pendant lights, these fixtures hang from a cord.

Don’t waste energy lighting unoccupied spaces—these lights turn on when they detect movement.

Update standard outlet boxes in closets, hallways, and storage rooms to use LED light.

Also known as troffers, these lights fit most standard drop-ceiling grids.

Light up spaces that have no electrical connection or are difficult to wire, such as sheds and closets.

Brighten high-traffic areas with our most rugged ceiling lights. Rated IK10, the highest impact resistance rating, they’re protected by a 16-gauge cold-rolled steel frame and polycarbonate lens.

Maximize the light that reaches your shelving. Often used in storage rooms and warehouse rack rows, these lights have reflectors that direct all light downwards from ceilings up to 24 ft. high.

Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.

Customize these lights to label doors or areas of a building.

Create ambient and accent lighting with these sleek, modern lights that shine above, below, and around themselves.

Built for hot, hazardous areas such as steel mills and refineries, these lights work in temperatures up to 212° F. Rated NEC Classes I and II, they’re safe to use where there are ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust.

Safely light up chemical processing plants, mining operations, and other large areas where combustible gases and dust are present. These lights have an explosion-proof housing that contains sparks and flames, so they won’t react to nearby hazards.

Illuminate chemical plants, refineries, and other facilities where flammable and combustible gases may be present in the event of a leak or ventilation failure. These lights are rated for use in NEC Class 1, Division 2 hazardous locations.

The enclosure on these jelly jar lights contains explosions, sparks, and flashes. These lights are safe to use in NEC Class I, II, and III, Division 1 hazardous locations.

A sealed lens keeps moisture out to protect these lights against washdowns.

Upgrade your traditional fluorescent washdown lights—these LEDs last longer and eliminate the need to replace bulbs.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs.

Brighten your ISO Class 3 clean room with long rows of lights—you can wire these lights together at the ends. They have an airtight seal that keeps contaminants from entering your space.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

Illuminate machines or monitor processes in areas where flammable or combustible gases may be present, such as during leaks or ventilation failures. These lights are rated for use in NEC Class 1, Division 2 hazardous locations.

Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status.

Update conventional fluorescent tubular lights with newer LED technology. These lights match the diameter of most older lights and fit existing brackets without the need to drill new mounting holes.

These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.

Illuminate outdoor areas and objects such as parking lots, flag poles, and billboards.

Hardwire these lights to a power source.

Also known as wall packs, these lights mount to exterior walls and ceilings.

These lights are UL listed for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

A motion sensor turns on these lights when an enclosure door is opened. Mount them inside cabinets, closets, and other enclosed spaces.

Illuminate your electronics cabinets and racks with long-lasting LED lights.

Mount add-on heads in remote areas to extend emergency lighting.

These lights are UL rated for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

These lights are sealed to protect against humidity, moisture, and dripping and splashing liquids.