Miniature Pass-Through Drawer Slides
The size of a finger, these tiny slides open in both directions. All have ball bearings for smooth operation.
For technical drawings and 3-D models, click on a part number.
Mounting | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Closed Lg. | Travel Lg. | Wd. | Ht. | Capacity per Pair (Mounting Location) | Roller Type | Fasteners Included | Screw Size  | Pair | |
Anodized Aluminum | |||||||||
| 2 3/4" | 1 1/4" | 3/16" | 5/8" | 6 1/2 lbs. (Side), 2 lbs. (Base) | Ball Bearing | No | M2.6 | 0000000 | 000000 |
| 3 15/16" | 1 9/16" | 3/16" | 5/8" | 11 lbs. (Side), 4 lbs. (Base) | Ball Bearing | No | M2.6 | 0000000 | 00000 |
| 5 7/8" | 3 1/8" | 3/16" | 5/8" | 15 lbs. (Side), 6 1/2 lbs. (Base) | Ball Bearing | No | M2.6 | 0000000 | 00000 |
Soft-Closing Heavy Duty Base- and Under-Mount Drawer Slides
To prevent drawers from slamming shut and support them even if they’re tall and full of heavy equipment, these steel slides have soft-closing bumpers and mount to the top and bottom of drawers. They’re commonly used in washdown areas such as kitchens because they have a powder coating to prevent rust and their ball bearings are encased to keep liquid out. Since they’re encased, the ball bearings spread weight more evenly than standard ball bearings, which makes them quieter and support more weight. To make sure the bearings don’t wobble or fall off track because of heavy loads, these slides have rail guides. Slides maintain a consistent amount of support as you fully extend them, so reaching deep inside drawers isn’t an issue. All are LGA tested according to DIN 4554 for safety, performance, and quality.
Bottom Slide | Top Slide | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Closed Length | Travel Length | Mounting Location | Width | Height | Mounting Location | Width | Height | Capacity per Pair, lbs. | Roller Type | Fasteners Included | Screw Size | Color | Pair | |
Powder-Coated Steel | ||||||||||||||
| 22 5/8" | 22" | Base | 4 5/16" | 3 1/8" | Under Mount | 1 9/16" | 2 5/16" | 275 | Ball Bearing | No | 1/4", No. 10, No. 6 | White | 00000000 | 0000000 |
Base-Mount Drawer Slides
When you don't have enough clearance for side-mount or under-the-counter slides, mount these to the base of your drawer. The slides fully extend for convenient access to the back of drawers. All have ball bearing rollers for smooth, quiet operation.
For technical drawings and 3-D models, click on a part number.
Mounting | ||||||||
|---|---|---|---|---|---|---|---|---|
| Closed Lg. | Travel Lg. | Wd. | Ht. | Capacity per Pair, lbs. | Fasteners Included | Screw Size | Pair | |
Steel | ||||||||
| 14" | 14" | 3" | 3/4" | 180 | No | 1/4" | 0000000 | 0000000 |
| 16" | 16" | 3" | 3/4" | 180 | No | 1/4" | 0000000 | 000000 |
| 18" | 18" | 3" | 3/4" | 180 | No | 1/4" | 0000000 | 000000 |
| 20" | 20" | 3" | 3/4" | 180 | No | 1/4" | 0000000 | 000000 |
| 22" | 22" | 3" | 3/4" | 180 | No | 1/4" | 0000000 | 000000 |
| 24" | 24" | 3" | 3/4" | 180 | No | 1/4" | 0000000 | 000000 |
| 26" | 26" | 3" | 3/4" | 180 | No | 1/4" | 0000000 | 000000 |
| 28" | 28" | 3" | 3/4" | 180 | No | 1/4" | 0000000 | 000000 |
| 30" | 30" | 3" | 3/4" | 180 | No | 1/4" | 0000000 | 000000 |
| 32" | 32" | 3" | 3/4" | 180 | No | 1/4" | 0000000 | 000000 |
| 36" | 36" | 3" | 3/4" | 180 | No | 1/4" | 0000000 | 000000 |
| 40" | 40" | 3" | 3/4" | 180 | No | 1/4" | 0000000 | 000000 |
| 48" | 48" | 3" | 3/4" | 180 | No | 1/4" | 0000000 | 000000 |
| 60" | 60" | 3" | 3/4" | 180 | No | 1/4" | 0000000 | 000000 |
304 Stainless Steel | ||||||||
| 11 13/16" | 13 3/16" | 2 15/16" | 1 1/16" | 100 | No | M4, No. 7 | 00000000 | 000000 |
| 15 3/4" | 17 1/8" | 2 15/16" | 1 1/16" | 85 | No | M4, No. 7 | 00000000 | 000000 |
| 19 11/16" | 21 1/16" | 2 15/16" | 1 1/16" | 90 | No | M4, No. 7 | 00000000 | 000000 |
| 23 5/8" | 25 1/16" | 2 15/16" | 1 1/16" | 85 | No | M4, No. 7 | 00000000 | 000000 |
| 31 1/2" | 32 7/8" | 2 15/16" | 1 1/16" | 70 | No | M4, No. 7 | 00000000 | 000000 |
| 39 3/8" | 40 3/4" | 2 15/16" | 1 1/16" | 55 | No | M4, No. 7 | 00000000 | 000000 |
Soft-Open Base-Mount Drawer Slides
These slides gradually slow the drawer's motion to prevent it from slamming open. When you don't have enough clearance for side-mount or under-the-counter slides, mount these to the base of your drawers. The slides only extend 3/4 of the closed length to reduce the chance that a heavy load will tip your cabinet. They also have a pull-out release, so a brake will stop the slide components from coming apart when the drawer is extended. If you need to remove the drawer, pull forcefully to separate the slide parts. All have ball bearing rollers for smooth, quiet operation. Made of stainless steel, they resist corrosion and are commonly used in environments that may get wet or require regular cleaning.
For technical drawings and 3-D models, click on a part number.
Mounting | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Closed Lg. | Travel Lg. | Wd. | Ht. | Capacity per Pair, lbs. | Roller Type | Fasteners Included | Screw Size | Pair | |
304 Stainless Steel | |||||||||
With Pull-Out Drawer Release | |||||||||
| 12 3/4" | 8 1/2" | 1 3/8" | 3/8" | 35 | Ball Bearing | No | No. 8 | 0000000 | 000000 |
| 14 3/4" | 10 1/2" | 1 3/8" | 3/8" | 30 | Ball Bearing | No | No. 8 | 0000000 | 00000 |
| 16 3/4" | 12" | 1 3/8" | 3/8" | 30 | Ball Bearing | No | No. 8 | 0000000 | 00000 |
| 18 3/4" | 12 1/2" | 1 3/8" | 3/8" | 30 | Ball Bearing | No | No. 8 | 0000000 | 00000 |
| 20 3/4" | 14 1/2" | 1 3/8" | 3/8" | 25 | Ball Bearing | No | No. 8 | 0000000 | 000000 |
| 22 3/4" | 16 1/2" | 1 3/8" | 3/8" | 25 | Ball Bearing | No | No. 8 | 0000000 | 000000 |
| 24 3/4" | 17 1/2" | 1 3/8" | 3/8" | 20 | Ball Bearing | No | No. 8 | 0000000 | 000000 |
Heavy Duty Base- and Under-Mount Drawer Slides
Mounting to the tops and bottoms of drawers, these steel slides support drawers even if they’re tall and hold heavy equipment. They’re often used in kitchens and other washdown areas because they’re powder-coated to resist rusting and their ball bearings are encased to keep out liquid. The encased ball bearings also distribute weight more evenly than standard ball bearings, which means they’re quieter and support more weight. To keep the bearings from wobbling or falling off track due to heavy loads, these slides have rail guides. Slides maintain a constant amount of support as you fully extend them, so accessing deep inside drawers isn’t a problem. All are LGA tested according to DIN 4554 for safety, performance, and quality.
Add slow-closing attachments to keep drawers from slamming.
For technical drawings and 3-D models, click on a part number.
Slides | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bottom Slide | Top Slide | Mounting | Optional Slow-Closing Attachments | |||||||||||||
| Closed Length | Travel Length | Mounting Location | Width | Height | Mounting Location | Width | Height | Capacity per Pair, lbs. | Roller Type | Fasteners Included | Screw Size | Color | Pair | Pair | ||
| 17 3/4" | 17 1/16" | Base | 5 1/16" | 3 9/16" | Under Mount | 1 9/16" | 2 5/16" | 440 | Ball Bearing | No | 1/4", No. 6 | White | 0000000 | 0000000 | 0000000 | 000000 |
| 19 11/16" | 19 1/16" | Base | 5 1/16" | 3 9/16" | Under Mount | 1 9/16" | 2 5/16" | 440 | Ball Bearing | No | 1/4", No. 6 | White | 0000000 | 000000 | 0000000 | 00000 |
| 21 5/8" | 21" | Base | 5 1/16" | 3 9/16" | Under Mount | 1 9/16" | 2 5/16" | 440 | Ball Bearing | No | 1/4", No. 6 | White | 0000000 | 000000 | 0000000 | 00000 |
| 23 5/8" | 23" | Base | 5 1/16" | 3 9/16" | Under Mount | 1 9/16" | 2 5/16" | 440 | Ball Bearing | No | 1/4", No. 6 | White | 0000000 | 000000 | 0000000 | 00000 |
Hold-Closed Base-Mount Drawer Slides
A stop holds the drawer closed; pull firmly on the drawer to open. When you don't have enough clearance for side-mount or under-the-counter slides, mount these to the base of your drawers. The slides fully extend for convenient access to the back of drawers. All have ball bearing rollers for smooth, quiet operation.
For technical drawings and 3-D models, click on a part number.
Mounting | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Closed Lg. | Travel Lg. | Wd. | Ht. | Capacity per Pair, lbs. | Roller Type | Fasteners Included | Screw Size | Pair | |
Steel | |||||||||
| 14" | 14 13/16" | 2 1/4" | 1 9/16" | 145 | Ball Bearing | Yes | No. 8 | 00000000 | 0000000 |
| 16" | 16 13/16" | 2 1/4" | 1 9/16" | 140 | Ball Bearing | Yes | No. 8 | 00000000 | 000000 |
| 18" | 18 13/16" | 2 1/4" | 1 9/16" | 130 | Ball Bearing | Yes | No. 8 | 00000000 | 000000 |
| 20" | 20 13/16" | 2 1/4" | 1 9/16" | 120 | Ball Bearing | Yes | No. 8 | 00000000 | 000000 |
| 22" | 22 13/16" | 2 1/4" | 1 9/16" | 110 | Ball Bearing | Yes | No. 8 | 00000000 | 000000 |
| 24" | 24 13/16" | 2 1/4" | 1 9/16" | 100 | Ball Bearing | Yes | No. 8 | 00000000 | 000000 |
| 26" | 26 13/16" | 2 1/4" | 1 9/16" | 85 | Ball Bearing | Yes | No. 8 | 00000000 | 000000 |
| 28" | 28 13/16" | 2 1/4" | 1 9/16" | 85 | Ball Bearing | Yes | No. 8 | 00000000 | 000000 |