The bits in this set have rubber blended into the abrasive, which cushions during grinding to produce a smooth to extra-smooth surface texture.

Bits thread onto mounted shanks so you can quickly switch head shapes without removing the shank. The abrasive grains are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.

Set contains an assortment of tools for grinding, sanding, and cutting on small surface areas.

Similar to diamond, boron nitride is harder than aluminum oxide and lasts longer. Bits are also known as jig grinding pins and mandrels.

Set contains a selection of our most popular hex-shank grinding bits. Use them in any drill chuck that accepts a 1/4" hex shank.

The small 3/32" diameter shank and small head makes these bits good for precise and intricate jobs.

Almost as hard as diamond, these tungsten carbide bits cut through nonmetals without generating heat.

Complete a wide range of cutting, grinding, and sanding tasks by pairing these accessories with your rotary tool.

Shape, debur, and sand edges and internal surfaces.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

A coating prevents dust and debris from building up on the abrasive surface. These sleeves shape, deburr, and sand edges and internal surfaces.

Assortments include a variety of sanding drums and sleeves to shape, deburr, and sand edges and internal surfaces.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Choose a bit with the same angle as your countersink to debur the inside of the hole.

As the outer layer wears away, new abrasive is exposed.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Various sizes and grits of flap sanding wheels are included in these assortments. Secure the shank into the collet or chuck of your tool.

The flaps are slit into narrow strips to provide more flexibility than other flap wheels.

The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

A coating prevents dust and debris from building up on the abrasive surface.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

Assortments include a selection of flap wheels to polish, clean, and deburr deep inside tubes and cylinders.

These bobs have a long-lasting diamond abrasive.

Polish small areas and hard-to-reach spots. Use in a drill or grinder for bits and burs.

The edge of the wheel is tapered for polishing joints, grooves, and crevices.

Specially shaped to buff the insides of metal pipes, cylinders, stampings, and tapered objects.

Use these rigid wheels to remove gouges and scratches from metal workpieces.

Made of loose layers of cotton.

Attach cutoff wheels to a Dremel grinder.

The arbor’s shank attaches to hand-held drills and die grinders. Threads on the body hold the sanding roll in place.

Use flap wheels with a threaded stud in tools that accept a shank.

No tools required—twist the drum head by hand to tighten the sanding sleeve to the drum.

The shank on these spindles installs directly into grinder collets and drill chucks.

Mount to the straight shaft on your grinder or buffer.

Drill holes up to 1 1/2" in diameter.

These hollow bits cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

A built-in stop ensures repeatable drilling depths for installing drop-in anchors.

The segmented edge on these blades is coated with diamond grit for cutting plastic.

A tungsten carbide grit edge cuts through abrasive materials such as composites and fiberglass.

Use these wheels for cutting soft metal, plastic, stone, and wood.

Made of diamond abrasive, these wheels cut ceramics, tile, and other abrasive materials.

Removable bands around the bristles keep them from flaring and breaking. Adjust the bands to change bristle length.

Removable bands around the bristles keep them from flaring and breaking. Adjust the bands to change bristle length.

The abrasive lasts longer than that of standard brushes.

Use for tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. The small brush face can access hard-to-reach spots.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Use on delicate surfaces.

These brushes conform to corners, curves, and irregular surfaces to remove light-to-medium rust and stains and small burs.

Use for tasks such as removing weld slag, heavy surface contamination, and large burs.

Use on delicate surfaces.

Use on contours and angles or for reaching into cracks and corners.

A special fastener on the back of these brushes allows you to easily swap one brush for another.