We will reply to your message within an hour.
Line up holes by driving these pins through existing rivet, pin, and bolt holes in multiple pieces of metal. Alternatively known as lineup taper punches.
When one side wears out, use the other one. Also known as barrel drift pins.
These brass tools reduce marring on metal surfaces because they're softer than steel punches.
Often called bull pins, these pins are designed to resist mushrooming caused by repeated pounding.
Turn the pin and the tapered shaft forces the two holes into alignment.
Made from aluminum-bronze that is Factory Mutual approved, these nonmagnetic, corrosion-resistant tools inhibit sparking. They satisfy OSHA requirements for nonsparking tools.
When one side wears out, use the other one.
Use alignment pins to align structural components such as I-beams and angle iron for bolting, riveting, and welding.
The tapered shaft of these pins eliminates the need for hammering and prying when aligning flange bolt holes.
Separate Morse taper shank cutting tools from machinery spindles and Morse taper adapters. These tools are also known as drill drifts and drift keys.
Precisely align drilled holes in two parts.
Line up two pipe flanges and determine pipe angle with the included nut-and bolt pins, level, and protractor.
Ensure horizontal alignment of pipe flanges with a level rod that runs between two alignment pins.
Each step on these aligner pins matches common bolt holes on pipe flanges, so they're more precise than conical aligner pins and don’t require nuts. Press the pair of pins into mated flanges to make sure the flanges are aligned.
Insert a pair of these nut-and bolt pins into adjacent flange holes and tighten to align flanges before connecting two pipes.