McMaster-Carr logo
    Filter by
    System of Measurement
    For Hole Type
    Thread Type
    Industrial Info Compare
    Chamfer Type
    Number of Flutes
    Component
    Number of Pieces
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    89 Products

    Tap and Drill Bit Sets

    Image of Product. Front orientation. Tap and Drill Bit Sets. Tap and Drill Bit Sets, Plastic Case.

    Plastic Case

    Image of Product. Front orientation. Tap and Drill Bit Sets. Tap and Drill Bit Sets, Metal Case.

    Metal Case

    Image of Product. Front orientation. Tap and Drill Bit Sets. Tap and Drill Bit Sets, Plastic Pouch.

    Plastic Pouch

    Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
    Uncoated Carbon Steel Tap—Uncoated carbon steel taps are for thread repair and occasional tapping.
    Uncoated High-Speed Steel Tap—Uncoated high-speed steel taps have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel taps. Use them for small-scale jobs.
    Uncoated Cobalt Steel Tap—Uncoated cobalt steel taps have higher strength and wear resistance than carbon steel and high-speed steel taps.
    Black-Oxide High-Speed Steel Tap—Black-oxide high-speed steel taps have a longer tool life than carbon steel. They cut with less friction than uncoated taps.
    Titanium Nitride (TiN)-Coated High-Speed Steel Tap—Titanium nitride (TiN)-coated high-speed steel taps have a longer tool life than carbon steel. They resist heat and wear better than uncoated taps, letting them last up to twice as long.
    Taper Chamfer—Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
    Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    Bottoming Chamfer—Bottoming-chamfer taps cut into the workpiece with just 1-2 chamfered threads. This short chamfer lets them thread holes closer to the bottom than other taps, but they require more torque to start threads.
    Black-Oxide High-Speed Steel Drill Bit—Black-oxide high-speed steel drill bits have a longer tool life than carbon steel. They cut with less friction than uncoated drill bits.
    Gold-Oxide High-Speed Steel Drill Bit—Gold-oxide high-speed steel drill bits have a longer tool life than carbon steel.
    Titanium Nitride (TiN)-Coated High-Speed Steel Drill Bit—Titanium nitride (TiN)-coated high-speed steel drill bits have a longer tool life than carbon steel. They last longer and can drill at higher speeds than uncoated and oxide-coated drill bits.
    Uncoated Cobalt Steel Drill Bit—Uncoated cobalt steel drill bits have higher strength and wear resistance than carbon steel and high-speed steel drill bits.
    Uncoated High-Speed Steel Drill Bit—Uncoated high-speed steel drill bits have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel drill bits. Use them for small-scale jobs.
    No. of
    Pieces
    Chamfer Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Includes
    Each
    Uncoated Carbon Steel Tap
    13Plug1 each of sizes:
    4-40
    6-32
    8-32
    10-24
    10-32
    1/4"-20    		2"
    2 1/8"
    2 9/32"
    2 9/16"
    2 39/64"    		UNC, UNF
    		3, 4H343 ga.
    35 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.    		Black-Oxide High-Speed SteelPlastic CaseTap Wrench0000000000000
    29Taper, Plug, Bottoming3 each of sizes:
    M3 × 0.50 mm
    M4 × 0.70 mm
    M5 × 0.80 mm
    M6 × 1.00 mm
    M8 × 1.25 mm
    M10 × 1.50 mm
    M12 × 1.75 mm    		1 39/64"
    1 27/32"
    2 1/64"
    2 3/32"
    2 13/64"
    2 3/4"
    2 61/64"    		Metric
    		3, 4H6
    2.5 mm
    3.3 mm
    4.2 mm
    5.0 mm
    6.8 mm
    8.5 mm
    10.2 mm    		Black-Oxide High-Speed SteelMetal CaseTap Wrench0000000000000
     
    Uncoated High-Speed Steel Tap
    10Plug1 each of sizes:
    1/4"-20
     5/16"-18
    3/8"-16
    7/16"-14
    1/2"-13    		2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC
    		4Not Rated27/64"
    5/16"
    7 ga.
    F
    U    		Black-Oxide High-Speed SteelPlastic Pouch—0000000000000
    16Plug1 each of sizes:
    M3 × 0.50 mm
    M3.5 × 0.60 mm
    M4 × 0.70 mm
    M5 × 0.80 mm
    M6 × 1.00 mm
    M8 × 1.25 mm
    M10 × 1.50 mm
    M12 × 1.75 mm    		1 15/16"
    2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 3/4"
    2 15/16"
    3 3/8"    		Metric
    		3, 4D3, D4, D5, D62.5 mm
    2.9 mm
    3.3 mm
    4.2 mm
    5.0 mm
    6.75 mm
    8.5 mm
    10.25 mm    		Black-Oxide High-Speed SteelPlastic Pouch—0000000000000
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Uncoated High-Speed SteelMetal Case—0000000000000
    18Plug1 each of sizes:
    6-40
    8-36
    10-24
    10-32
    1/4-28
    5/16-24
    3/8-24
    7/16-20
    1/2-20    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H2, H329/64"
    25/64"
    33 ga.
    29 ga.
    25 ga.
    21 ga.
    3 ga.
    I
    Q    		Uncoated High-Speed SteelMetal Case—0000000000000
    18Plug1 each of sizes:
    M2.5 × 0.45 mm
    M3 × 0.50 mm
    M3.5 × 0.60 mm
    M4 × 0.70 mm
    M5 × 0.80 mm
    M6 × 1.00 mm
    M8 × 1.25 mm
    M10 × 1.50 mm
    M12 × 1.75 mm    		1 3/4"
    1 15/16"
    2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 3/8"    		Metric
    		3, 4D3, D4, D5, D62.05 mm
    2.5 mm
    2.9 mm
    3.3 mm
    4.2 mm
    5.0 mm
    6.7 mm
    8.5 mm
    10.2 mm    		Uncoated High-Speed SteelMetal Case—00000000000000
    29Taper, Plug, Bottoming3 each of sizes:
    M3 × 0.50 mm
    M4 × 0.70 mm
    M5 × 0.80 mm
    M6 × 1.00 mm
    M8 × 1.25 mm
    M10 × 1.50 mm
    M12 × 1.75 mm    		1 39/64"
    1 27/32"
    2 1/64"
    2 3/32"
    2 13/64"
    2 3/4"
    2 61/64"    		Metric
    		3, 4H6
    2.5 mm
    3.3 mm
    4.2 mm
    5.0 mm
    6.8 mm
    8.5 mm
    10.2 mm    		Black-Oxide High-Speed SteelMetal CaseTap Wrench0000000000000
     
    Uncoated Cobalt Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		2, 3H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Uncoated Cobalt SteelMetal Case—0000000000000
     
    Black-Oxide High-Speed Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Black-Oxide High-Speed Steel, Gold-Oxide High-Speed SteelMetal Case—00000000000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Titanium Nitride (TiN)-Coated High-Speed SteelMetal Case—00000000000000
     

    Chip-Clearing Tap and Drill Bit Sets for Through Holes

    Image of Product. Front orientation. Tap and Drill Bit Sets. Chip-Clearing Tap and Drill Bit Sets for Through Holes.
    Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes. Because they don't need to be reversed to prevent buildup, they produce threads more efficiently than standard taps and are suitable for production work. Taps have a square shank for compatibility with tap wrenches and tap holders for drill presses and milling machines. With a plug chamfer, they have 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping. All taps and drill bits are made of high-speed steel for use on most metal and plastic.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Each
    Uncoated High-Speed Steel Tap
    18Plug6-32
    8-32
    10-24
    10-32
    1/4"-20
    5/16"-18
    3/8"-16
    7/16"-14
    1/2"-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		2, 3H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Black-Oxide High-Speed SteelMetal Case000000000000000
     
    Gold-Oxide High-Speed Steel Tap
    18Plug6-40
    8-36
    10-24
    10-32
    1/4"-28
    5/16"-24
    3/8"-24
    7/16"-20
    1/2"-20    		2 1/16"
    2 7/32"
    2 15/32"
    2 5/8"
    2 7/8"
    3 1/8"
    3 5/32"
    3 3/8"    		UNF
    		2, 3H2, H329/64"
    25/64"
    33 ga.
    29 ga.
    25 ga.
    21 ga.
    3 ga.
    I
    Q    		Gold-Oxide High-Speed SteelMetal Case00000000000000
    18PlugM2.5 × 0.45 mm
    M3 × 0.5 mm
    M3.5 × 0.6 mm
    M4 × 0.7 mm
    M5 × 0.8 mm
    M6 × 1.00 mm
    M8 × 1.25 mm
    M10 × 1.5 mm
    M12 × 1.75 mm    		1 13/16"
    1 15/16"
    2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 3/8"    		Metric
    		2, 3D3, D4, D5, D62.05 mm
    2.5 mm
    2.9 mm
    3.3 mm
    4.2 mm
    5 mm
    6.7 mm
    8.5 mm
    10.2 mm    		Gold-Oxide High-Speed SteelMetal Case00000000000000
     

    Hex-Shank Tap and Drill Bit Sets

    Image of Product. Front orientation. Tap and Drill Bit Sets. Hex-Shank Tap and Drill Bit Sets.
    Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
    Uncoated High-Speed Steel Tap—Uncoated high-speed steel taps have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel taps. Use them for small-scale jobs.
    Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    Black-Oxide High-Speed Steel Drill Bit—Black-oxide high-speed steel drill bits have a longer tool life than carbon steel. They cut with less friction than uncoated drill bits.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Each
    Uncoated High-Speed Steel Tap
    36Plug1 each of sizes:
    6-32
    6-40
    8-32
    8-36
    10-24
    10-32
    12-24
    12-28
    1/4"-20
    1/4"-28
    5/16"-18
    5/16"-24
    3/8"-24
    3/8"-16
    7/16"-14
    7/16"-20
    1/2"-13
    1/2"-20    		2"
    2 1/8"
    2 5/32"
    2 11/64"
    2 3/8"
    2 1/2"
    2 15/16"
    3 5/32"
    3 7/32"    		UNC, UNF
    		3, 4H2, H31 each of sizes:
    25/64"
    27/64"
    29/64"
    5/16"
    36 ga.
    33 ga.
    25 ga.
    21 ga.
    16 ga.
    15 ga.
    7 ga.
    3 ga.
    F
    I
    Q
    U
    2 each of sizes:
    29 ga.    		Black-Oxide High-Speed SteelMetal Case00000000000000
     

    Tap and Drill Bit Cases

    For Drill Bits
    Image of Product. Front orientation. Tap and Drill Bit Stands. Tap and Drill Bit Cases, For Drill Bits, Steel.
    Image of Product. Front orientation. Tap and Drill Bit Stands. Tap and Drill Bit Cases, For Drill Bits, Plastic.

    Steel

    Plastic

    Store and organize drill bits so they stay in good working condition and don't go missing. These cases have individually marked holes for each size in your set.
    Steel—Steel cases have stands that fold in and out. Stand them up when you need them, then fold them back into the slim case for storage inside a workbench drawer.
    Plastic—Plastic cases have screw-on lids to block out moisture. Compared to steel cases, they're lighter, and they resist rust and dents. Clip them onto your belt to take with you on the job.
    For
    Drill Bit
    Overall
    Material
    No.
    of
    Size
    Dia.
    Lg.
    Wd.
    Ht.
    Features
    Each
    For Inch Drill Bits
     
    For Jobbers' Length
    Steel131/16" to 1/4" (Increments of 1/64")—5 3/8"4"3/8"—000000000000
    Steel151/16" to 1/2" (increments of 1/32")—7"4"1 1/4"—000000000000
    Steel161/64" to 1/4" (increments of 1/64")—5 3/8"4"3/8"—000000000000
    Steel211/16" to 3/8" (Increments of 1/64")—6"4"1 1/8"—000000000000
    Steel291/16" to 1/2" (Increments of 1/64")—7"4"1 3/4"—000000000000
    Plastic291/16" to 1/2" (Increments of 1/64")3"——6 5/8"Belt Clip000000000000
     
    For Maintenance Length
    Plastic291/16" to 1/2" (Increments of 1/64")3 3/4"——6 1/2"Belt Clip000000000000
     
    For Short Length
    Steel291/16" to 1/2" (Increments of 1/64")—7"4"1 3/4"—000000000000
     
    For Extended Length—8" Maximum Drill Bit Length
    Steel291/16" to 1/2" (Increments of 1/64")—8 3/4"4"1 3/4"—000000000000
     
    For Reduced-Shank Length—1/2" Drill Bit Shank Size
    Steel89/16" to 1" (increments of 1/16")—8 1/2"6 1/4"2"—000000000000
     
    For Wire Gauge Drill Bits
     
    For Jobbers' Length
    Steel2080 Ga. to 61 Ga.—2"1 1/2"1/4"—00000000000
    Steel6060 Ga. to 1 Ga.—4 1/2"3 1/4"1"—000000000000
     
    For Short Length
    Steel6060 Ga. to 1 Ga.—4 1/2"3 1/4"1"—000000000000
     
    For Letter Size Drill Bits
     
    For Jobbers' Length
    Steel26A to Z—7"4"1 3/4"—000000000000
     
    For Short Length
    Steel26A to Z—7"4"1 3/4"—000000000000
     
    For Metric Drill Bits
     
    For Jobbers' Length
    Steel131.0 mm to 7.0 mm (Increments of 0.5 mm)—5 1/2"4"1/2"—00000000000
    Steel191.0 mm to 10.0 mm (Increments of 0.5 mm)—6"4"1 1/8"—000000000000
    Steel251.0 mm to 13.0 mm (Increments of 0.5 mm)—7"4"1 3/4"—000000000000
    Steel416.0 mm to 10.0 mm (Increments of 0.1 mm)—7 1/8"4 1/2"2 1/2"—000000000000
    Steel501.0 mm to 5.9 mm (Increments of 0.1 mm)—4 1/2"3 1/4"1"—000000000000
     
    For Inch, Wire Gauge, Letter Size Drill Bits
     
    For Jobbers' Length
    Steel191/16", 1/2", 1/4", 1/8", 21 Ga., 25 Ga., 37/64", 29 Ga., 3/16", 3/32", 3/8", 5/16", 5/32", 5/64", 7 Ga., 7/16", 7/32", F, U—7"4"1 1/4"—000000000000
    Steel1151/16" to 1/2" (Increments of 1/64"), 60 Ga. to 1 Ga., A to Z—13 1/2"4 5/8"2 1/4"—000000000000
    Steel1351/16" to 1/2" (Increments of 1/64"), 80 Ga. to 1 Ga., A to Z—13 1/2"4 5/8"2 1/4"—000000000000
     
    For Short Length
    Steel1151/16" to 1/2" (Increments of 1/64"), 60 Ga. to 1 Ga., A to Z—4 5/8"13 1/2"2 1/4"—000000000000
     
    For Inch, Wire Gauge, Metric Drill Bits
     
    For Jobbers' Length
    Steel1341.0 mm to 13.0 mm (Increments of 0.5 mm), 1/16" to 1/2" (Increments of 1/64"), 80 Ga. to 1 Ga.—13 1/2"4 5/8"2 1/4"—000000000000
     
    For Taps
    Image of Product. Front orientation. Tap and Drill Bit Stands. Tap and Drill Bit Cases, For Taps.
    These cases close for easy transport and are labeled with sizes for organizing tools. Taps are not included.
    Steel—Steel cases have stands that fold in and out. Stand them up when you need them, then fold them back into the slim case for storage inside a workbench drawer.
    Material
    No. of Taps
    Stored
    Holds Tap Sizes
    Lg.
    Wd.
    Ht.
    Each
    Steel21Three each of Nos. 6, 10
    Three each of 1/4", 5/16", 3/8", 7/16", 1/2"    		6 3/16"4 3/8"1 3/8"0000000000000
     
    For Taps and Drill Bits
    Image of Product. Front orientation. Tap and Drill Bit Stands. Tap and Drill Bit Cases, For Taps and Drill Bits.
    These cases close for easy transport and are labeled with sizes for organizing tools. Taps and drill bits are not included.
    Steel—Steel cases have stands that fold in and out. Stand them up when you need them, then fold them back into the slim case for storage inside a workbench drawer.
    Material
    No. of Taps
    Stored
    Holds Tap Sizes
    No. of Drill
    Bits Stored
    Holds Drill Bit Sizes
    Lg.
    Wd.
    Ht.
    Each
    Steel9One each of Nos. 6-32, 8-32, 10-24, 10-32
    One each of 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13    		9One each of Nos. 36, 29, 25, 21, 7
    One each of 5/16", 27/64"
    One each of F, U    		7"4"1 1/4"0000000000000
    Steel9One each of Nos. 6-40, 8-36, 10-24, 10-32
    One each of 1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20    		9One each of Nos. 33, 29, 25, 21, 3
    One each of 25/64", 29/64"
    One each of I, Q    		7"4"1 1/4"000000000000
    Steel9One each of M2.5 × 0.45, M3 × 0.5, M3.5 × 0.6, M4 × 0.7, M5 × 0.8, M6 × 1, M8 × 1.25, M10 × 1.5, M12 × 1.759One each of 2.05, 2.5, 2.9, 3.3, 4.2, 5, 6.7, 8.5, 10.2 mm7"4"1 1/4"000000000000
     

    Hex-Shank Tap and Drill Bit Sets for Drills and Powered Screwdrivers

    Image of Product. Front orientation. Tap and Drill Bit Sets. Hex-Shank Tap and Drill Bit Sets for Drills and Powered Screwdrivers.
    All taps and drill bits have a hex shank for direct connection to tools such as drills and power screwdrivers. They're made of high-speed steel and are for use on most metal and plastic. Taps have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping, but they’ll need space at the bottom of closed-end holes for chips to accumulate.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Includes
    Each
    Uncoated High-Speed Steel Tap
    13PlugM3 × 0.5 mm
    M4 × 0.7 mm
    M5 × 0.8 mm
    M6 × 1.0 mm
    M8 × 1.25 mm
    M10 × 1.5 mm    		1 19/64"
    1 27/64"
    1 35/64"
    1 37/64"    		Metric
    		3, 4
    2.5 mm
    3.3 mm
    4.2 mm
    5.0 mm
    6.8 mm
    8.5 mm    		Uncoated High-Speed SteelPlastic CaseChuck00000000000000
     

    Hex Shank Drill Tap Sets for Drills and Screwdrivers

    Image of Product. Front orientation. Drill Taps. Hex Shank Drill Tap Sets for Drills and Screwdrivers, Fabric Pouch.
    Image of Product. Front orientation. Drill Taps. Hex Shank Drill Tap Sets for Drills and Screwdrivers, Plastic Case.

    Fabric Pouch

    Plastic Case

    Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. Connect them directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank. They're made of high-speed steel and are for use on most metal and plastic. Their spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. Recommended for use in through holes, all have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.
    Titanium Nitride (TiN)-Coated High-Speed Steel—Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes Included
    No. of
    Flutes
    Drill Bit Sizes Included
    Container
    Type
    Includes
    Each
    Uncoated High-Speed Steel
    7Plug6-32
    8-32
    10-24
    1/4"-20
    5/16"-18
    3/8"-16    		25/16"
    36 ga.
    29 ga.
    25 ga.
    7 ga.
    F    		Fabric PouchChuck00000000000000
    7PlugM3 × 0.5 mm
    M4 × 0.7 mm
    M5 × 0.8 mm
    M6 × 1.0 mm
    M8 × 1.25 mm
    M10 × 1.5 mm    		23/32"
    1/8"
    11/64"
    13/64"
    17/64"
    31/64"    		Plastic CaseChuck0000000000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel
    7Plug6-32
    8-32
    10-24
    1/4"-20
    5/16"-18
    3/8"-16    		25/16"
    36 ga.
    29 ga.
    25 ga.
    7 ga.
    F    		Fabric PouchChuck0000000000000
     

    Tap and Drill Bit Stands

    For Drill Bits
    Image of Product. Front orientation. Tap and Drill Bit Stands. For Drill Bits.
    These stands hold one of each bit size. Each hole is marked with the size.
    For
    Drill Bit
    Overall
    Material
    No.
    of
    Size
    Lg.
    Wd.
    Ht.
    Each
    For Inch Drill Bits
     
    For Jobbers' Length, Short Length, Extended Length
    Steel291/16" to 1/2" (Increments of 1/64")5 5/8"2 5/8"1 1/2"0000000000000
    Steel331/2" to 1" (Increments of 1/64")13"5"2 3/4"000000000000
     
    For Letter Size Drill Bits
     
    For Jobbers' Length, Short Length, Extended Length
    Steel26A to Z5 5/8"2 5/8"1 1/2"000000000000
     
    For Taps and Drill Bits
    Image of Product. Front orientation. Tap and Drill Bit Stands. For Taps and Drill Bits.
    Keep taps and drill bits organized. All holes are labeled with sizes. Taps and drill bits are not included.
    Material
    No. of Taps
    Stored
    Holds Tap Sizes
    No. of Drill
    Bits Stored
    Holds Drill Bit Sizes
    Lg.
    Wd.
    Ht.
    Each
    Plastic16One each of M2, M3
    Two each of M4, M5, M6, M8, M10, M12, M14    		25Two each of 3.3 mm, 4.5 mm, 12 mm
    One each of 1.8 mm, 2.4 mm, 2.5 mm, 3.4 mm, 4.2 mm, 5 mm, 5.25 mm, 5.5 mm, 6.6 mm, 6.8 mm
    7 mm, 8.5 mm, 8.8 mm, 9 mm, 10.2 mm, 10.8 mm, 12.5 mm, 14 mm, 16 mm    		7"4 1/2"1 11/16"0000000000000
    Plastic26Two each of Nos. 2, 3, 4, 5, 6, 8, 10, 12
    Two each of 1/4", 5/16", 3/8", 7/16", 1/2"    		39Two each of 50 ga., 33 ga., 29 ga.
    One each of 47 ga., 45 ga., 44 ga., 43 ga., 42 ga., 39 ga.
    38 ga., 37 ga., 36 ga., 30 ga., 28 ga., 25 ga., 21 ga., 19 ga., 16 ga., 14 ga., 11 ga., 7 ga., 3 ga.
    One each of F, I, Q, U
    Two of 5/16"
    One each of 7/32", 1/4", 3/8", 25/64", 27/64", 7/16", 29/64", 1/2"    		7 3/8"4 11/16"1 11/16"000000000000
     

    Tap and Drill Bit Cabinets

    Image of Product. Front orientation. Cabinets. Tap and Drill Bit Cabinets.
    Drawers and labeled compartments provide space for keeping tools organized. Taps and drill bits are not included.
    Holds Tap Sizes
    Holds Drill Bit Sizes
    No. of
    Compartments
    No. of
    Drawers
    Lg.
    Wd.
    Ht.
    Material
    Includes
    Each
    For Taps
    Multiples of 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1"—26314 5/8"7 3/8"7 3/4"Steel—00000000000000
    Multiples of M3, M4, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M14, M16, M18, M20, M24—29314 5/8"7 3/8"7 3/4"Steel—0000000000000
    Multiples of Nos. 2-56, 3-48, 3-56, 4-40, 4-48, 5-40, 5-44, 6-32, 6-40, 8-32, 8-36, 10-24, 10-32, 12-24, 12-28—60514 5/8"7 3/8"7 3/4"Steel—0000000000000
    Multiples of Nos. 2, 3, 4, 5, 6, 8, 10, 12; Multiples of 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 3/8", 1 1/2"; Multiples of M2.5, M3, M4, M4.5, M5, M6. M6.3, M7, M8, M9, M10, M11, M12, M14, M16, M18, M20, M24, M30—152426"12"12 1/2"SteelLock, Two Keys0000000000000
     
    For Taps and Drill Bits
    Multiples of Nos. 6, 8, 10; Multiples of 1/4", 5/16", 3/8", 7/16", 1/2"Multiples of Nos. 36, 29, 25, 21, 7, 3; Multiples of F, I, U, Q; Multiples of 5/16", 25/64", 27/64", 29/64"29314 5/8"7 3/8"7 3/4"Steel—00000000000000
     
    For Pipe Taps
    Multiples of 1/16, 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 Pipe—21314 5/8"7 3/8"7 3/4"Steel—0000000000000
     

    Drill Bit Drawer Cabinets

    Image of Product. Front orientation. Cabinets. Drill Bit Drawer Cabinets.
    Store multiple bits of each size. These cabinets have drawers marked with the sizes and decimal equivalents. They can be stacked up to three high.
    For
    Drill Bit
    Overall
    No. of
    Compartments
    No. of
    Drawers
    Size, mm
    Lg. Class
    Lg.
    Wd.
    Ht.
    Material
    Features
    Includes
    Each
    For Inch Drill Bits
    2931/16" to 1/2" (Increments of 1/64")Jobbers
    		14 5/8"7 3/8"7 3/4"Steel——0000000000000
     
    For Wire Gauge Drill Bits
    60560 Ga. to 1 Ga.Jobbers
    		14 5/8"7 3/8"7 3/4"Steel——000000000000
    84580 Ga. to 1 Ga.Jobbers
    		14 5/8"7 3/8"7 3/4"Steel——000000000000
     
    For Letter Size Drill Bits
    283A to ZJobbers
    		14 5/8"7 3/8"7 3/4"Steel——000000000000
     
    For Metric Drill Bits
    2931.0 mm to 13.0 mm (Increments of 0.5 mm)Jobbers
    		14 5/8"7 3/8"7 3/4"Steel——000000000000
    6051.0 mm to 6.9 mm (Increments of 0.1 mm)Jobbers
    		14 5/8"7 3/8"7 3/4"Steel——000000000000
    13840.35 mm to 2.5 mm (Increments of 0.05 mm)
    2.6 mm to 10.0 mm (Increments of 0.1 mm)
    10.2
    10.5
    10.8
    11.0
    11.2
    11.5
    11.8
    12.0
    12.2
    12.5
    13.0    		Jobbers, Short
    		26"12"12 1/2"SteelBuilt-In Lock, Undivided bottom drawer for general storageTwo Keys0000000000000
     
    For Inch, Wire Gauge, Letter Size Drill Bits
    15941/16" to 1/2" (Increments of 1/64")
    60 Ga. to 1 Ga.
    A to Z    		Jobbers
    		26"12"12 1/2"SteelBuilt-In Lock, Undivided bottom drawer for general storageTwo Keys0000000000000
     

    Reduced-Shank Drill Bit Stands

    Image of Product. Front orientation. Tap and Drill Bit Stands. Reduced-Shank Drill Bit Stands.
    Each hole is sized to hold the 1/2" shank of a reduced-shank drill bit and marked with a bit size.
    For Drill Bits
    For
    Drill Bit
    Overall
    Material
    No.
    of
    Size
    Lg.
    Wd.
    Ht.
    Each
    For Inch Drill Bits
     
    1/2" Drill Bit Shank Size
    Steel331/2" to 1" (Increments of 1/64")13"5"2 3/4"0000000000000
     

    Magnetic Pouches for Drills

    Image of ProductInUse. Front orientation. Drill Bit Pouches. Magnetic Pouches for Drills.
    Image of Product. Front orientation. Drill Bit Pouches. Magnetic Pouches for Drills.
    This pouch fits onto most hand-held power drills and impact drivers. It has a magnetic panel on the front that can hold bits and fasteners for easy access.
    Pocket
    Wd.
    Ht.
    Wd.
    Ht.
    No. of
    Compartments
    Material
    Closure
    Method
    Color
    Includes
    Each
    For Inch, Metric, Letter Size, Wire Gauge Drill Bits
    4"3"3 3/4" to 4"3 1/4" to 3 1/2"1Nylon FabricZipperBlackAdhesive-Back Hook and Loop0000000000000
     

    Multi-Compartment Belt Pouches

    Image of Product. Front orientation. Tool Pouches. Multi-Compartment Belt Pouches, Style L.
    Image of Product. Front orientation. Tool Pouches. Multi-Compartment Belt Pouches, Style N.

    Style L

    Style N

    Slip these pouches onto your belt to keep several tools within reach.
    Styles L and N—Styles L and N have a magnetic panel on the front that can hold bits and fasteners for easy access.
    Style
    Wd.
    Dp.
    Ht.
    No. of
    Compartments
    For Max.
    Belt Wd.
    Closure
    Method
    Material
    Color
    Features
    Each
    L6 1/2"2 1/2"7 1/2"31 1/2"Open TopPolyester FabricGrayMagnetic Front0000000000000
    N7 1/2"2"11"23"BucklePolyester FabricBlackMagnetic Front000000000000

    Bur Containers

    Store and organize your burs with these containers. You can also use them to create a custom set from our offering of burs.
    Fabric Pouch
    Image of Product. Front orientation. Bur Containers. Fabric Pouch.
    Take burs on the go. These pouches roll up and fit in your pocket, so you can transport your burs without a bulky case.
    For No.
    of Burs
    For Shank
    Dia.
    For Overall
    Lg.
    Each
    41/4"2 1/4" to 3"0000000000000
    61/4"2 1/4" to 3"000000000000
    Plastic Case
    Image of Product. Front orientation. Bur Containers. Plastic Case.
    Quickly ensure your burs are put away at the end of the day. These cases have a transparent cover, so you can see if any burs are missing without needing to remove it.
    For No.
    of Burs
    For Shank
    Dia.
    For Overall
    Lg.
    Each
    51/4"1 1/2" to 3"0000000000000
    Wood Box
    Image of Product. Front orientation. Bur Containers. Wood Box.
    Our most durable containers to store your burs. These wood boxes resist cracking and breaking better than plastic ones.
    For No.
    of Burs
    For Shank
    Dia.
    For Overall Lg.
    Each
    51/8"1 1/2" to 2"0000000000000
    51/4"1 1/2" to 2"000000000000
    81/8"1 1/2" to 1 7/8"000000000000
    81/4"1 1/2" to 3"000000000000
    121/8"1 1/2"000000000000
    121/4"1 1/2" to 3"000000000000
    161/8"1 1/2" to 3"000000000000
    161/4"1 1/2" to 3"000000000000

    Compartmented Under-Table Drill Bit Drawer Cabinets

    Image of Product. Front orientation. Cabinets. Compartmented Under-Table Drill Bit Drawer Cabinets.
    Mount this cabinet underneath a workbench or shelf and store multiple drill bits of each size. The compartments are marked with the bit size and decimal equivalent.
    For
    Drill Bit
    Overall
    No. of
    Compartments
    No. of
    Drawers
    Size
    Lg. Class
    Lg.
    Wd.
    Ht.
    Material
    Features
    Includes
    Mounting Hole
    Dia. (No. of)
    Mounting Fasteners
    Included
    Each
    For Inch Drill Bits
    4211/16" to 1/2" (Increments of 1/64")Jobbers, Short
    		24 1/4"12 1/2"4 1/2"SteelBuilt-In LockTwo Keys1/4" (4)No00000000000000
     

    Under-Table Drill Bit Drawer Cabinets

    Image of Product. Front orientation. Cabinets. Under-Table Drill Bit Drawer Cabinets.
    Mount this cabinet underneath a workbench or shelf and store your drill bits in the undivided drawer.
    Overall
    No. of
    Compartments
    No. of
    Drawers
    For Lg. Class
    Lg.
    Wd.
    Ht.
    Material
    Features
    Includes
    Mounting Hole
    Dia. (No. of)
    Mounting Fasteners
    Included
    Each
    For Inch, Wire Gauge, Letter Size, Metric Drill Bits
    11Jobbers, Short
    		24 1/4"12 1/2"4 1/2"SteelBuilt-In LockTwo Keys1/4" (4)No00000000000000
     

    Reduced-Shank Drill Bit Drawer Cabinets

    Image of Product. Front orientation. Cabinets. Reduced-Shank Drill Bit Drawer Cabinets.
    Store two bits of each size. These cabinets have drawers marked with the bit sizes. They can be stacked up to three high.
    For
    Drill Bit
    Overall
    No. of
    Compartments
    No. of
    Drawers
    Size
    Shank
    Size
    Lg.
    Wd.
    Ht.
    Material
    Each
    For Inch Drill Bits
    2331", 1 1/32", 1 1/16", 1 1/8", 1 5/32", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2"1/2"14 5/8"7 3/8"7 3/4"Steel00000000000000
    60533/64" to 63/64" (Increments of 1/64")1/2"14 5/8"7 3/8"7 3/4"Steel0000000000000
     

    Drill Bit Pouches

    Image of Product. Front orientation. Contains Inset. Drill Bit Pouches. For 7 Drill Bits.
    Image of Product. Front orientation. Contains Inset. Drill Bit Pouches. For 15 Drill Bits.

    For 7 Drill Bits

    For 15 Drill Bits

    Attach these pouches to your belt to easily access drill bits while working.
    For
    Drill Bit
    Pocket
    No.
    of
    Size
    Lg.
    Class
    Wd.
    Ht.
    Wd.
    Ht.
    No. of
    Compartments
    Material
    Closure
    Method
    Color
    Includes
    Each
    For Inch Drill Bits
    71/16" to 1/4"Jobbers
    		3 1/4"4 3/4"1/2" to 3/4"2 1/4" to 2 3/4"7CanvasHook and LoopBlackPlastic Clip000000000000
    71/8" to 1/2"Jobbers
    		3 3/4"6 1/2"3/4" to 1"2 1/2" to 2 3/4"7CanvasHook and LoopBlackPlastic Clip00000000000
    151/16" to 1/2"Jobbers
    		5 1/4"7 1/4"1/2" to 1 1/2"1 3/4" to 5 1/2"15CanvasHook and LoopBlackPlastic Clip00000000000
     
    back to top