Larger OD tolerances than standard press-fit bushings allow for finishing. Bushings should be machine ground.

Choose the ID, OD, and length you need.

Made of durable tungsten carbide, these bushings outlast steel.

The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole.

Replace worn bushings and quickly change IDs without needing to repeatedly use a lever press. Instead of pressing bushings in and out of your jig fixture, which can cause damage, these bushings slide in and out of sleeves.

Designed to grip slippery plastic, the knurls on these bushings keep them from spinning while you drill. Their hold is stronger than serrated bushings, so they can withstand more force.

Serrations on these bushings dig into wood, aluminum, and other soft metals to keep them from spinning while you drill. Also known as jig bushings, they fit inside fixture plates to guide drill bits, counterbores, and reamers.

Also known as Oilite® bearings.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts.

A metal shell adds strength.

Graphite provides a layer of dry lubrication that can operate in high-temperature environments.

Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts.

Reduce your carbon footprint without sacrificing performance. Made of recycled thermoplastic, these bearings are a sustainable alternative to standard plastic dry-running bearings.

Made of thermoplastic, these bearings conduct electricity to prevent static buildup in moving equipment.

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

These bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Grooves on the inside of the bearing provide a flow path for lubricant, distributing it evenly along the bearing’s surface.

Use where high loads and speeds are not required.

Good for underwater applications, these bearings won’t swell or warp when wet.

A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

Compensating for minor shaft misalignment and not requiring lubrication, these sleeve bearings swivel to self-align and are dry running. They don’t need a housing and you can install and replace them without any tools because they’re slip fit.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

These bearings stand up to a wider range of chemicals than other dry-running thrust bearings.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. They’re thrust bearings, which means they support loads parallel to the shaft.

A metal backing adds strength.

A reliable classic—these babbitt bearings are strong and corrosion resistant.

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings withstand the widest temperature range of any of our mounted bearings.

Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.

Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.