Drill Bit Sizers | McMaster-Carr

For Pipe Size	For Pipe Fitting Size	Wd.	Ht.		Each







Plastic

Screws, Bolts, Threaded Rods, Drill Bits, Nails, Nuts, Tube Fittings, Pipe, Pipe Fittings, Tubing, Wire	No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", 5/16", 3/8", 7/16", 1/2", M3, M4, M5, M6, M8, M10, M12	1/32", 3/64", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2", 65 Ga., 60 Ga., 55 Ga., 50 Ga., 45 Ga., 40 Ga., 35 Ga., 30 Ga., 25 Ga., 20 Ga., 15 Ga., 10 Ga., 5 Ga., A, F, K, P, U, Z	1/16, 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4, 5, 6	1/16, 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2	10 1/2"	3 1/2"	20165A34	00000


Screws, Bolts, Threaded Rods, Drill Bits, Nails, Nuts, Tube Fittings, Pipe, Pipe Fittings, Tubing, Wire	No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", 5/16", 3/8", 7/16", 1/2", M3, M4, M5, M6, M8, M10, M12	1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8"	1/8, 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2	1/8, 1/4, 3/8, 1/2, 3/4, 1	8 11/16"	4 1/4"	20165A33	0000

Drill Bit Size Gauges


For Inch	For Letter Size	For Metric	For Wire Gauge

Measure drill bit sizes with these gauges.

For Taps—Drills/taps gauges include a tap size conversion chart.

For System of Measurement	For Use With	For Drill Bit Size	Wd.	Ht.	Thk.	Material	Color	Mounting Hole Dia.		Each
Inch	Drills	1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2"	2 1/2"	6 1/2"	5/64"	Steel	Silver	1/8"	8986A67	000000
Letter Size	Drills	A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z	2 1/2"	6 1/2"	5/64"	Steel	Silver	1/8"	8986A65	00000
Metric	Drills	1.5 mm, 2.0 mm, 2.25 mm, 2.5 mm, 2.75 mm, 3.0 mm, 3.25 mm, 3.5 mm, 3.75 mm, 4.0 mm, 4.25 mm, 4.5 mm, 4.75 mm, 5.0 mm, 5.25 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm, 10.0 mm, 10.5 mm, 11.0 mm, 11.5 mm, 12.0 mm, 12.5 mm	2 1/2"	6 1/2"	5/64"	Steel	Silver	1/8"	8986A64	00000
Wire Gauge	Drills	80 Ga., 79 Ga., 78 Ga., 77 Ga., 76 Ga., 75 Ga., 74 Ga., 73 Ga., 72 Ga., 71 Ga., 70 Ga., 69 Ga., 68 Ga., 67 Ga., 66 Ga., 65 Ga., 64 Ga., 63 Ga., 62 Ga., 61 Ga.	1"	3"	5/64"	Steel	Silver	1/8"	8986A66	00000
Wire Gauge	Drills/Taps	60 Ga., 59 Ga., 58 Ga., 57 Ga., 56 Ga., 55 Ga., 54 Ga., 53 Ga., 52 Ga., 51 Ga., 50 Ga., 49 Ga., 48 Ga., 47 Ga., 46 Ga., 45 Ga., 44 Ga., 43 Ga., 42 Ga., 41 Ga., 40 Ga., 39 Ga., 38 Ga., 37 Ga., 36 Ga., 35 Ga., 34 Ga., 33 Ga., 32 Ga., 31 Ga., 30 Ga., 29 Ga., 28 Ga., 27 Ga., 26 Ga., 25 Ga., 24 Ga., 23 Ga., 22 Ga., 21 Ga., 20 Ga., 19 Ga., 18 Ga., 17 Ga., 16 Ga., 15 Ga., 14 Ga., 13 Ga., 12 Ga., 11 Ga., 10 Ga., 9 Ga., 8 Ga., 7 Ga., 6 Ga., 5 Ga., 4 Ga., 3 Ga., 2 Ga., 1 Ga.	2 1/2"	6 1/2"	5/64"	Steel	Silver	1/8"	8986A68	00000

Tap and Drill Bit Stands

For Drill Bits

These stands hold one of each bit size. Each hole is marked with the size.

		For Drill Bit		Overall
	Material	No. of	Size	Lg.	Wd.	Ht.		Each
For Inch Drill Bits







				For Jobbers' Length, Short Length, Extended Length

				Steel	29	1/16" to 1/2" (Increments of 1/64")	5 5/8"	2 5/8"	1 1/2"	2793A12	000000


				Steel	33	1/2" to 1" (Increments of 1/64")	13"	5"	2 3/4"	2793A24	00000


				For Letter Size Drill Bits







								For Jobbers' Length, Short Length, Extended Length

								Steel	26	A to Z	5 5/8"	2 5/8"	1 1/2"	2793A18	00000

Drill Point Angle Gauges

Verify 118° drill point angles after sharpening. The ruler has a hook for alignment.

		Ruler
	For Use With	Lg.	Wd.	Front Graduation Marks (Numeric Increments)	Back Graduation Marks (Numeric Increments)	Lg.	Wd.	Thk.	Color	Graduation Color		Each
For Inch







				Steel

				118° Drills	6"	3/4"	1/64" (8/64"), 1/32" (4/32")	1/8" (1"), 1/16" (1")	6 1/4"	2 5/32"	3/64"	Silver	Black	8609A51	0000000

Tap and Drill Bit Cases

For Drill Bits


Steel	Plastic

Store and organize drill bits so they stay in good working condition and don't go missing. These cases have individually marked holes for each size in your set.

Steel—Steel cases have stands that fold in and out. Stand them up when you need them, then fold them back into the slim case for storage inside a workbench drawer.

Plastic—Plastic cases have screw-on lids to block out moisture. Compared to steel cases, they're lighter, and they resist rust and dents. Clip them onto your belt to take with you on the job.

		For Drill Bit		Overall
	Material	No. of	Size	Dia.	Lg.	Wd.	Ht.	Features		Each
For Inch Drill Bits







				For Jobbers' Length

				Steel	13	1/16" to 1/4" (Increments of 1/64")	—	5 3/8"	4"	3/8"	—	2961A33	00000


				Steel	15	1/16" to 1/2" (increments of 1/32")	—	7"	4"	1 1/4"	—	2961A22	00000
				Steel	16	1/64" to 1/4" (increments of 1/64")	—	5 3/8"	4"	3/8"	—	2961A27	00000
				Steel	21	1/16" to 3/8" (Increments of 1/64")	—	6"	4"	1 1/8"	—	2961A12	00000
				Steel	29	1/16" to 1/2" (Increments of 1/64")	—	7"	4"	1 3/4"	—	2961A11	00000
				Plastic	29	1/16" to 1/2" (Increments of 1/64")	3"	—	—	6 5/8"	Belt Clip	2961A61	00000




						For Maintenance Length

						Plastic	29	1/16" to 1/2" (Increments of 1/64")	3 7/8"	—	—	7"	Belt Clip	2961A75	00000




								For Short Length

								Steel	29	1/16" to 1/2" (Increments of 1/64")	—	7"	4"	1 3/4"	—	2961A72	00000




										For Extended Length—8" Maximum Drill Bit Length

										Steel	29	1/16" to 1/2" (Increments of 1/64")	—	8 3/4"	4"	1 3/4"	—	2961A34	00000




												For Reduced-Shank Length—1/2" Drill Bit Shank Size

												Steel	8	9/16" to 1" (increments of 1/16")	—	8 1/2"	6 1/4"	2"	—	2961A35	00000


												For Wire Gauge Drill Bits







																For Jobbers' Length

																Steel	20	80 Ga. to 61 Ga.	—	2"	1 1/2"	1/4"	—	2961A17	0000


																Steel	60	60 Ga. to 1 Ga.	—	4 1/2"	3 1/4"	1"	—	2961A16	00000




	For Short Length

	Steel																60	60 Ga. to 1 Ga.	—	4 1/2"	3 1/4"	1"	—	2961A73	00000


	For Letter Size Drill Bits







																		For Jobbers' Length

																		Steel	26	A to Z	—	7"	4"	1 3/4"	—	2961A19	00000




				For Short Length

				Steel	26															A to Z	—	7"	4"	1 3/4"	—	2961A71	00000


				For Metric Drill Bits







																				For Jobbers' Length

																				Steel	13	1.0 mm to 7.0 mm (Increments of 0.5 mm)	—	5 1/2"	4"	1/2"	—	2961A28	0000


								Steel	19											1.0 mm to 10.0 mm (Increments of 0.5 mm)	—	6"	4"	1 1/8"	—	2961A29	00000
								Steel	25											1.0 mm to 13.0 mm (Increments of 0.5 mm)	—	7"	4"	1 3/4"	—	2961A25	00000
								Steel	41											6.0 mm to 10.0 mm (Increments of 0.1 mm)	—	7 1/8"	4 1/2"	2 1/2"	—	2961A32	00000
								Steel	50											1.0 mm to 5.9 mm (Increments of 0.1 mm)	—	4 1/2"	3 1/4"	1"	—	2961A31	00000


								For Inch, Wire Gauge, Letter Size Drill Bits







												For Jobbers' Length

												Steel	19							1/16", 1/2", 1/4", 1/8", 21 Ga., 25 Ga., 37/64", 29 Ga., 3/16", 3/32", 3/8", 5/16", 5/32", 5/64", 7 Ga., 7/16", 7/32", F, U	—	7"	4"	1 1/4"	—	2961A43	00000


												Steel	115	1/16" to 1/2" (Increments of 1/64"), 60 Ga. to 1 Ga., A to Z	—					13 1/2"	4 5/8"	2 1/4"	—	2798A12	00000
												Steel	135	1/16" to 1/2" (Increments of 1/64"), 80 Ga. to 1 Ga., A to Z	—					13 1/2"	4 5/8"	2 1/4"	—	2798A13	00000




For Short Length

Steel														115	1/16" to 1/2" (Increments of 1/64"), 60 Ga. to 1 Ga., A to Z	—				4 5/8"	13 1/2"	2 1/4"	—	2961A74	00000


For Inch, Wire Gauge, Metric Drill Bits







															For Jobbers' Length

			Steel												134	1.0 mm to 13.0 mm (Increments of 0.5 mm), 1/16" to 1/2" (Increments of 1/64"), 80 Ga. to 1 Ga.				—	13 1/2"	4 5/8"	2 1/4"	—	2798A14	00000

Reduced-Shank Drill Bit Drawer Cabinets

Store two bits of each size. These cabinets have drawers marked with the bit sizes. They can be stacked up to three high.

					Overall
	Holds Drill Bit Sizes	For Drill Bit Length Class	No. of Compartments	No. of Drawers	Wd.	Dp.	Ht.	Material		Each
For Drill Bits







				For Inch Drill Bits

				1" to 1 1/2"	Jobbers	23	3	14 5/8"	7 3/8"	7 3/4"	Steel	2755A32	0000000


				33/64" to 63/64"	Jobbers	60	5	14 5/8"	7 3/8"	7 3/4"	Steel	2755A31	000000

Drill Bit Drawer Cabinets

Store multiple bits of each size. These cabinets have drawers marked with the sizes and decimal equivalents. They can be stacked up to three high.

					Overall
	Holds Drill Bit Sizes	For Drill Bit Length Class	No. of Compartments	No. of Drawers	Wd.	Dp.	Ht.	Material	Lock Type	No. of Keys Included	Features		Each
For Drill Bits







				For Inch Drill Bits

				1/16" to 1/2"	Jobbers, Maintenance, Short	29	3	14 5/8"	7 3/8"	7 3/4"	Steel	—	—	—	2962A1	0000000




						For Wire Gauge Drill Bits

						60 Ga. to 1 Ga.	Jobbers, Maintenance, Short	60	5	14 5/8"	7 3/8"	7 3/4"	Steel	—	—	—	2962A2	000000


						80 Ga. to 1 Ga.	Jobbers, Maintenance, Short	84	5	14 5/8"	7 3/8"	7 3/4"	Steel	—	—	—	2962A8	000000




								For Letter Size Drill Bits

								A to Z	Jobbers, Maintenance, Short	28	3	14 5/8"	7 3/8"	7 3/4"	Steel	—	—	—	2962A3	000000




										For Metric Drill Bits

										1.0 mm to 13.0 mm	Jobbers, Maintenance, Short	29	3	14 5/8"	7 3/8"	7 3/4"	Steel	—	—	—	2962A4	000000


										1.0 mm to 6.9 mm	Jobbers, Maintenance, Short	60	5	14 5/8"	7 3/8"	7 3/4"	Steel	—	—	—	2962A5	000000
										0.35 mm to 13.0 mm	Jobbers, Maintenance, Short	138	4	26"	12"	12 1/2"	Steel	Keyed	2	Undivided bottom drawer for general storage	8922A44	000000




												For Inch, Wire Gauge, Letter Size Drill Bits

												1/16" to 1/2" 60 Ga. to 1 Ga. A to Z	Jobbers, Maintenance, Short	159	4	26"	12"	12 1/2"	Steel	Keyed	2	Undivided bottom drawer for general storage	8922A31	000000

Reduced-Shank Drill Bit Stands

Each hole is sized to hold the _1/2" shank of a reduced-shank drill bit and marked with a bit size.

For Drill Bits

		For Drill Bit		Overall
	Material	No. of	Size	Lg.	Wd.	Ht.		Each
For Inch Drill Bits







				1/2" Drill Bit Shank Size

				Steel	33	1/2" to 1" (Increments of 1/64")	13"	5"	2 3/4"	2793A27	000000

Cutting Tool Workbench Drawers

Mount this drawer underneath a workbench or shelf and store multiple drill bits of each size. The compartments are marked with the bit size and decimal equivalent.

				Overall
	Holds Drill Bit Sizes	For Drill Bit Length Class	No. of Compartments	Wd.	Dp.	Ht.	Material	Lock Type	No. of Keys Included	Mounting Hole Dia. (No. of)	Mounting Fasteners Included		Each
For Inch Drill Bits



		1/16" to 1/2"	Jobbers, Maintenance, Short	42	24 1/4"	12 1/2"	4 1/2"	Steel	Keyed	2	1/4" (4)	No	2786A11	0000000

Magnetic Pouches for Drills

This pouch fits onto most hand-held power drills and impact drivers. It has a magnetic panel on the front that can hold bits and fasteners for easy access.

			Pocket
	Wd.	Ht.	Wd.	Ht.	No. of Compartments	Material	Closure Method	Color	Includes		Each
For Inch, Metric, Letter Size, Wire Gauge Drill Bits



		4"	3"	3 3/4" to 4"	3 1/4" to 3 1/2"	1	Nylon Fabric	Zipper	Black	Adhesive-Back Hook and Loop	2658N11	000000

Multi-Compartment Belt Pouches


Style L	Style N

Slip these pouches onto your belt to keep several tools within reach.

Styles L and N—Styles L and N have a magnetic panel on the front that can hold bits and fasteners for easy access.

Style	Wd.	Dp.	Ht.	No. of Compartments	For Max. Belt Wd.	Closure Method	Material	Color	Features		Each
L	6 1/2"	2 1/2"	7 1/2"	3	1 1/2"	Open Top	Polyester Fabric	Gray	Magnetic Front	2731N11	000000
N	7 1/2"	2"	11"	2	3"	Buckle	Polyester Fabric	Black	Magnetic Front	2731N12	00000

Drill Bit Pouches


For 7 Drill Bits	For 15 Drill Bits

Attach these pouches to your belt to easily access drill bits while working.

	For Drill Bit					Pocket
	No. of	Size	Lg. Class	Wd.	Ht.	Wd.	Ht.	No. of Compartments	Material	Closure Method	Color	Includes		Each
For Inch Drill Bits



		7	1/16" to 1/4"	Jobbers	3 1/4"	4 3/4"	1/2" to 3/4"	2 1/4" to 2 3/4"	7	Canvas	Hook and Loop	Black	Plastic Clip	2623N1	000000


		7	1/8" to 1/2"	Jobbers	3 3/4"	6 1/2"	3/4" to 1"	2 1/2" to 2 3/4"	7	Canvas	Hook and Loop	Black	Plastic Clip	2623N2	00000
		15	1/16" to 1/2"	Jobbers	5 1/4"	7 1/4"	1/2" to 1 1/2"	1 3/4" to 5 1/2"	15	Canvas	Hook and Loop	Black	Plastic Clip	2623N3	00000