Attach your square-drive sockets to drills, powered screwdrivers, and other tools that accept a hex shank.

Attach your impact square-drive sockets to power drills, impact drivers, and other tools that accept a hex shank.

Attach to your socket for a longer reach.

Attach one of these extensions to your impact socket to turn fasteners in hard-to-reach spaces.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Convert from one square drive size to another.

Reach a variety of spots by keeping common extension lengths on hand.

Convert your impact socket into a flex socket to access fasteners from an angle.

First developed for aerospace and automotive assembly processes, these extensions will stand up to your high-volume production and assembly lines.

These adapters, which convert from one square drive size to another, were designed to tolerate continuous use with impact tools in high-volume production and assembly.

These sockets are made to withstand the high torque and force of impact tools.

The short bit on these sockets fits in spaces where height clearance is limited.

Extra-long bits help you access hard-to-reach fasteners.

Achieve the best possible grip on hex fasteners and prevent rounding.

A magnet holds the fastener securely enough to drive self-tapping screws.

Tighten or loosen nuts and bolts without damaging the finish.

Attach these sockets to your spline-drive impact wrench.

Turn 5-point tamper-resistant nuts and bolts often found on water and gas valves.

Quickly position these sockets on square fasteners.

Pivot the head to access fasteners from an angle.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Extra-long bits allow access to hard-to-reach fasteners.

Tighten and loosen fasteners at an angle by pivoting the head on these sockets.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

The short Phillips bit on these sockets fits in spaces that screwdrivers can’t and where height clearance is limited.

An extra-long Phillips bit allows these sockets to reach far-away fasteners. Use them where standard or stubby sockets can’t reach.

These sockets are also known as Robertson bits.

An opening at the tip of these sockets fits around the security pin, allowing you to drive tamper-resistant Torx Plus screws.

The rounded-corner shape fits over ball joints commonly found in suspension and steering systems in vehicles.

These sockets are designed to tolerate continuous use with power tools and impact tools in high-volume production and assembly.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Pivot the head to access fasteners from an angle.

Turn square-drive fasteners in several sizes with these socket sets.

Pivot the head to access fasteners from an angle.

Tighten or loosen nuts and bolts without damaging the finish.

The Torx bit sockets in these sets fasten Torx screws often used in vehicles, bicycles, and electronics.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Extra-long bits allow access to hard-to-reach fasteners.

A spring-loaded ball on the bit holds fasteners in place as you drive them, including nonmagnetic fasteners like stainless steel screws.

Pivot the head of the sockets in these sets to access fasteners from an angle.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

When vertical space is tight or you need an extra twist on your socket, use one of the dual-drive Phillips bit sockets in this set.

Keep a convenient variety of drive styles and sizes of bit sockets on hand.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

The pin on these retainers is permanently connected to the ring, so they're less likely to dislodge when used with an impact wrench compared to two-piece retaining rings.