McMaster-Carr logo
    Filter by
    System of Measurement
    Drill Bit Size
    Industrial Info Compare
    Attribute Image
    Flute Direction
    Number of Flutes
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Industrial Info Compare
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Number of Sizes
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    80 Products
    About Drill Bits
    industrial info icon

    Compare material, finish, length class, and decimal size equivalents.

    High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Jobbers' Length, Round Shank.
    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Jobbers' Length, Morse Taper Shank.
    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Short Length, Round Shank.

    Jobbers' Length

    Round Shank

    Jobbers' Length

    Morse Taper Shank

    Short Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Maintenance Length, 3-Flat Shank, Round Shank.
    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Extended Length, Round Shank.

    Maintenance Length

    Round Shank

    3-Flat Shank

    Extended Length

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Standard

    Split

    Our basic drill bits are also the most versatile. Cut holes in a variety of metals, from the softest aluminum to the hardest steel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Maintenance Length—Shorter than jobbers' length, these bits are more rigid for less wobble when drilling hard material. Also known as mechanics’ bits.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron and titanium.
    Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Pkg.
    Qty.
    Pkg.
    Jobbers' Length
     
    Black Oxide
    13/32"
    		0.4063"
    		5 1/4"3.26"Round
    		13/32"Split
    		12901A135000000
    13/32"
    		0.4063"
    		5 1/4"3.26"Round
    		13/32"Split
    		62901A58600000
    13/32"
    		0.4063"
    		7"3.01"Morse Taper
    		Morse 1Standard
    		12929A35400000
     
    Titanium Nitride (TiN) Coated
    13/32"
    		0.4063"
    		5 1/4"3.26"Round
    		13/32"Split
    		129115A73500000
    13/32"
    		0.4063"
    		5 1/4"3.26"Round
    		13/32"Split
    		629115A83500000
     
    Titanium Aluminum Nitride (TiAlN) Coated
    13/32"
    		0.4063"
    		5 1/4"3.26"Round
    		13/32"Split
    		13202A6800000
     
    Uncoated
    13/32"
    		0.4063"
    		5 1/4"3.26"Round
    		13/32"Standard
    		18870A380000
    13/32"
    		0.4063"
    		5 1/4"3.26"Round
    		13/32"Standard
    		68870A13800000
     
    Short Length
     
    Black Oxide
    13/32"
    		0.4063"
    		3 3/8"1.32"Round
    		13/32"Split
    		12896A360000
    13/32"
    		0.4063"
    		3 3/8"1.32"Round
    		13/32"Split
    		62896A17400000
     
    Titanium Nitride (TiN) Coated
    13/32"
    		0.4063"
    		3 3/8"1.32"Round
    		13/32"Split
    		12908A5500000
    13/32"
    		0.4063"
    		3 3/8"1.32"Round
    		13/32"Split
    		32908A2900000
     
    Uncoated
    13/32"
    		0.4063"
    		3 3/8"1.32"Round
    		13/32"Standard
    		18947A1350000
     
    Maintenance Length
     
    Gold Oxide
    13/32"
    		0.4063"
    		4 3/8"2.68"Round/3-Flat
    		13/32"Split
    		187755A4500000
    13/32"
    		0.4063"
    		4 3/8"2.68"Round/3-Flat
    		13/32"Split
    		687755A2500000
     
    Extended Length
     
    Black Oxide
    13/32"
    		0.4063"
    		7"3.76"Round
    		13/32"Standard
    		129315A14700000
     
    Titanium Nitride (TiN) Coated
    13/32"
    		0.4063"
    		7"4.38"Round
    		13/32"Standard
    		128965A75100000
     
    Uncoated
    13/32"
    		0.4063"
    		8"5.18"Round
    		13/32"Standard
    		129515A7100000
    13/32"
    		0.4063"
    		12"8.18"Round
    		13/32"Standard
    		12939A3100000
    13/32"
    		0.4063"
    		18"12.18"Round
    		13/32"Standard
    		12955A2600000
     

    High-Speed Steel Step Drill Bits

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Step Drill Bits.
    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    Drill multiple hole sizes using only one bit. These have steps with progressively larger diameters—the deeper they drill, the bigger the hole. Count the steps as you drill to achieve the proper size. These bits also deburr as they cut, so they're good for thin materials like sheet metal and plastic panels. Wear and heat resistant, high-speed steel is versatile for use on a range of materials.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Drill Bit Size
    Decimal Size Equiv.
    Overall
    Lg.
    Type
    Size
    Drill Bit
    Point Type
    Each
     
    Black Oxide
    1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2"
    		0.125", 0.1563", 0.1875", 0.2188", 0.25", 0.2813", 0.3125", 0.3438", 0.375", 0.4063", 0.4375", 0.4688", 0.5"
    		3 1/8"Round/3-Flat
    		1/4"Standard
    		5910N11000000
     
    Titanium Nitride (TiN) Coated
    1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2"
    		0.125", 0.1563", 0.1875", 0.2188", 0.25", 0.2813", 0.3125", 0.3438", 0.375", 0.4063", 0.4375", 0.4688", 0.5"
    		3 1/4"Hex
    		1/4"Standard
    		89315A4100000
     
    Uncoated
    1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2"
    		0.125", 0.1563", 0.1875", 0.2188", 0.25", 0.2813", 0.3125", 0.3438", 0.375", 0.4063", 0.4375", 0.4688", 0.5"
    		3 1/4"Hex
    		1/4"Standard
    		8841A2100000
     

    Cobalt Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Cobalt Steel Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. Cobalt Steel Drill Bits, Jobbers' Length, Morse Taper Shank.

    Jobbers' Length

    Morse Taper Shank

    Image of Product. Front orientation. Drill Bits. Cobalt Steel Drill Bits, Jobbers' Length, Hex Shank.

    Jobbers' Length

    Hex Shank

    Image of Product. Front orientation. Drill Bits. Cobalt Steel Drill Bits, Short Length, Round Shank.

    Short Length

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron, titanium, and fiberglass.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Titanium Nitride (TiN) Coated
    13/32"
    		0.4063"
    		5 1/4"3.88"Round
    		13/32"Split
    		27995A535000000
     
    Titanium Aluminum Nitride (TiAlN) Coated
    13/32"
    		0.4063"
    		5 1/4"2.82"Round
    		13/32"Split
    		2753A14700000
     
    Uncoated
    13/32"
    		0.4062"
    		5 1/4"2.77"Hex
    		13/32"Split
    		4909N2600000
    13/32"
    		0.4063"
    		5 1/4"3.2"Round
    		13/32"Split
    		3069A3600000
    13/32"
    		0.4063"
    		7 1/2"3.63"Morse Taper
    		Morse 2Split
    		3068A1600000
     
    Short Length
     
    Titanium Nitride (TiN) Coated
    13/32"
    		0.4063"
    		3 5/16"1.32"Round
    		13/32"Split
    		2416A3500000
     
    Uncoated
    13/32"
    		0.4063"
    		3 3/8"1.32"Round
    		13/32"Split
    		28765A3500000
     

    Cobalt Steel Step Drill Bits

    Image of Product. Side1 orientation. Drill Bits. Cobalt Steel Step Drill Bits.
    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    One cobalt bit drills multiple hole sizes and lasts twice as long as high-speed steel. They have steps with progressively larger diameters—the deeper they drill, the bigger the hole. Count the steps as you drill to achieve the proper size. These bits also deburr as they cut, so they're good for thin materials like sheet metal and plastic panels. Wear and heat resistant, high-speed steel is versatile for use on a range of materials.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Drill Bit Size
    Decimal Size Equiv.
    Overall
    Lg.
    Type
    Size
    Drill Bit
    Point Type
    Each
     
    Uncoated
    1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2"
    		0.125", 0.1563", 0.1875", 0.2188", 0.25", 0.2813", 0.3125", 0.3438", 0.375", 0.4063", 0.4375", 0.4688", 0.5"
    		3 1/4"Hex
    		1/4"Standard
    		8841A51000000
     

    Carbide Drill Bits

    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits, Jobbers' Length, Round Shank.
    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits, Short Length, Round Shank.

    Jobbers' Length

    Round Shank

    Short Length

    Round Shank

    The hardest and most wear-resistant drill bits you can buy. Carbide bits stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. They last 10 to 20 times longer than their closest alternative, cobalt steel. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.
    Titanium Aluminum Nitride (TiAlN) Coated—No drill bits last longer. These are the best for high-speed, high-temperature drilling of very hard and abrasive materials, including titanium and fiberglass.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit Point
    Type
    Each
    Jobbers' Length
     
    Titanium Nitride (TiN) Coated
    13/32"
    		0.4063"
    		4 1/2"2.3"Round
    		13/32"Four Facet
    		27515A530000000
     
    Titanium Aluminum Nitride (TiAlN) Coated
    13/32"
    		0.4063"
    		4 1/2"2.3"Round
    		13/32"Four Facet
    		8879A71000000
     
    Uncoated
    13/32"
    		0.4063"
    		4 1/2"2.3"Round
    		13/32"Four Facet
    		2956A35000000
     
    Short Length
     
    Uncoated
    13/32"
    		0.4063"
    		3"1"Round
    		13/32"Four Facet
    		2956A5300000
     

    Drill Bit Sharpeners

    Image of Product. Front orientation. Drill Bit Sharpeners.
    Use for occasional sharpening.
    For Drill Bit
    Size
    Lg.
    Point
    Angle
    Point Type
    Max. Rotation
    Speed, rpm
    Voltage,
    V AC
    Current,
    amp
    Lg.
    Wd.
    Ht.
    Features
    Includes
    Each
    For Steel, High-Speed Steel, Cobalt Steel, and Carbide Spiral Drill Bits
    1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8", 13/32", 7/16", 1/2"Any95° to 135°Standard, Split
    		4,4001201.611"6"6 1/2"Adjustable Point Angle230-Grit cubic boron nitride grinding wheel4440A450000000
     
    Replacements for Drill Bit Sharpeners
    Each
    Replacement Cubic Boron Nitride Wheel—230 grit (Smooth Finish)4440A460000000
    Replacement Chuck4440A4700000

    Carbide-Tipped Drill Bits

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits, Short Length, Round Shank.

    Short Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits, Extended Length, Round Shank.

    Extended Length

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Standard

    Split

    Performance similar to solid carbide but at a lower price point. Like carbide bits, these are stronger than cobalt and high-speed steel and maintain their sharp edges when drilling abrasive material. However, when drilling tough metals like iron and hardened steel, upgrade to carbide for longer life.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Uncoated
    13/32"
    		0.4063"
    		5 1/4"3"Round
    		13/32"Standard
    		2940A33000000
    13/32"
    		0.4063"
    		5 1/4"3"Round
    		13/32"Split
    		31575A2500000
     
    Short Length
     
    Uncoated
    13/32"
    		0.4063"
    		3 3/8"1.2"Round
    		13/32"Standard
    		28805A23100000
    13/32"
    		0.4063"
    		3 3/8"1.2"Round
    		13/32"Split
    		2750A3100000
     
    Extended Length
     
    Uncoated
    13/32"
    		0.4063"
    		7"3.56"Round
    		13/32"Standard
    		29465A3100000
     

    Drill Bit Size Gauges

    Image of Product. Front orientation. Drill Bit Size Gauges. For Inch.

    For Inch

    Measure drill bit sizes with these gauges.
    For System of
    Measurement
    For Use
    With
    For Drill Bit Size
    Wd.
    Ht.
    Thk.
    Material
    Color
    Mounting
    Hole Dia.
    Each
    InchDrills1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2"2 1/2"6 1/2"5/64"SteelSilver1/8"8986A67000000

    Coolant-Fed Carbide-Tipped Drill Bits

    Image of Product. Front orientation. Contains Inset. Drill Bits. Coolant-Fed Carbide-Tipped Drill Bits, Extended Length, Round Shank.
    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Extended Length

    Round Shank

    Standard

    Channel coolant through the holes to reduce heat and evacuate chips more efficiently than other bits. These are designed for CNC machines that supply coolant through the spindle rather than an external source, such as a hose and nozzle. Coolant flows directly from the bit's tip onto the drilling surface. This speeds up cuts and leads to excellent performance in deep holes and tough materials such as stainless steel and titanium. A lower-price alternative to solid carbide, they stay sharp when drilling abrasive material but won’t last as long.
    Extended Length—Also known as gun drills, drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Extended Length
     
    Uncoated
    13/32"
    		0.4063"
    		10"7"Round
    		0.7498"Standard
    		2744N7970000000
    13/32"
    		0.4063"
    		12"8.5"Round
    		0.7498"Standard
    		2744N831000000
    13/32"
    		0.4063"
    		16"12.5"Round
    		0.7498"Standard
    		2744N835000000
    13/32"
    		0.4063"
    		22"18"Round
    		0.7498"Standard
    		2744N84000000
    13/32"
    		0.4063"
    		28"24"Round
    		0.7498"Standard
    		2744N861000000
    13/32"
    		0.4063"
    		36"32"Round
    		0.7498"Standard
    		2744N876000000
     

    Spot-Weld-Removal High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Spot-Weld-Removal High-Speed Steel Drill Bits, Round Shank.

    Round Shank

    Three drill points cut just deep enough to separate welded metal panels without drilling all the way through them. Unlike chiseling or grinding through spot welds, these bits won't damage the surrounding material. High-speed steel is the versatile choice for drilling most metals.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
     
    Uncoated
    13/32"
    		0.406"
    		2 1/4"0.07"Round
    		13/32"Brad
    		2641N7000000
     

    High-Speed Steel Precise-Cut Drill Bits for Wood

    Image of Product. Front orientation. Contains Inset, MultipleImages. Drill Bits. High-Speed Steel Precise-Cut Drill Bits for Wood.
    Wear and heat resistant, these stay sharp longer than precise-cut bits made of plain steel. The sharp center point keeps the bit from wandering during drilling to cut accurate straight and overlapping holes, even across the grain. Also known as brad-point bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Shank
    Size
    Drill Bit
    Point Type
    Each
    Uncoated
     
    Round Shank
    13/32"
    		0.4063"
    		5 1/4"3.88"7/16"Brad
    		2926A122000000
     

    Reduced-Shank High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Reduced-Shank High-Speed Steel Drill Bits, Jobbers' Length.

    Jobbers' Length

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Standard

    Split

    Cut large holes with drill presses and portable drills that have a standard-size chuck. The shank on these bits has a smaller diameter than the cutting tip. High-speed steel is good for general purpose drilling in most metals. Also known as Silver and Deming bits.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Black Oxide
    13/32"
    		0.4063"
    		4 1/2"2.75"Reduced Round
    		1/4"Standard
    		3038A21000000
    13/32"
    		0.4063"
    		5 1/4"3.88"Reduced Round
    		3/8"Split
    		8773A5200000
     

    Chip-Clearing High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits, Jobbers' Length, High Helix Flute, Round Shank.
    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits, Jobbers' Length, Parabolic Flute, Round Shank.

    Jobbers' Length

    High Helix Flute

    Round Shank

    Jobbers' Length

    Parabolic Flute

    Round Shank

    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits, Extended Length, Parabolic Flute, Round Shank.

    Extended Length

    Parabolic Flute

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    With flutes that lift chips out of the hole, you don't have to stop drilling to clear these bits manually. They improve coolant flow to dissipate heat and prevent clogs that can damage the bit and ruin the hole. High-speed steel is good for general purpose drilling in most metals.
    High Helix Flute—Less aggressive than parabolic flutes for cleaner cuts in soft metals.
    Parabolic Flute—A U-shaped groove on the flutes cuts faster and clears chips more quickly than high-helix bits, so these are better for drilling deeper holes.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Black Oxide
    13/32"
    		0.4063"
    		5 1/4"2.62"High HelixRound
    		13/32"Split
    		31115A65000000
    13/32"
    		0.4063"
    		5 1/4"3.06"ParabolicRound
    		13/32"Split
    		29925A3500000
     
    Titanium Nitride (TiN) Coated
    13/32"
    		0.4063"
    		5 1/4"3.06"ParabolicRound
    		13/32"Split
    		29925A7500000
     
    Uncoated
    13/32"
    		0.4063"
    		5 1/4"3.06"ParabolicRound
    		13/32"Split
    		2754A6500000
    13/32"
    		0.4063"
    		5 1/4"3.26"High HelixRound
    		13/32"Standard
    		2912A13500000
     
    Extended Length
     
    Uncoated
    13/32"
    		0.4063"
    		12"8.18"ParabolicRound
    		13/32"Split
    		29745A8100000
     

    Left-Hand Cobalt Steel Drill Bits

    Image of Product. Side1 orientation. Drill Bits. Left-Hand Cobalt Steel Drill Bits, Maintenance Length, Round Shank.

    Maintenance Length

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    The flutes spiral in the opposite direction of other bits and stay sharp longer than high-speed steel. They’re primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits.
    Maintenance Length—Shorter than jobbers' length, these bits are more rigid for less wobble when drilling hard material. Also known as mechanics’ bits.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Each
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    1-5
    6-Up
    Maintenance Length
     
    Uncoated
    13/32"
    		0.4063"
    		4 3/8"2.14"Round
    		13/32"Split
    		3474A24000000000000
     

    Short-Flute High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Short-Flute High-Speed Steel Drill Bits, Extended Length, Round Shank.

    Extended Length

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    The rigidity of short-length bits without sacrificing reach. The shallow drilling depth makes these less likely to wobble than other bits of the same length, so they stay centered and drill straighter. High-speed steel is good for general purpose drilling in most metals.
    Extended Length—Drill through panels and thick workpieces with our longest bits.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Extended Length
     
    Black Oxide
    13/32"
    		0.4063"
    		6"3.3"Round
    		13/32"Split
    		2986A36000000
    13/32"
    		0.4063"
    		12"3.3"Round
    		13/32"Split
    		2986A7100000
     

    Drill Bit Guides

    Image of ProductInUse. Front orientation. Contains Annotated, MultipleImages. Drill Bit Guides. Drill Bit Guides.
    Image of Product. Front orientation. Drill Bit Guides. Drill Bit Guides.
    Place these guides on your workpiece to drill precise holes without building a fixture. They'll even work on corners and round surfaces. Lines marked on the side allow you to align your holes accurately. Made of hardened steel, they’re tough enough to withstand frequent use.
    For Drill Bit Size
    For Drill Bit Size Decimal Equiv.
    Lg.
    Wd.
    Ht.
    Material
    Each
    3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2"0.375", 0.3906", 0.4063", 0.4219", 0.4375", 0.4531", 0.4688", 0.4844", 0.5"5 1/4"1"7/8"Steel9550T16000000

    Carbide Drill Bits for Carbon Fiber, Fiberglass, and Graphite

    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits for Carbon Fiber, Fiberglass, and Graphite, Jobbers' Length.

    Jobbers' Length

    Cut clean holes in abrasive material without fraying or delaminating the surface. Made of carbide, these bits resist wear to retain a sharp edge, even after after hundreds of cuts.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Point
    Angle
    Drill Bit
    Point Type
    Bit
    Style
    Each
    Jobbers' Length
     
    Uncoated
    13/32"
    		0.4063"
    		4 1/2"2.3"Round
    		13/32"140°Brad
    		Fluted2828A240000000
     

    High-Speed Steel Drill Bits for Plastic

    The precision-ground, 60° point penetrates gradually to prevent cracking and chipping. It also reduces heat that can deform the material. Use these bits for drilling into acrylic, laminate, and other plastics. They're made of wear-resistant high-speed steel.
    Jobbers' LengthAbout Jobbers' Length
    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits for Plastic, Jobbers' Length.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Point
    Angle
    Drill Bit
    Point Type
    Each
    Uncoated
    13/32"
    		0.4063"
    		5 1/4"3.88"Round
    		13/32"60°Standard
    		27465A64000000
     

    Carbide-Tipped Drill Bits for Hardened Steel

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits for Hardened Steel, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Straight flutes withstand the heavy pressure needed to penetrate hardened steel. These bits cut more aggressively and resist stress better than spiral-flute bits. A lower-priced alternative to solid carbide, they stay sharp when drilling abrasive material but won’t last as long.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Uncoated
    13/32"
    		0.4063"
    		5 1/4"1.62"Round
    		13/32"Notched
    		2973A35000000
     

    Chip-Clearing Cobalt Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Chip-Clearing Cobalt Steel Drill Bits, Jobbers' Length, Parabolic Flute, Round Shank.

    Jobbers' Length

    Parabolic Flute

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    Avoid clogs and dissipate heat with cobalt bits that last at least twice as long as high-speed steel. The flutes clear chips to improve coolant flow and prevent damage to the bit and the hole. They also speed up drilling since you don't have to stop to clear the bit manually.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Titanium Nitride (TiN) Coated
    13/32"
    		0.4063"
    		5 1/4"3.4"ParabolicRound
    		13/32"Split
    		3183A65000000
     
    Uncoated
    13/32"
    		0.4063"
    		5 1/4"3.4"ParabolicRound
    		13/32"Split
    		29925A93500000
     

    Carbide Drill Bits for Sheet Metal

    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits for Sheet Metal, Short Length, Round Shank.

    Short Length

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    The hardest and most wear-resistant bits for sheet metal and thin-wall tubing. They have short flutes that make shallow cuts without snagging and deforming the material. Carbide stays sharp at high temperatures and faster speeds than high-speed steel. It can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    No. of Drilling
    Ends
    Each
    Short Length
     
    Uncoated
    13/32"
    		0.4063"
    		2 1/2"0.63"Round
    		13/32"Standard
    		18769A33000000
     

    Chip-Clearing High-Speed Steel Drill Bits for Aluminum, Brass, and Bronze

    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits for Aluminum, Brass, and Bronze, Jobbers' Length, Low Helix Flute, Round Shank.

    Jobbers' Length

    Low Helix Flute

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    Designed for soft metals that can gum up other drill bits, wide flutes lift chips out of the hole. This prevents clogs that can weaken and damage the bit and ruin the hole. Also known as slow spiral bits, these are made of versatile high-speed steel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Each
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    1-5
    6-Up
    Jobbers' Length
     
    Uncoated
    13/32"
    		0.4063"
    		5 1/4"3.06"Low HelixRound
    		13/32"Standard
    		2928A235000000000000
     

    Short-Flute Cobalt Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Short-Flute Cobalt Steel Drill Bits, Jobbers' Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Jobbers' Length

    Round Shank

    Split

    These bits combine the toughness and wear resistance of cobalt with short flutes for rigidity. The shallow drilling depth makes them less likely to wobble than other bits of the same length, so they stay centered and drill straighter. Cobalt lasts at least twice as long as high-speed steel. It can also run up to 25% faster at higher temperatures without damaging the bit on hard materials such as nickel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Shank
    Each
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    1-4
    5-Up
    Jobbers' Length
     
    Black Oxide
    13/32"
    		0.4063"
    		5 1/4"1.33"Round
    		13/32"Split
    		3146A136000000000000
     

    Helical Threaded Insert Assortments with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Helical Threaded Insert Assortments with Installation Tools.
    Repair damaged threads or create new ones. These convenient assortments include helical inserts, an installation tool for each thread size, a drill bit, and a tap. The inserts are also known as Heli-Coil inserts.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    No. of Inserts
    Included
    Includes
    Thread
    Spacing
    Drill Bit Size
    For Max. Hole Dia.
    Each
    Pronged
     
    18-8 Stainless Steel
    18Drill Bit
    Installation Tool
    M10×1.5 mm Thread × 10 mm Installed Lg. (6 Each)
    M10×1.5 mm Thread × 15 mm Installed Lg. (6 Each)
    M10×1.5 mm Thread × 20 mm Installed Lg. (6 Each)
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		13/32"
    		0.406"91732A955000000
    18Drill Bit
    Installation Tool
    M10×1 mm Thread × 10 mm Installed Lg. (6 Each)
    M10×1 mm Thread × 15 mm Installed Lg. (6 Each)
    M10×1 mm Thread × 20 mm Installed Lg. (6 Each)
    Prong Break-Off Tool
    Through-Hole Tap    		Fine
    		13/32"
    		0.406"91732A95900000
    48Drill Bits
    Installation Tools
    M5×0.8 mm Thread × 7.5 mm Installed Lg. (12 Each)
    M6×1 mm Thread × 9 mm Installed Lg. (12 Each)
    M8×1.25 mm Thread × 12 mm Installed Lg. (12 Each)
    M10×1.5 mm Thread × 15 mm Installed Lg. (12 Each)
    Through-Hole Taps    		Coarse
    		13/64"
    1/4"
    21/64"
    13/32"
    		0.203"
    0.250"
    0.328"
    0.406"    		90285A131000000
     

    Depth-Limiting Drill Stops

    Image of ProductInUse. Front orientation. Drill Stops.
    Ensure identical hole depths every time. Position the collar on your bit and tighten the set screw.
    For Drill
    Bit Size
    For Drill Bit Size
    Decimal Equiv.
    Overall
    Lg.
    OD
    Hex Key Size
    for Set Screw
    Material
    Each
    For Inch Drill Bits
    13/32"0.4063"7/8"7/8"1/8"Steel8865A22500000
     

    M2 High-Speed Tool Steel Rod Sets

    Image of Product. Front orientation. Steel. M2 High-Speed Tool Steel Rod Sets.
    Supplied in a metal index case with fold-out panels, these rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits. They are hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
    Includes
    No. of
    Pieces
    Dia.
    Tolerance
    Mechanical
    Finish
    Each
    Sizes 1/16"-1/2" (×1/64ths increments) and a metal index case29-0.0002" to 0"Precision Ground2952A50000000

    Tight-Tolerance Water-Hardening W1 Tool Steel Rods

    Image of Product. Front orientation. Steel. Tight-Tolerance Water-Hardening W1 Tool Steel Rods.
    Ready for turning in your lathe, these rods are precision ground and held to strict diameter and straightness tolerances. Also known as drill rod. With far less alloy content than other tool steel, W1 is the most machinable we offer. These rods are often used to make hammers, files, and reamers—tools that don't require the dimensional stability of A2 or O1. These rods are also decarb-free, which means any surface flaws created during the manufacturing process have been removed. This makes them even more machinable and leads to better results from heat treating or finishing. Heat treat the surface for extra wear resistance. Or, quench this steel in water to boost its hardness and strength, giving it a sharper, more durable edge for small tools.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Dia.
    Dia. Tolerance
    Drill Bit
    Size
    Fabrication
    Heat
    Treatment
    Yield Strength,
    psi
    Mechanical
    Finish
    Hardness
    Max. Hardness After
    Heat Treatment
    Specs.
    Met
    3 ft.
    Long
    6 ft.
    Long
    0.4062"-0.001" to 0.001"13/32"
    		Hot RolledAnnealed50,000Precision GroundRockwell B95 (Medium)Rockwell C65ASTM A6868890K256000000000000

    Left-Hand High-Speed Steel Drill Bits

    Image of Product. Side1 orientation. Drill Bits. Left-Hand High-Speed Steel Drill Bits, Jobbers' Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Jobbers' Length

    Round Shank

    Split

    With flutes that spiral in the opposite direction of other bits, these are primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits. High-speed steel is the versatile choice for drilling most metals.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Each
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    1-5
    6-Up
    Jobbers' Length
     
    Uncoated
    13/32"
    		0.4063"
    		5 1/4"3.06"Round
    		13/32"Split
    		2876A371000000000000
     

    Undersized Hardened Multipurpose M2 High-Speed Tool Steel Rods

    Image of Product. Front orientation. Steel. Undersized Hardened Multipurpose M2 High-Speed Tool Steel Rods.
    These rods, also known as drill blanks, have an undersized diameter for machining your own drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Dia.
    Dia.
    Tolerance
    Drill Bit
    Size
    Lg.
    Yield
    Strength
    Hardness
    Mechanical
    Finish
    Each
    0.4062"-0.0002" to 0"13/32"
    		5 1/4"Not RatedRockwell C60 (Extra Hard)Precision Ground3009A138000000
    back to top