17/64" Drill Bits | McMaster-Carr

Filter by

System of Measurement

Drill Bit Size

0.35 mm to 2.5 mm (Increments of 0.05 mm)

1", 1 1/32", 1 1/16", 1 1/8", 1 5/32", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2"

1.0 mm to 10.0 mm (Increments of 0.5 mm)

1.0 mm to 13.0 mm (Increments of 0.5 mm)

1.0 mm to 5.9 mm (Increments of 0.1 mm)

1.0 mm to 6.9 mm (Increments of 0.1 mm)

1.0 mm to 7.0 mm (Increments of 0.5 mm)

1/16" to 1/2" (Increments of 1/64")

1/16" to 1/2" (increments of 1/32")

1/16" to 1/4" (Increments of 1/64")

1/16" to 3/8" (Increments of 1/64")

1/2" to 1" (Increments of 1/64")

1/64" to 1/4" (increments of 1/64")

2.6 mm to 10.0 mm (Increments of 0.1 mm)

6.0 mm to 10.0 mm (Increments of 0.1 mm)

9/16" to 1" (increments of 1/16")

33/64" to 63/64" (Increments of 1/64")

Length Class

For Use On

Shank Type

Finish

Titanium Aluminum Nitride (TiAlN) Coated

Titanium Nitride (TiN) Coated

Drill Bit Point Type

Material

Point Angle

Decimal Size Equivalent

Shank Size

Flute Direction

Maximum Drilling Depth

Sold As

Flute Type

Number of Flutes

Thread Size

Bit Style

Manufacturer

Viking Norseman Drill

W. L. Fuller

Export Control Classification Number (ECCN)

EAR99

REACH

Compliant

Not Compliant

DFARS Specialty Metals

RoHS

Compliant with Exemptions

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Forward

How can we improve?

90 Products

About Drill Bits

Compare material, finish, length class, and decimal size equivalents.

Drill Bits

Sold Individually

High-Speed Steel Drill Bits

Cut holes in a variety of metals, from the softest aluminum to the hardest steel

21 products

Cobalt Steel Drill Bits

Tough and wear resistant to last at least twice as long as high-speed steel bits

10 products

Carbide Drill Bits

The hardest and most wear-resistant drill bits you can buy

4 products

Carbide-Tipped Drill Bits

Stronger than cobalt and high-speed steel, bits stay sharp at high temperatures

5 products

High-Speed Steel Precise-Cut Drill Bits for Wood

Point stays sharp longer to cut accurate straight and overlapping holes

1 product

Reduced-Shank High-Speed Steel Drill Bits

Make large holes using standard-size tools

1 product

Chip-Clearing High-Speed Steel Drill Bits

Prevent clogs and dissipate heat when drilling most metals

7 products

Short-Flute High-Speed Steel Drill Bits

The rigidity of short-length bits without sacrificing reach

2 products

High-Speed Steel Drill Bits for Plastic

Penetrate gradually to prevent cracking and chipping

1 product

Coolant-Fed Carbide-Tipped Drill Bits

Coolant flows through the bit to reduce heat and evacuate chips

5 products

Carbide Drill Bits for Hardened Steel

The hardest and most wear-resistant bits handle the heavy pressure needed to penetrate hardened steel

2 products

Carbide Drill Bits for Carbon Fiber, Fiberglass, and Graphite

Drill abrasive materials cleanly

1 product

Precise-Cut High-Speed Steel Drill Bits

Produce holes so precise that you don’t need to finish them with a reamer

1 product

Coolant-Fed Carbide Drill Bits

The hardest and most wear-resistant bits deliver coolant to reduce heat and evacuate chips

2 products

Carbide-Tipped Drill Bits for Hardened Steel

Straight flutes withstand the heavy pressure needed to penetrate hardened steel

1 product

Smooth-Finish Carbide Drill Bits

More cutting edges for a consistent finish

1 product

Short-Flute Cobalt Steel Drill Bits

Combine the toughness and wear resistance of cobalt with short flutes for rigidity

1 product

Left-Hand High-Speed Steel Drill Bits

Remove stripped screws with flutes that spiral in reverse from other bits

2 products

Hole-Starting Carbide Drill Bits

Harder and last longer than cobalt steel, bits create an accurate starting place in your workpiece

1 product

Chip-Clearing Cobalt Steel Drill Bits

Avoid clogs and dissipate heat with bits that last at least twice as long as high-speed steel

2 products

Short-Flute Carbide-Tipped Drill Bits

Our strongest short-flute bits stay sharp when drilling abrasive materials, such as titanium

2 products

Chip-Clearing High-Speed Steel Drill Bits for Aluminum, Brass, and Bronze

Wide flutes clear chips from soft metals that can gum up other drill bits

1 product

Other Products

Drill Taps

Drill and thread holes with the same bit

1 product

Taps

Cut internal threads for fasteners, pipe, conduit, and more

1 product

Drill Bit Size Gauges

Match your drill bit to one of the holes to confirm its size

1 product

Drill Bit Guides

Drill precise holes without building a fixture

1 product

Threaded Inserts

Create new threads or repair stripped threads

4 products

Drill Stops

Limit how far bits can drill to create identical hole depths every time

1 product

Steel

Strong, machinable, and weldable—all with material certificates for traceability

3 products

Drill Bit Extensions

Expand the reach of drill bits to get into deep and hard-to-reach spots

2 products

Drill Bushings

Fit in holes to guide drill bits and other cutting tools for precise and repeatable holes and cuts

2 products