We will reply to your message within an hour.
More
These jobbers'-length bits have the rigidity and length required for most applications.
Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.
The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.
Also known as mechanics' bits, these are shorter and more rigid than jobbers’ bits but longer than short‐length bits.
Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Also known as double-margin drill bits.
The short flutes on these jobbers'-length bits provide increased rigidity for drilling straighter holes.
Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.
The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.
Three cutting edges instead of the typical two enable these bits to drill holes with a smoother finish than other bits.
Holes in these bits allow coolant to be run through the tool for more efficient chip evacuation. Use them in CNC machines with coolant-through technology.
Drill long, straight holes with these bits. Channels in the bit allows coolant to flow through the tool for more efficient chip evacuation. Also known as gun drills.
Use these bits for general purpose drilling in most material.
With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.
Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks.
In addition to resisting heat and wear better than high-speed steel drill bits, these can also run up to 25% faster and have a longer tool life. Insert them into power screwdrivers, impact drivers, and other tools that accept hex shanks.
The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.
These bits have a round or hex shank that fits into the three-jaw chuck on a hammer drill.
Also known as A-taper bits, these fit rotary hammers with a taper-shank chuck.
A more controlled chip removal reduces heat buildup. Use these bits on brittle material such as block and brick.
Multiple outlining teeth bore clean, flat-bottom holes without chipping or splintering your surface—even when cutting across the grain. Also known as multispur bits.
Bore clean, flat bottom holes in soft wood, veneer, and laminates.
Three sharp points allow these bits to drill accurate straight and overlapping holes, even across the grain. Also known as brad-point bits.
Also known as spade bits, these have a centering point and two cutting edges for boring holes in hard and soft wood.
These bits are cut to match a wood screw’s thread and diameter, resulting in a perfect fit for a screw. They produce clean edges when cutting soft and hard wood.
Harder, stronger, and more wear resistant than carbide-tipped steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.
Carbide-tipped bits maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.
The sharp point allows for gradual penetration to reduce friction and eliminate cracking and chipping when drilling in plastic.
Cobalt steel bits are heat resistant and maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.
Harder, stronger, and more wear resistant than cobalt steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.
The spear-shaped point drills smoothly through glass and ceramic.
These hollow bits are diamond-tipped for long life and fast cutting speeds. Only for use in drill presses.
Harder, stronger, and more wear resistant than high-speed steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.
Because softer metal, like aluminum, brass, and bronze, can clog a bit, the flutes on these bits lift chips out of the hole. Also known as slow-spiral drill bits.
Multiple cutting edges on the tip allow these bits to drill quickly through natural stone, granite, and other hard, abrasive material.
These bits have razor-sharp cutting edges for making clean holes in fibrous material.
Use for drilling in most metal.
Three drill points allow these bits to separate spot-welded panels without damaging the bottom panel.
Store and organize drill bits so they stay in good working condition and don't go missing.
Attach to the shank of a drill bit to extend its reach.
For general purpose use.
Carbide is harder, stronger, and more wear resistant than cobalt steel and high-speed steel for better performance on hard and abrasive materials.
For applications where the workpiece will go through several machining processes, these countersinks bevel the outer edges of the hole and provide an additional 120° chamfer to prevent damage to the center hole.
These countersinks create a surface that minimizes contact between the material and the lathe centers to prevent damage and allow for more precise machining.
Use in general purpose applications.
For excellent performance on hard and abrasive materials, these carbide countersinks are harder, stronger, and more wear resistant than cobalt steel and high-speed steel countersinks.
Use on plastic and most metals.
For use on wood and plastic.
These counterbores are attached to a drill bit for drilling and counterboring in a single step.
For jobbers’ and brad-point drill bits.
Enlarge existing holes without changing the depth.
Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes.
With a drill bit point to drive into the workpiece, these taps can drill and tap holes in a single step. A 1/4" hex shank connects them directly to tools such as drills and power screwdrivers.
Insert these taps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank.
Drill holes and cut threads without switching tools.
These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits.
Place on your workpiece.
Drill precise holes without building a fixture. Clamp the jig onto your material and lift and turn the turret to select the hole size you need.