Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

These jobbers'-length bits have the rigidity and length required for most applications.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

These jobbers'-length bits have the rigidity and length required for most applications.

Three cutting edges instead of the typical two enable these bits to drill holes with a smoother finish than other bits.

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

All have a 1/4"-28 threaded shank which installs directly into the threaded spindle on a compatible drill.

Harder, stronger, and more wear resistant than carbide-tipped steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

These jobbers'-length bits have the rigidity and length required for most applications.

Cobalt steel bits are heat resistant and maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.

Because softer metal, like aluminum, brass, and bronze, can clog a bit, the flutes on these bits lift chips out of the hole. Also known as slow-spiral drill bits.

These bits have short flutes and a sturdy construction which prevent snagging that deforms sheet metal and thin-wall tubing.

Insert directly into power screwdrivers, impact drivers, and other tools that accept a 1/4" hex shank.

Attach to the shank of a drill bit to extend its reach.

For general purpose use.

These countersinks create a surface that minimizes contact between the material and the lathe centers to prevent damage and allow for more precise machining.

These countersinks come attached to a high-speed steel jobbers’ bit.

For use on wood and plastic.

Place on your workpiece.