With flutes that lift chips out of the hole, you don't have to stop drilling to clear these bits manually. They improve coolant flow to dissipate heat and prevent clogs that can damage the bit and ruin the hole. High-speed steel is good for general purpose drilling in most metals.

You only need one tool to turn these taps and install screws. The _1/4" hex shank fits hand or powered screwdrivers for threading holes. Then switch to a screwdriver bit to finish the job. To tap in hard-to-reach spots, add a bit extension. Taps have straight flutes that are good for most jobs.

With flutes that spiral in the opposite direction of other bits, these are primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits. High-speed steel is the versatile choice for drilling most metals.

Convert your socket into a flex socket to access fasteners from an angle. Also known as universal joints.