These jobbers'-length bits have the rigidity and length required for most applications.

These jobbers'-length bits have the rigidity and length required for most applications.

The short flutes on these jobbers'-length bits provide increased rigidity for drilling straighter holes.

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

Harder, stronger, and more wear resistant than cobalt steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

When one end becomes worn, reverse the bit to use the other end.

For general purpose use.

For applications where the workpiece will go through several machining processes, these countersinks bevel the outer edges of the hole and provide an additional 120° chamfer to prevent damage to the center hole.

Remove screws in hard-to-reach places. A spring-loaded sleeve guides bits onto the screw head and keeps them from slipping out.

Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.