Compare material, finish, length class, and decimal size equivalents.
About Masonry Drill Bits
More
Extended-Length Drill Bits
Access hard-to-reach spots and drill deep holes.
Black-oxide drill bits produce less friction than uncoated drill bits.
Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated and black-oxide drill bits.
For technical drawings and 3-D models, click on a part number.
Shank | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Drill Bit Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | For Use On | Each | |
Inch | |||||||||
Black-Oxide High-Speed Steel | |||||||||
19/64" | 0.2969" | 6 3/8" | 3.55" | Round | 19/64" | Standard | Steel, Iron, Stainless Steel | 000000000 | 000000 |
| 5/16" | 0.3125" | 6 3/8" | 3.53" | Round | 5/16" | Standard | Steel, Iron, Stainless Steel | 000000000 | 00000 |
Titanium-Nitride (TiN) Coated High-Speed Steel | |||||||||
| 19/64" | 0.2969" | 6 3/8" | 4" | Round | 19/64" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 000000000 | 00000 |
| 5/16" | 0.3125" | 6 3/8" | 4" | Round | 5/16" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 000000000 | 00000 |
Uncoated High-Speed Steel | |||||||||
| 5/16" | 0.3125" | 6 3/8" | 4" | Round | 5/16" | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 0000000 | 00000 |
Letter | |||||||||
Black-Oxide High-Speed Steel | |||||||||
| L | 0.29" | 6 3/8" | 3.56" | Round | 0.29" | Standard | Steel, Iron, Stainless Steel | 0000000 | 00000 |
| M | 0.295" | 6 3/8" | 3.55" | Round | 0.295" | Standard | Steel, Iron, Stainless Steel | 0000000 | 00000 |
| N | 0.302" | 6 3/8" | 3.54" | Round | 0.302" | Standard | Steel, Iron, Stainless Steel | 0000000 | 00000 |
Extended-Length Cobalt Steel Drill Bits
Access hard-to-reach spots and drill deep holes. With better heat and wear resistance than high-speed steel, these cobalt steel bits can run up to 25% faster and have a longer tool life. The split point keeps the bit centered without a pilot hole.
For technical drawings and 3-D models, click on a part number.
Shank | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Drill Bit Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | For Use On | Each | |
Inch | |||||||||
Uncoated Cobalt Steel | |||||||||
| 5/16" | 0.3125" | 6 3/8" | 3.37" | Round | 5/16" | Split | Steel, Hardened Steel, Iron, Stainless Steel, Nickel | 00000000 | 000000 |
Extended-Length Carbide-Tipped Drill Bits
Access hard-to-reach spots and drill deep holes. More wear resistant than cobalt steel and high-speed steel, these carbide-tipped bits maintain a sharper, harder edge at high temperatures for excellent performance on abrasive material, such as plastic. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill.
For technical drawings and 3-D models, click on a part number.
Shank | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Drill Bit Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | For Use On | Each | |
Inch | |||||||||
Uncoated Carbide-Tipped Steel | |||||||||
| 5/16" | 0.3125" | 6 3/8" | 3.38" | Round | 5/16" | Standard | Steel, Iron, Titanium, Aluminum, Brass, Bronze, Plastic | 00000000 | 000000 |
High-Speed Steel Morse Taper-Shank Drill Bits
Install the Morse taper shank directly into the tapered spindle on machines such as drill presses and lathes.
For technical drawings and 3-D models, click on a part number.
Morse Taper | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Drill Bit Size | Decimal Size Equivalent | No. | Dia. | Overall Lg. | Max. Drilling Dp. | Shank Type | Point Style | For Use On | Each | |
Inch | ||||||||||
Black-Oxide High-Speed Steel | ||||||||||
| 5/16" | 0.3125" | 1 | 0.475" | 6 3/8" | 2.65" | Morse Taper | Standard | Steel, Iron, Stainless Steel | 00000000 | 000000 |
Cobalt Steel Morse Taper-Shank Drill Bits
With better heat and wear resistance than high-speed steel, these cobalt steel bits can run up to 25% faster and have a longer tool life. Install the Morse taper shank directly into the tapered spindle on machines such as drill presses and lathes. A split point keeps the bit centered without a pilot hole.
For technical drawings and 3-D models, click on a part number.
Morse Taper | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Drill Bit Size | Decimal Size Equivalent | No. | Dia. | Overall Lg. | Max. Drilling Dp. | Shank Type | Point Style | For Use On | Each | |
Inch | ||||||||||
Uncoated Cobalt Steel | ||||||||||
| 5/16" | 0.3125" | 1 | 0.475" | 6 3/8" | 3.13" | Morse Taper | Split | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel | 0000000 | 000000 |
SDS-Plus-Shank Masonry Drill Bits for Rotary Hammers
The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers. These bits cannot be used with SDS-Max-drive rotary hammers. Drill holes using simultaneous rotary and hammering action to break masonry material into tiny granules. This type of bit drills faster and penetrates material with less pressure than rotary-only bits. Also called percussion or impact bits.
For technical drawings and 3-D models, click on a part number.
Drill Bits for Wood Screws
These bits are cut to match a wood screw’s thread and diameter, resulting in a perfect fit for a screw. They produce clean edges when cutting soft and hard wood.
For technical drawings and 3-D models, click on a part number.
Shank | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Screw Size | Drill Bit Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Each | |
Inch | |||||||||
Uncoated High-Speed Steel | |||||||||
| No. 18, No. 20 | 5/16" | 0.3125" | 6 3/8" | 4" | Round | 5/16" | Standard | 00000000 | 000000 |
Replaceable Carbide-Insert Drill Bits
Use these bits to drill a large number of holes with high precision. When the cutting edges dull, replace the carbide inserts (sold separately) instead of the entire bit. Each drill bit requires two inserts—one on the inner cutting edge and one on the outer cutting edge. Bits can be used in CNC machines with coolant-through technology; holes in the bit allow coolant to be channeled through the tool for more efficient chip evacuation.
For technical drawings and 3-D models, click on a part number.
Drill Bits | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Insert Inscribed Circle Dia. (IC) | Shank | Replacement Screws | |||||||||||
| Drill Bit Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Inner | Outer | For Use On | Type | Size | Cutting Edge Angle | Each | Each | ||
Steel | |||||||||||||
| 11/16" | 0.687" | 6 3/8" | 3.44" | 0.224" | 0.236" | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Titanium, Aluminum, Brass, Bronze, Fiberglass, Plastic | Round | 1" | 88° | 0000000 | 0000000 | 0000000 | 00000 |
| For Drill Bit Size | Inscribed Circle Dia. (IC) | Thick. | Hole Dia. | Tip Radius | For Use On | Features | Each | |
Titanium-Aluminum-Nitride (TiAlN) Coated Carbide | ||||||||
|---|---|---|---|---|---|---|---|---|
| 11/16", 3/4" | 0.224" | 3/32" | 1/8" | 1/64" | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Titanium, Aluminum, Brass, Bronze, Fiberglass, Plastic | Chip Breakers | 0000000 | 000000 |
| For Drill Bit Size | Inscribed Circle Dia. (IC) | Thick. | Hole Dia. | Tip Radius | For Use On | Features | Each | |
Titanium-Nitride (TiN) Coated Carbide | ||||||||
|---|---|---|---|---|---|---|---|---|
| 11/16", 3/4" | 0.236" | 3/32" | 1/8" | 1/32" | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Titanium, Aluminum, Brass, Bronze, Plastic | Chip Breakers | 0000000 | 000000 |
Impact Flex Socket Adapters
Convert your impact socket into a flex socket to access fasteners from an angle. Also known as universal joints. These adapters are sturdy, so they’ll withstand the high torque and force of impact tools.
Adapters with 50° access angle have two pivot points to reach fasteners at an angle twice as steep as standard adapters.
Adapters that list a compatible retaining ring ID require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.
For technical drawings and 3-D models, click on a part number.
