Tap and Drill Bit Sets
Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
Carbon steel taps are for thread repair and occasional tapping.
High-speed steel taps and drill bits have a longer tool life than carbon steel. Uncoated high-speed steel taps and drill bits are strong enough for most jobs but don’t last as long as other high-speed steel taps and drill bits. Use them for small-scale jobs.
Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
Bottoming-chamfer taps cut into the workpiece with just 1-2 chamfered threads. This short chamfer lets them thread holes closer to the bottom than other taps, but they require more torque to start threads.
No. of Pieces | Chamfer Type | Tap Sizes Included | No. of Flutes | Drill Bit Sizes Included | Drill Bit Material | Container Type | Includes | Each | |
Uncoated Carbon Steel Taps | |||||||||
---|---|---|---|---|---|---|---|---|---|
29 | Taper, Plug, Bottoming | 3 each of sizes: M3 × 0.50 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm | 3, 4 | 2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm 10.2 mm | Black Oxide High-Speed Steel | Metal Case | Tap Wrench | 0000000 | 0000000 |
Uncoated High-Speed Steel Taps | |||||||||
29 | Taper, Plug, Bottoming | 3 each of sizes: M3 × 0.50 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm | 3, 4 | 2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm 10.2 mm | Black Oxide High-Speed Steel | Metal Case | Tap Wrench | 0000000 | 000000 |