Filter by
Sold As
Shank Type
Flute Type
Overall Length
Number of Flutes
For Hole Type
Maximum Tapping Depth
Number of Pieces
Hex Shank Size
Application
Export Control Classification Number (ECCN)
DFARS Specialty Metals
REACH
RoHS
Thread Length
Material
Chamfer Type
Hex Shank Drill Tap Sets for Drills and Screwdrivers
 |
Fabric Pouch |
Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. Connect them directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank. They're made of high-speed steel and are for use on most metal and plastic. Their spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. Recommended for use in through holes, all have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.
Titanium Nitride (TiN)-Coated High-Speed Steel—Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.
No. of Pieces | Chamfer Type | Tap Sizes Included | No. of Flutes | Drill Bit Sizes Included | Container Type | Includes | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Uncoated High-Speed Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7 | Plug | 6-32 8-32 10-24 1/4"-20 5/16"-18 3/8"-16 | 2 | 5/16" 36 ga. 29 ga. 25 ga. 7 ga. F | Fabric Pouch | Chuck | 0000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Titanium Nitride (TiN)-Coated High-Speed Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7 | Plug | 6-32 8-32 10-24 1/4"-20 5/16"-18 3/8"-16 | 2 | 5/16" 36 ga. 29 ga. 25 ga. 7 ga. F | Fabric Pouch | Chuck | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Hex Shank Drill Taps for Drills and Screwdrivers
 |
With a drill bit point to drive into the workpiece, these taps can drill and tap holes in a single step. A 1/4" hex shank connects them directly to tools such as drills and power screwdrivers. They're made of high-speed steel and are for use on most metal and plastic.
Their spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. All have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.
Uncoated High-Speed Steel—Uncoated taps are strong enough for most tapping jobs but have the shortest tool life.
Titanium Nitride (TiN)-Coated High-Speed Steel—Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.
Thread | Drill Bit | Plug Chamfer | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Lg. | Overall Lg. | Size, mm | Decimal Size Equiv. | Point Angle | Flute Type | No. of Flutes | Thread Type | Pitch Dia. Limit | Hex Shank Size | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Uncoated High-Speed Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/16"-18 | 15/16" | 3 23/32" | H | 0.266" | 118° | Spiral | 2 | UNC | H3 | 1/4" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/16"-24 | 15/16" | 3 23/32" | I | 0.272" | 118° | Spiral | 2 | UNF | H3 | 1/4" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M7 × 1 mm | 15/16" | 3 23/32" | 6 | 0.2362" | 118° | Spiral | 2 | Metric | D5 | 1/4" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M8 × 1.25 mm | 15/16" | 3 23/32" | 6.7 | 0.2637" | 118° | Spiral | 2 | Metric | D5 | 1/4" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Titanium Nitride (TiN)-Coated High-Speed Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/16"-18 | 15/16" | 3 23/32" | H | 0.266" | 118° | Spiral | 2 | UNC | H3 | 1/4" | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/16"-24 | 15/16" | 3 23/32" | I | 0.272" | 118° | Spiral | 2 | UNF | H3 | 1/4" | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M8 × 1.25 mm | 15/16" | 3 23/32" | 6.7 | 0.2637" | 118° | Spiral | 2 | Metric | D5 | 1/4" | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
