32mm Long Drill Bits | McMaster-Carr

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type		Each
Jobbers' Length







				Uncoated

				0.65	0.0256"	32	9.7	Round	0.65 mm	Standard	0000000	00000


				0.70	0.0276"	32	9.7	Round	0.7 mm	Standard	0000000	0000


				Short Length







								Black Oxide

								1.4	0.0551"	32	3.5	Round	1.4 mm	Standard	00000000	0000


								1.5	0.0591"	32	5.9	Round	1.5 mm	Standard	00000000	0000




										Uncoated

										1.5	0.0591"	32	8.9	Round	1.5 mm	Standard	0000000	0000

Carbide Drill Bits

Jobbers' Length

Round Shank

The hardest and most wear-resistant drill bits you can buy. Carbide bits stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. They last 10 to 20 times longer than their closest alternative, cobalt steel. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Excellent for a range of materials but won't last as long as coated bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type		Each
Jobbers' Length







				Uncoated

				0.90	0.0354"	32	11	Round	0.9 mm	Four Facet	0000000	000000


				0.95	0.0374"	32	11	Round	0.95 mm	Four Facet	0000000	00000

Cobalt Steel Drill Bits

Short Length

Round Shank

Standard

Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.

Short Length—The most rigid bits for drilling the straightest holes.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type		Each
Short Length







				Uncoated

				1.5	0.0591"	32	6.1	Round	1.5 mm	Standard	00000000	00000