11.1mm Shank Size Drill Bits

Drill multiple hole sizes using only one bit. These have steps with progressively larger diameters—the deeper they drill, the bigger the hole. Count the steps as you drill to achieve the proper size. These bits also deburr as they cut, so they're good for thin materials like sheet metal and plastic panels. Wear and heat resistant, high-speed steel is versatile for use on a range of materials.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

			Shank
Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Type	Size	Drill Bit Point Type		Each





			Uncoated

			5.0, 7.5, 10.0, 13.0, 16.0, 19.0, 21.0, 23.0, 26.0, 29.0, 31.0, 33.0, 35.0	0.1968", 0.2953", 0.3937", 0.5118", 0.6299", 0.748", 0.8268", 0.9055", 1.0236", 1.1417", 1.2205", 1.2992", 1.378"	79	Hex	11.1 mm	Standard	89275A15	000000

Chip-Clearing Cobalt Steel Drill Bits

Jobbers' Length

Parabolic Flute

Round Shank

Split

Avoid clogs and dissipate heat with cobalt bits that last at least twice as long as high-speed steel. The flutes clear chips to improve coolant flow and prevent damage to the bit and the hole. They also speed up drilling since you don't have to stop to clear the bit manually.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type		Each
Jobbers' Length





				Uncoated

				11.1	0.437"	142	94	Parabolic	Round	11.1	Split	2771N799	000000