2.8mm Shank Size Drill Bits

Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Black Oxide

				2.8	0.1102"	61	27.4	Round	2.8 mm	Standard	Dormer Pramet	2958A58	00000




						Gold Oxide

						2.8	0.1102"	67	37.3	Round	2.8 mm	Split	Viking Norseman Drill	30565A247	0000


						Short Length







										Black Oxide

										2.8	0.1102"	46	7	Round	2.8 mm	Standard	Dormer Pramet	28255A83	0000


										Extended Length







														Black Oxide

														2.8	0.1102"	100	66	Round	2.8 mm	Standard	Dormer Pramet	88455A117	0000

Cobalt Steel Drill Bits


Jobbers' Length Round Shank	Split

Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron, titanium, and fiberglass.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Titanium Nitride (TiN) Coated

				2.8	0.1102"	61	33	Round	2.8 mm	Split	Chicago-Latrobe	5058N25	00000




						Titanium Aluminum Nitride (TiAlN) Coated

						2.8	0.1102"	61	33	Round	2.8 mm	Split	Chicago-Latrobe	2753A227	00000




								Gold Oxide

								2.8	0.1102"	61	27.4	Round	2.8 mm	Split	Dormer Pramet	29355A48	0000

Chip-Clearing Cobalt Steel Drill Bits


Jobbers' Length Parabolic Flute Round Shank	Split

Avoid clogs and dissipate heat with cobalt bits that last at least twice as long as high-speed steel. The flutes clear chips to improve coolant flow and prevent damage to the bit and the hole. They also speed up drilling since you don't have to stop to clear the bit manually.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				2.8	0.1102"	61	31	Parabolic	Round	2.8	Split	Viking Norseman Drill	2771N731	00000