McMaster-Carr logo
    Filter by
    System of Measurement
    For Hole Type
    Thread Type
    Industrial Info Compare
    Number of Flutes
    Component
    Chamfer Type
    Number of Pieces
    Pitch Diameter Limit
    Attribute Image
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Number of Drill Bits
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    19 Products

    Tap and Drill Bit Sets

    Image of Product. Front orientation. Tap and Drill Bit Sets. Tap and Drill Bit Sets, Plastic Case.

    Plastic Case

    Image of Product. Front orientation. Tap and Drill Bit Sets. Tap and Drill Bit Sets, Metal Case.

    Metal Case

    Image of Product. Front orientation. Tap and Drill Bit Sets. Tap and Drill Bit Sets, Plastic Pouch.

    Plastic Pouch

    Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
    Uncoated Carbon Steel Tap—Uncoated carbon steel taps are for thread repair and occasional tapping.
    Uncoated High-Speed Steel Tap—Uncoated high-speed steel taps have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel taps. Use them for small-scale jobs.
    Uncoated Cobalt Steel Tap—Uncoated cobalt steel taps have higher strength and wear resistance than carbon steel and high-speed steel taps.
    Black-Oxide High-Speed Steel Tap—Black-oxide high-speed steel taps have a longer tool life than carbon steel. They cut with less friction than uncoated taps.
    Titanium Nitride (TiN)-Coated High-Speed Steel Tap—Titanium nitride (TiN)-coated high-speed steel taps have a longer tool life than carbon steel. They resist heat and wear better than uncoated taps, letting them last up to twice as long.
    Taper Chamfer—Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
    Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    Bottoming Chamfer—Bottoming-chamfer taps cut into the workpiece with just 1-2 chamfered threads. This short chamfer lets them thread holes closer to the bottom than other taps, but they require more torque to start threads.
    Black-Oxide High-Speed Steel Drill Bit—Black-oxide high-speed steel drill bits have a longer tool life than carbon steel. They cut with less friction than uncoated drill bits.
    Gold-Oxide High-Speed Steel Drill Bit—Gold-oxide high-speed steel drill bits have a longer tool life than carbon steel.
    Titanium Nitride (TiN)-Coated High-Speed Steel Drill Bit—Titanium nitride (TiN)-coated high-speed steel drill bits have a longer tool life than carbon steel. They last longer and can drill at higher speeds than uncoated and oxide-coated drill bits.
    Uncoated Cobalt Steel Drill Bit—Uncoated cobalt steel drill bits have higher strength and wear resistance than carbon steel and high-speed steel drill bits.
    Uncoated High-Speed Steel Drill Bit—Uncoated high-speed steel drill bits have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel drill bits. Use them for small-scale jobs.
    No. of
    Pieces
    Chamfer Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Includes
    Each
    Uncoated Carbon Steel Tap
    13Plug1 each of sizes:
    4-40
    6-32
    8-32
    10-24
    10-32
    1/4"-20    		2"
    2 1/8"
    2 9/32"
    2 9/16"
    2 39/64"    		UNC, UNF
    		3, 4H343 ga.
    35 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.    		Black-Oxide High-Speed SteelPlastic CaseTap Wrench0000000000000
    29Taper, Plug, Bottoming3 each of sizes:
    M3 × 0.50 mm
    M4 × 0.70 mm
    M5 × 0.80 mm
    M6 × 1.00 mm
    M8 × 1.25 mm
    M10 × 1.50 mm
    M12 × 1.75 mm    		1 39/64"
    1 27/32"
    2 1/64"
    2 3/32"
    2 13/64"
    2 3/4"
    2 61/64"    		Metric
    		3, 4H6
    2.5 mm
    3.3 mm
    4.2 mm
    5.0 mm
    6.8 mm
    8.5 mm
    10.2 mm    		Black-Oxide High-Speed SteelMetal CaseTap Wrench0000000000000
     
    Uncoated High-Speed Steel Tap
    10Plug1 each of sizes:
    1/4"-20
     5/16"-18
    3/8"-16
    7/16"-14
    1/2"-13    		2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC
    		4Not Rated27/64"
    5/16"
    7 ga.
    F
    U    		Black-Oxide High-Speed SteelPlastic Pouch—0000000000000
    16Plug1 each of sizes:
    M3 × 0.50 mm
    M3.5 × 0.60 mm
    M4 × 0.70 mm
    M5 × 0.80 mm
    M6 × 1.00 mm
    M8 × 1.25 mm
    M10 × 1.50 mm
    M12 × 1.75 mm    		1 15/16"
    2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 3/4"
    2 15/16"
    3 3/8"    		Metric
    		3, 4D3, D4, D5, D62.5 mm
    2.9 mm
    3.3 mm
    4.2 mm
    5.0 mm
    6.75 mm
    8.5 mm
    10.25 mm    		Black-Oxide High-Speed SteelPlastic Pouch—0000000000000
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Uncoated High-Speed SteelMetal Case—0000000000000
    18Plug1 each of sizes:
    6-40
    8-36
    10-24
    10-32
    1/4-28
    5/16-24
    3/8-24
    7/16-20
    1/2-20    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H2, H329/64"
    25/64"
    33 ga.
    29 ga.
    25 ga.
    21 ga.
    3 ga.
    I
    Q    		Uncoated High-Speed SteelMetal Case—0000000000000
    18Plug1 each of sizes:
    M2.5 × 0.45 mm
    M3 × 0.50 mm
    M3.5 × 0.60 mm
    M4 × 0.70 mm
    M5 × 0.80 mm
    M6 × 1.00 mm
    M8 × 1.25 mm
    M10 × 1.50 mm
    M12 × 1.75 mm    		1 3/4"
    1 15/16"
    2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 3/8"    		Metric
    		3, 4D3, D4, D5, D62.05 mm
    2.5 mm
    2.9 mm
    3.3 mm
    4.2 mm
    5.0 mm
    6.7 mm
    8.5 mm
    10.2 mm    		Uncoated High-Speed SteelMetal Case—00000000000000
    29Taper, Plug, Bottoming3 each of sizes:
    M3 × 0.50 mm
    M4 × 0.70 mm
    M5 × 0.80 mm
    M6 × 1.00 mm
    M8 × 1.25 mm
    M10 × 1.50 mm
    M12 × 1.75 mm    		1 39/64"
    1 27/32"
    2 1/64"
    2 3/32"
    2 13/64"
    2 3/4"
    2 61/64"    		Metric
    		3, 4H6
    2.5 mm
    3.3 mm
    4.2 mm
    5.0 mm
    6.8 mm
    8.5 mm
    10.2 mm    		Black-Oxide High-Speed SteelMetal CaseTap Wrench0000000000000
     
    Uncoated Cobalt Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		2, 3H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Uncoated Cobalt SteelMetal Case—0000000000000
     
    Black-Oxide High-Speed Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Black-Oxide High-Speed Steel, Gold-Oxide High-Speed SteelMetal Case—00000000000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Titanium Nitride (TiN)-Coated High-Speed SteelMetal Case—00000000000000
     

    Quick-Change Hex Shank Drill Tap Sets for Drills and Screwdrivers

    Image of Product. Front orientation. Drill Taps. Quick-Change Hex Shank Drill Tap Sets for Drills and Screwdrivers, Fabric Pouch.

    Fabric Pouch

    Image of Product. Front orientation. Drill Taps. Quick-Change Hex Shank Drill Tap Sets for Drills and Screwdrivers, Plastic Case.

    Plastic Case

    Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. They also save you time when changing from tool to tool. The grooved shank snaps directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank. However, they’re not rated for impact drivers. They’re made of high-speed steel and are for use on most metal and plastic.
    Their spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. Recommended for use in through holes, all have a plug chamfer with 3-5 chamfered cutting threads, so they’re suitable for start-to-finish tapping.
    Titanium Nitride (TiN)-Coated High-Speed Steel—Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes Included
    No. of
    Flutes
    Drill Bit Sizes Included
    Container
    Type
    Includes
    Each
    Uncoated High-Speed Steel
    7Plug6-32
    8-32
    10-24
    1/4"-20
    5/16"-18
    3/8"-16    		25/16"
    36 ga.
    29 ga.
    25 ga.
    7 ga.
    F    		Fabric PouchChuck00000000000000
    7PlugM3 × 0.5 mm
    M4 × 0.7 mm
    M5 × 0.8 mm
    M6 × 1.0 mm
    M8 × 1.25 mm
    M10 × 1.5 mm    		23/32"
    1/8"
    11/64"
    13/64"
    17/64"
    31/64"    		Plastic CaseChuck0000000000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel
    7Plug6-32
    8-32
    10-24
    1/4"-20
    5/16"-18
    3/8"-16    		25/16"
    36 ga.
    29 ga.
    25 ga.
    7 ga.
    F    		Fabric PouchChuck0000000000000
     

    Hex-Shank Tap and Drill Bit Sets for Drills and Powered Screwdrivers

    Image of Product. Front orientation. Tap and Drill Bit Sets. Hex-Shank Tap and Drill Bit Sets for Drills and Powered Screwdrivers.
    All taps and drill bits have a hex shank for direct connection to tools such as drills and power screwdrivers. They're made of high-speed steel and are for use on most metal and plastic. Taps have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping, but they’ll need space at the bottom of closed-end holes for chips to accumulate.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Includes
    Each
    Uncoated High-Speed Steel Tap
    13PlugM3 × 0.5 mm
    M4 × 0.7 mm
    M5 × 0.8 mm
    M6 × 1.0 mm
    M8 × 1.25 mm
    M10 × 1.5 mm    		1 19/64"
    1 27/64"
    1 35/64"
    1 37/64"    		Metric
    		3, 4
    2.5 mm
    3.3 mm
    4.2 mm
    5.0 mm
    6.8 mm
    8.5 mm    		Uncoated High-Speed SteelPlastic CaseChuck00000000000000
     

    Chip-Clearing Tap and Drill Bit Sets for Through Holes

    Image of Product. Front orientation. Tap and Drill Bit Sets. Chip-Clearing Tap and Drill Bit Sets for Through Holes.
    Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes. Because they don't need to be reversed to prevent buildup, they produce threads more efficiently than standard taps and are suitable for production work. Taps have a square shank for compatibility with tap wrenches and tap holders for drill presses and milling machines. With a plug chamfer, they have 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping. All taps and drill bits are made of high-speed steel for use on most metal and plastic.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Each
    Uncoated High-Speed Steel Tap
    18Plug6-32
    8-32
    10-24
    10-32
    1/4"-20
    5/16"-18
    3/8"-16
    7/16"-14
    1/2"-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		2, 3H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Black-Oxide High-Speed SteelMetal Case000000000000000
     
    Gold-Oxide High-Speed Steel Tap
    18Plug6-40
    8-36
    10-24
    10-32
    1/4"-28
    5/16"-24
    3/8"-24
    7/16"-20
    1/2"-20    		2 1/16"
    2 7/32"
    2 15/32"
    2 5/8"
    2 7/8"
    3 1/8"
    3 5/32"
    3 3/8"    		UNF
    		2, 3H2, H329/64"
    25/64"
    33 ga.
    29 ga.
    25 ga.
    21 ga.
    3 ga.
    I
    Q    		Gold-Oxide High-Speed SteelMetal Case00000000000000
    18PlugM2.5 × 0.45 mm
    M3 × 0.5 mm
    M3.5 × 0.6 mm
    M4 × 0.7 mm
    M5 × 0.8 mm
    M6 × 1.00 mm
    M8 × 1.25 mm
    M10 × 1.5 mm
    M12 × 1.75 mm    		1 13/16"
    1 15/16"
    2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 3/8"    		Metric
    		2, 3D3, D4, D5, D62.05 mm
    2.5 mm
    2.9 mm
    3.3 mm
    4.2 mm
    5 mm
    6.7 mm
    8.5 mm
    10.2 mm    		Gold-Oxide High-Speed SteelMetal Case00000000000000
     

    Hex-Shank Tap and Drill Bit Sets

    Image of Product. Front orientation. Tap and Drill Bit Sets. Hex-Shank Tap and Drill Bit Sets.
    Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
    Uncoated High-Speed Steel Tap—Uncoated high-speed steel taps have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel taps. Use them for small-scale jobs.
    Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    Black-Oxide High-Speed Steel Drill Bit—Black-oxide high-speed steel drill bits have a longer tool life than carbon steel. They cut with less friction than uncoated drill bits.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Each
    Uncoated High-Speed Steel Tap
    36Plug1 each of sizes:
    6-32
    6-40
    8-32
    8-36
    10-24
    10-32
    12-24
    12-28
    1/4"-20
    1/4"-28
    5/16"-18
    5/16"-24
    3/8"-24
    3/8"-16
    7/16"-14
    7/16"-20
    1/2"-13
    1/2"-20    		2"
    2 1/8"
    2 5/32"
    2 11/64"
    2 3/8"
    2 1/2"
    2 15/16"
    3 5/32"
    3 7/32"    		UNC, UNF
    		3, 4H2, H31 each of sizes:
    25/64"
    27/64"
    29/64"
    5/16"
    36 ga.
    33 ga.
    25 ga.
    21 ga.
    16 ga.
    15 ga.
    7 ga.
    3 ga.
    F
    I
    Q
    U
    2 each of sizes:
    29 ga.    		Black-Oxide High-Speed SteelMetal Case00000000000000
     
    back to top