McMaster-Carr logo
    Filter by
    System of Measurement
    For Hole Type
    Number of Pieces
    Chamfer Type
    Number of Drill Bits
    Number of Taps
    Pipe Size
    Industrial Info Snippet
    Number of Flutes
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Industrial Info Compare
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    26 Products

    Tap, Die, and Drill Bit Sets

    Image of Product. Front orientation. Tap, Die, and Drill Bit Sets.
    Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included. The dies are hex shaped for use with conventional wrenches. The taps are made of carbon steel and are recommended for thread repair and occasional tapping.
    Taper Chamfer—Taper chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
    Plug Chamfer—Plug chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    No. of
    Pieces
    Tap Sizes Included
    Die Sizes Included
    Drill Bit Sizes Included
    Container
    Type
    Includes
    Tap Chamfer
    Type
    Each
    Carbon Steel
     
    Right-Hand Thread
    1174-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm5/64", 7/64", 5/32", 1/4", 19/64", 5/16", 21/64", 3/8", 25/64", 13/32", 27/64", 29/64", 43 ga., 39 ga., 36 ga., 30 ga., 29 ga., 25 ga., 21 ga., 20 ga., 16 ga., 9 ga., 7 ga., 3 ga., B, F, H, I, J, O, Q, R, S, U, ZPlastic CaseDie Wrench (2), Extractor (5), Tap Wrench (3), Thread Gauge (2)Taper, Plug000000000000000
     

    Chip-Clearing Tap and Drill Bit Sets for Through Holes

    Image of Product. Front orientation. Tap and Drill Bit Sets. Chip-Clearing Tap and Drill Bit Sets for Through Holes.
    Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes. Because they don't need to be reversed to prevent buildup, they produce threads more efficiently than standard taps and are suitable for production work. Taps have a square shank for compatibility with tap wrenches and tap holders for drill presses and milling machines. With a plug chamfer, they have 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping. All taps and drill bits are made of high-speed steel for use on most metal and plastic.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Each
    Uncoated High-Speed Steel Tap
    18Plug6-32
    8-32
    10-24
    10-32
    1/4"-20
    5/16"-18
    3/8"-16
    7/16"-14
    1/2"-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		2, 3H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Black-Oxide High-Speed SteelMetal Case000000000000000
     
    Gold-Oxide High-Speed Steel Tap
    18Plug6-40
    8-36
    10-24
    10-32
    1/4"-28
    5/16"-24
    3/8"-24
    7/16"-20
    1/2"-20    		2 1/16"
    2 7/32"
    2 15/32"
    2 5/8"
    2 7/8"
    3 1/8"
    3 5/32"
    3 3/8"    		UNF
    		2, 3H2, H329/64"
    25/64"
    33 ga.
    29 ga.
    25 ga.
    21 ga.
    3 ga.
    I
    Q    		Gold-Oxide High-Speed SteelMetal Case00000000000000
     

    Tap and Drill Bit Sets

    Image of Product. Front orientation. Tap and Drill Bit Sets. Tap and Drill Bit Sets, Plastic Case.
    Image of Product. Front orientation. Tap and Drill Bit Sets. Tap and Drill Bit Sets, Metal Case.

    Plastic Case

    Metal Case

    Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
    Uncoated Carbon Steel Tap—Uncoated carbon steel taps are for thread repair and occasional tapping.
    Uncoated High-Speed Steel Tap—Uncoated high-speed steel taps have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel taps. Use them for small-scale jobs.
    Uncoated Cobalt Steel Tap—Uncoated cobalt steel taps have higher strength and wear resistance than carbon steel and high-speed steel taps.
    Black-Oxide High-Speed Steel Tap—Black-oxide high-speed steel taps have a longer tool life than carbon steel. They cut with less friction than uncoated taps.
    Titanium Nitride (TiN)-Coated High-Speed Steel Tap—Titanium nitride (TiN)-coated high-speed steel taps have a longer tool life than carbon steel. They resist heat and wear better than uncoated taps, letting them last up to twice as long.
    Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    Black-Oxide High-Speed Steel Drill Bit—Black-oxide high-speed steel drill bits have a longer tool life than carbon steel. They cut with less friction than uncoated drill bits.
    Gold-Oxide High-Speed Steel Drill Bit—Gold-oxide high-speed steel drill bits have a longer tool life than carbon steel.
    Titanium Nitride (TiN)-Coated High-Speed Steel Drill Bit—Titanium nitride (TiN)-coated high-speed steel drill bits have a longer tool life than carbon steel. They last longer and can drill at higher speeds than uncoated and oxide-coated drill bits.
    Uncoated Cobalt Steel Drill Bit—Uncoated cobalt steel drill bits have higher strength and wear resistance than carbon steel and high-speed steel drill bits.
    Uncoated High-Speed Steel Drill Bit—Uncoated high-speed steel drill bits have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel drill bits. Use them for small-scale jobs.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Includes
    Each
    Uncoated Carbon Steel Tap
    13Plug1 each of sizes:
    4-40
    6-32
    8-32
    10-24
    10-32
    1/4"-20    		2"
    2 1/8"
    2 9/32"
    2 9/16"
    2 39/64"    		UNC, UNF
    		3, 4H343 ga.
    35 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.    		Black-Oxide High-Speed SteelPlastic CaseTap Wrench0000000000000
     
    Uncoated High-Speed Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Uncoated High-Speed SteelMetal Case—0000000000000
    18Plug1 each of sizes:
    6-40
    8-36
    10-24
    10-32
    1/4-28
    5/16-24
    3/8-24
    7/16-20
    1/2-20    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H2, H329/64"
    25/64"
    33 ga.
    29 ga.
    25 ga.
    21 ga.
    3 ga.
    I
    Q    		Uncoated High-Speed SteelMetal Case—0000000000000
     
    Uncoated Cobalt Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		2, 3H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Uncoated Cobalt SteelMetal Case—0000000000000
     
    Black-Oxide High-Speed Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Black-Oxide High-Speed Steel, Gold-Oxide High-Speed SteelMetal Case—00000000000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Titanium Nitride (TiN)-Coated High-Speed SteelMetal Case—00000000000000
     

    Hex-Shank Tap and Drill Bit Sets

    Image of Product. Front orientation. Tap and Drill Bit Sets. Hex-Shank Tap and Drill Bit Sets.
    Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
    Uncoated High-Speed Steel Tap—Uncoated high-speed steel taps have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel taps. Use them for small-scale jobs.
    Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    Black-Oxide High-Speed Steel Drill Bit—Black-oxide high-speed steel drill bits have a longer tool life than carbon steel. They cut with less friction than uncoated drill bits.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Each
    Uncoated High-Speed Steel Tap
    36Plug1 each of sizes:
    6-32
    6-40
    8-32
    8-36
    10-24
    10-32
    12-24
    12-28
    1/4"-20
    1/4"-28
    5/16"-18
    5/16"-24
    3/8"-24
    3/8"-16
    7/16"-14
    7/16"-20
    1/2"-13
    1/2"-20    		2"
    2 1/8"
    2 5/32"
    2 11/64"
    2 3/8"
    2 1/2"
    2 15/16"
    3 5/32"
    3 7/32"    		UNC, UNF
    		3, 4H2, H31 each of sizes:
    25/64"
    27/64"
    29/64"
    5/16"
    36 ga.
    33 ga.
    25 ga.
    21 ga.
    16 ga.
    15 ga.
    7 ga.
    3 ga.
    F
    I
    Q
    U
    2 each of sizes:
    29 ga.    		Black-Oxide High-Speed SteelMetal Case00000000000000
     

    Quick-Change Hex Shank Drill Taps for Drills and Screwdrivers

    Image of Product. Front orientation. Drill Taps. Quick-Change Hex Shank Drill Taps for Drills and Screwdrivers.
    Save time when you need to change drill taps frequently. The grooved shank snaps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank. However, they’re not rated for impact drivers. With a drill bit point to drive into the workpiece, these taps can drill and tap holes in a single step. They’re made of high-speed steel and are for use on most metal and plastic.
    Their spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. All have a plug chamfer with 3-5 chamfered cutting threads, so they’re suitable for start-to-finish tapping.
    Uncoated High-Speed Steel—Uncoated taps are strong enough for most tapping jobs but have the shortest tool life.
    Titanium Nitride (TiN)-Coated High-Speed Steel—Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.
    Thread
    Drill Bit
    Plug Chamfer
    Size
    Lg.
    Overall
    Lg.
    Size
    Decimal Size
    Equiv.
    Point
    Angle
    Flute
    Type
    No. of
    Flutes
    Thread
    Type
    Pitch Dia.
    Limit
    Hex Shank
    Size
    Each
    Uncoated High-Speed Steel
    10-32
    		5/8"3 3/8"21 Ga.
    		0.159"118°Spiral2UNF
    		H31/4"0000000000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel
    10-32
    		5/8"3 3/8"21 Ga.
    		0.159"118°Spiral2UNF
    		H31/4"0000000000000
     

    Countersink Drill Bits for Taps

    Image of Product. Front orientation. ZoomedIn view. Countersink Drill Bits. Countersink Drill Bits for Taps.
    Also called subland drill bits, these bits countersink as they drill to prepare holes for tapping. The 90° countersink angle guides the tap into the hole. The drill bit diameter will not change after sharpening.
    Dia.
    Lg.
    90°
    Countersink Angle
    For Tap Thread
    Size
    Body
    Step
    Step
    Overall
    Shank
    Dia.
    Point
    Angle
    For Use On
    Each
    Uncoated High-Speed Steel
     
    2 Flutes
    10-32
    		0.219"0.159"1/2"3 3/4"0.219"118°Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000
     

    Drill Taps

    Image of Product. Front orientation. Drill Taps. Drill Taps, Spiral Flute.

    Spiral Flute

    Drill holes and cut threads without switching tools. Made of high-speed steel, these taps are for use on most metal and plastic. The square shank is compatible with tap holders for drill presses and milling machines. All have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.
    Uncoated High-Speed Steel—Uncoated taps are strong enough for most tapping jobs but have the shortest tool life.
    Titanium Nitride (TiN)-Coated High-Speed Steel—Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.
    Spiral Flute—Taps with spiral flutes keep chips clear by drawing them back toward the tap and out of the hole.
    Thread
    Drill Bit
    Plug Chamfer
    Size
    Lg.
    Overall
    Lg.
    Size
    Decimal Size
    Equiv.
    Point
    Angle
    Flute
    Type
    No. of
    Flutes
    Thread
    Type
    Pitch Dia.
    Limit
    Each
    Uncoated High-Speed Steel
    10-32
    		5/8"2 3/8"21 Ga.
    		0.159"110°Spiral2UNF
    		H30000000000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel
    10-32
    		5/8"2 3/8"21 Ga.
    		0.159"118°Spiral2UNF
    		H3000000000000
     

    Threaded-Shank Phillips Bits

    Image of Product. Front orientation. Screwdriver Bits. Threaded-Shank Phillips Bits.
    Thread these bits directly onto your driving tool for an extra-stable connection that minimizes wobbling. Phillips bits align easily with fasteners and deliver more torque than slotted bits.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    10-32 Thread Size
    Drive
    Size
    For Screw Size
    Material
    Overall
    Lg.
    Each
    For Hand Tools
     
    Threaded Shank
    No. 1No. 2, No. 3, No. 4
    		Steel1 1/2"000000000000
    No. 2No. 5, No. 6, No. 7, No. 8, No. 9, No. 10
    		Steel1 1/2"00000000000
     

    Thread-Locking Threaded Inserts with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Thread-Locking Threaded Inserts with Installation Tools.
    What you need to add or repair threads quickly in parts under stress or vibration. These inserts come with a closed-end tap, a drill bit, and an installation bit. Also known as E-Z Lok, they have Loctite® adhesive already applied, and the adhesive reaches full strength after 72 hours.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Thin Wall—Use these inserts near the edge of workpieces or wherever you only have space for a small hole. They're also lighter than standard and extra-thick wall inserts for applications with strict weight limits.
    Black Phosphate-Coated Steel—These inserts resist occasional moisture.
    Thread
    Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Drive
    Style
    No. of Inserts
    Included
    Each
    Standard Wall
     
    Black Phosphate-Coated Steel
    10-32
    		3/8"-16
    		0.406"5/16"
    		0.313"Slotted
    		10000000000000000
     
    Thin Wall
     
    Black Phosphate-Coated Steel
    10-32
    		5/16"-18
    		0.312"I
    		0.272"Slotted
    		1000000000000000
     

    Helical Threaded Insert Assortments with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Helical Threaded Insert Assortments with Installation Tools.
    Repair damaged threads or create new ones. These convenient assortments include helical inserts, an installation tool for each thread size, a drill bit, and a tap. The inserts are also known as Heli-Coil inserts.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    No. of Inserts
    Included
    Includes
    Thread
    Spacing
    Drill Bit Size
    For Max. Hole Dia.
    Each
    Pronged
     
    18-8 Stainless Steel
    3610-32 Thread × 0.19" Installed Lg. (12 Each)
    10-32 Thread × 0.285" Installed Lg. (12 Each)
    10-32 Thread × 0.38" Installed Lg. (12 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Fine
    		13/64"
    		0.203"000000000000000
    601/2"-20 Thread × 3/4" Installed Lg. (6 Each)
    1/4"-28 Thread × 3/8" Installed Lg. (12 Each)
    3/8"-24 Thread × 0.562" Installed Lg. (12 Each)
    5/16"-24 Thread × 0.469" Installed Lg. (12 Each)
    7/16"-20 Thread × 0.656" Installed Lg. (6 Each)
    10-32 Thread × 0.285" Installed Lg. (12 Each)
    Drill Bits
    Installation Tools
    Through-Hole Taps    		Fine
    		13/64"
    17/64"
    21/64"
    25/64"
    29/64"
    33/64"
    		0.203"
    0.266"
    0.328"
    0.391"
    0.453"
    0.516"    		000000000000000
     

    Helical Threaded Inserts with Installation Tools

    Image of Product. Drill Bit, Installation Tool and Through-Hole Tap. Front orientation. Threaded Inserts. Helical Threaded Inserts with Installation Tools, Pronged, Drill Bit, Through-Hole Tap, Installation Tool.

    Drill Bit, Installation Tool

    and Through-Hole Tap

    Quickly restore stripped threads—these inserts come with through-hole taps and installation tools.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Inserts
    Included
    Includes
    Each
    Pronged
     
    18-8 Stainless Steel
    10-32
    		0.190"7 Ga.
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		000000000000000
    10-32
    		0.285"7 Ga.
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		00000000000000
    10-32
    		0.380"7 Ga.
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		00000000000000
    10-32
    		0.475"7 Ga.
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		00000000000000
    10-32
    		0.570"7 Ga.
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		00000000000000
     
    back to top