M3 Drill Bits | McMaster-Carr

Clear All

	Thread Type Thread Type

	System of Measurement System of Measurement

Inch

Metric

	Thread Size Thread Size	Show

	Thread Size Thread Size	Hide

	Thread Pitch Thread Pitch

	Number of Drill Bits Number of Drill Bits

	For Use On For Use On

	Component Component

Tap

Drill Bit

Die

	Number of Pieces Number of Pieces

117

	Flute Type Flute Type

	Straight
	Spiral
	Spiral Point

	Chamfer Type Chamfer Type

Plug

Taper

Bottoming

	Drill Bit Material Drill Bit Material

High-Speed Steel

Steel

	Number of Taps Number of Taps

	Shape Shape

	Hex

	Application Application

Through-Hole Threading

Closed-End Hole Threading

	Pipe Size Pipe Size

1/8

	Drill Bit Finish Drill Bit Finish

Uncoated

Black Oxide

Gold Oxide

	Individual/Set Individual/Set

Individual

Set

	Container Type Container Type

Metal Case

Plastic Case

Plastic Pouch

	Shank Type Shank Type


Round	Hex

Square

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	Width Width

5/8"

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Material Material

14 Products

Tap and Drill Bit Sets

Set with Metal Case

Set with Plastic Pouch

Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.

Carbon steel taps are for thread repair and occasional tapping.

High-speed steel taps and drill bits have a longer tool life than carbon steel. Uncoated high-speed steel taps and drill bits are strong enough for most jobs but don’t last as long as other high-speed steel taps and drill bits. Use them for small-scale jobs.

Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.

Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.

Bottoming-chamfer taps cut into the workpiece with just 1-2 chamfered threads. This short chamfer lets them thread holes closer to the bottom than other taps, but they require more torque to start threads.

Uncoated Carbon Steel Taps
No. of Pieces	Chamfer Type	Tap Sizes Included	No. of Flutes	Drill Bit Sizes Included	Drill Bit Material	Container Type	Includes		Each
29	Taper, Plug, Bottoming	3 each of sizes: M3 × 0.50 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm	3, 4	2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm 10.2 mm	Black Oxide High-Speed Steel	Metal Case	Tap Wrench	0000000	0000000
Uncoated High-Speed Steel Taps
16	Plug	1 each of sizes: M3 × 0.50 mm M3.5 × 0.60 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm	3, 4	2.5 mm 2.9 mm 3.3 mm 4.2 mm 5.0 mm 6.75 mm 8.5 mm 10.25 mm	Black Oxide High-Speed Steel	Plastic Pouch	__	0000000	000000
18	Plug	1 each of sizes: M2.5 × 0.45 mm M3 × 0.50 mm M3.5 × 0.60 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm	3, 4	2.05 mm 2.5 mm 2.9 mm 3.3 mm 4.2 mm 5.0 mm 6.7 mm 8.5 mm 10.2 mm	Uncoated High-Speed Steel	Metal Case	__	00000000	000000
29	Taper, Plug, Bottoming	3 each of sizes: M3 × 0.50 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm	3, 4	2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm 10.2 mm	Black Oxide High-Speed Steel	Metal Case	Tap Wrench	0000000	000000

Chip-Clearing Tap and Drill Bit Sets for Through-Holes

Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes. Because they don't need to be reversed to prevent buildup, they produce threads more efficiently than standard taps and are suitable for production work. Taps have a square shank for compatibility with tap wrenches and tap holders for drill presses and milling machines. With a plug chamfer, they have 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping. All taps and drill bits are made of high-speed steel for use on most metal and plastic.

For technical drawings and 3-D models, click on a part number.

Gold Oxide High-Speed Steel
No. of Pieces	Chamfer Type	Tap Sizes Included	Thread Type	No. of Flutes	Pitch Dia. Limit	Drill Bit Sizes Included	Drill Bit Material	Container Type		Each
18	Plug	M2.5 × 0.45 mm M3 × 0.5 mm M3.5 × 0.6 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.5 mm M12 × 1.75 mm	Metric	2, 3	D3, D4, D5, D6	2.05 mm 2.5 mm 2.9 mm 3.3 mm 4.2 mm 5 mm 6.7 mm 8.5 mm 10.2 mm	Gold Oxide High-Speed Steel	Metal Case	00000000	0000000

Hex-Shank Tap and Drill Bit Sets for Drills and Screwdrivers

All taps and drill bits have a hex shank for direct connection to tools such as drills and power screwdrivers. They're made of high-speed steel and are for use on most metal and plastic. Taps have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping, but they’ll need space at the bottom of closed-end holes for chips to accumulate.

Uncoated High-Speed Steel
No. of Pieces	Chamfer Type	Tap Sizes Included	Overall Lg.	No. of Flutes	Drill Bit Sizes Included	Drill Bit Material	Container Type	Includes		Each
13	Plug	M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.0 mm M8 × 1.25 mm M10 × 1.5 mm	1 19/64" 1 27/64" 1 35/64" 1 37/64"	3, 4	2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm	Uncoated High-Speed Steel	Plastic Case	Chuck	0000000	0000000

Hex-Shank Combination Drill Bit/Tap Sets for Drills and Screwdrivers

Set with Plastic Case

Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. Connect them directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank. They're made of high-speed steel and are for use on most metal and plastic. Their spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. Recommended for use in through holes, all have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.

For technical drawings and 3-D models, click on a part number.

Uncoated High-Speed Steel
No. of Pieces	Chamfer Type	Tap Sizes Included	No. of Flutes	Drill Bit Sizes Included	Container Type	Includes		Each
7	Plug	M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.0 mm M8 × 1.25 mm M10 × 1.5 mm	2	3/32" 1/8" 11/64" 13/64" 17/64" 31/64"	Plastic Case	Chuck	0000000	0000000

Hex-Shank Tap Sets for Drills and Screwdrivers

Multiple tap sizes allow tapping a range of hole diameters. The taps in these sets connect directly to the included screwdriver and other tools that accept a 1/4" hex shank, such as drills and power screwdrivers. They're made of high-speed steel and are for use on most metal and plastic. With a plug chamfer, they're good for start-to-finish tapping, but they'll require space at the bottom of closed-end holes for chips to accumulate.

For technical drawings and 3-D models, click on a part number.

Uncoated High-Speed Steel
No. of Pieces	Chamfer Type	Tap Sizes Included	No. of Flutes	Hex Shank Size	Includes		Each
8	Plug	M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.0 mm M8 × 1.25 mm M10 × 1.5 mm	4	1/4"	1/4" Hex Shank Extension, 1/4" Bit Screwdriver	0000000	0000000

Tap, Die, and Drill Bit Sets

Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included. The dies are hex shaped for use with conventional wrenches. The taps are made of carbon steel and are recommended for thread repair and occasional tapping.

Carbon Steel
No. of Pieces	Tap Sizes Included	Die Sizes Included	Drill Bit Sizes Included	Container Type	Includes		Each
Right-Hand Thread
117	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, and M12 × 1.75 mm	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, and M12 × 1.75 mm	5/64", 7/64", 5/32", 1/4", 19/64", 5/16", 21/64", 3/8", 25/64", 13/32", 27/64", 29/64", 43 ga., 39 ga., 36 ga., 30 ga., 29 ga., 25 ga., 21 ga., 20 ga., 16 ga., 9 ga., 7 ga., 3 ga., B, F, H, I, J, O, Q, R, S, U, and Z	Plastic Case	Die Wrench (2), Extractor (5), Tap Wrench (3), Thread Gauge (2)	00000000	0000000

Hex Shank Combination Drill Bits/Taps for Drills and Screwdrivers

With a drill bit point to drive into the workpiece, these taps can drill and tap holes in a single step. A 1/4" hex shank connects them directly to tools such as drills and power screwdrivers. They're made of high-speed steel and are for use on most metal and plastic.

Their spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. All have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.

Uncoated taps are strong enough for most tapping jobs but have the shortest tool life. Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.

For technical drawings and 3-D models, click on a part number.

Metric

Thread				Drill Bit						Plug Chamfer
Size	Pitch, mm	Lg.	Overall Lg.	Size	Decimal Size Equivalent	Point Angle	No. of Flutes	Pitch Dia. Limit	Hex Shank Size		Each
Uncoated High-Speed Steel
M3	0.5	9/32"	1 27/64"	3/32"	0.0984"	110°	3	Not Rated	1/4"	0000000	000000
Titanium Nitride (TiN) Coated High-Speed Steel
M3	0.5	3/16"	1 27/64"	3/32"	0.0984"	110°	2	Not Rated	1/4"	00000000	00000

Hex Shank Taps for Drills and Screwdrivers

Insert these taps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank. They're made of high-speed steel and are for use on most metal and plastic. All have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.

For technical drawings and 3-D models, click on a part number.

Metric

Thread				Drill Bit				Plug Chamfer
Size	Pitch, mm	Lg.	Overall Lg.	Size	Decimal Size Equivalent	No. of Flutes	Hex Shank Size		Each
Uncoated High-Speed Steel
M3	0.5	7/16"	1 5/16"	2.5 mm	0.0984"	3	1/4"	0000000	000000

Combination Drill Bit/Taps

Spiral Flute

Straight Flute

Drill holes and cut threads without switching tools. Made of high-speed steel, these taps are for use on most metal and plastic. The square shank is compatible with tap holders for drill presses and milling machines. All have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.

Taps with spiral flutes keep chips clear by drawing them back toward the tap and out of the hole.

Uncoated taps are strong enough for most tapping jobs but have a shorter tool life. Titanium nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.

For technical drawings and 3-D models, click on a part number.

Metric

Thread				Drill Bit					Plug Chamfer
Size	Pitch, mm	Lg.	Overall Lg.	Size	Decimal Size Equivalent	Point Angle	Flute Type	Pitch Dia. Limit		Each
Uncoated High-Speed Steel
M3	0.5	13/32"	1 15/16"	2.5 mm	0.0984"	110°	Spiral	D3	0000000	000000
Titanium Nitride (TiN) Coated High-Speed Steel
M3	0.5	13/32"	1 15/16"	2.5 mm	0.0984"	118°	Straight	D3	0000000	00000