McMaster-Carr logo
    Filter by
    System of Measurement
    ID
    Attribute Image
    Shaft Diameter
    Attribute Image
    Plain Bearing Type
    Installation Permanence
    Flange OD
    Attribute Image
    For Housing ID
    Attribute Image
    Reamer Diameter
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Drill Bushing Texture
    Shaft Mount Type
    Flange Thickness
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    71 Products

    Press-Fit Reamer Bushings

    Image of ProductInUse. Front orientation. Drill Bushings. Press-Fit Reamer Bushings.
    Image of Product. Front orientation. Drill Bushings. Press-Fit Reamer Bushings.
    With ID tolerances sized specifically for reamers, these bushings ensure steady and precise hole finishing. Press them into a fixture plate with a manual or hydraulic press for permanent installation. Also known as headless bushings, these ANSI-type P bushings don’t need counterboring to be mounted flush. They are made of hardened, ground steel that holds its shape and resists wear, so they last for many cycles without needing to be replaced.
    Tolerance
    ID
    OD
    Lg.
    For Reamer
    Dia.
    ID
    OD
    Lg.
    Drill Bushing
    Type
    Material
    Hardness
    Each
    0.504"3/4"1"0.504"0.0006" to 0.001"0.0015" to 0.0018"-0.01" to 0.01"PSteelRockwell C619473N374000000

    Dry-Running Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Dry-Running Flanged Sleeve Bearings for Food and Beverage.
    Made of plastics permitted by the US FDA for contact with food, these bearings won’t release harmful, smelly, and distasteful impurities into your food or beverage production line. These self-lubricating plastics eliminate the need for oil, resulting in less maintenance and improved hygiene. You’ll find them inside food-processing equipment such as mixers, conveyors, and fillers.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    Moisture-Resistant UHMW Polyethylene—Virtually nonabsorbent, these bearings will keep their shape after washdowns. However, they aren’t suitable for high-temperature treatments such as steam cleaning.
    Ultra-Low-Friction Rulon 641—Get effortless motion with strength surpassing UHMW polyethylene. Rulon 641 bearings can also operate from cryogenic to oven-like temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Food Industry Std.
    USP
    Class
    Each
    Moisture-Resistant UHMW Polyethylene
    1/2"5/8"1/4"7/8"1/16"15 lb. @ 120 rpm29 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K10900000
    1/2"5/8"3/8"7/8"1/16"23 lb. @ 120 rpm29 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K1120000
    1/2"5/8"1/2"3/4"1/16"31 lb. @ 120 rpm20 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K2140000
    1/2"5/8"1/2"7/8"1/16"31 lb. @ 120 rpm29 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K990000
    1/2"5/8"5/8"3/4"1/16"39 lb. @ 120 rpm20 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K2150000
    1/2"5/8"5/8"3/4"3/32"39 lb. @ 120 rpm20 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K230000
    1/2"5/8"5/8"7/8"1/16"39 lb. @ 120 rpm29 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K2160000
    1/2"5/8"3/4"3/4"1/16"47 lb. @ 120 rpm20 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K2170000
    1/2"5/8"3/4"7/8"1/16"47 lb. @ 120 rpm29 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K970000
    1/2"5/8"1"3/4"1/16"60 lb. @ 120 rpm20 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K2180000
    1/2"5/8"1"3/4"3/32"60 lb. @ 120 rpm20 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K240000
    1/2"5/8"1"7/8"1/16"60 lb. @ 120 rpm29 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K2190000
    1/2"3/4"7/16"7/8"1/16"27 lb. @ 120 rpm29 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K2210000
    1/2"3/4"1/2"1"1/8"31 lb. @ 120 rpm37 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K960000
    1/2"3/4"3/4"7/8"1/16"47 lb. @ 120 rpm29 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K950000
    1/2"3/4"1"7/8"1/16"60 lb. @ 120 rpm29 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K2220000
    1/2"3/4"1"7/8"1/8"60 lb. @ 120 rpm29 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		—57785K250000
     
    Ultra-Low-Friction Rulon 641
    1/2"3/4"1"1"1/8"310 lb. @ 120 rpm185 lb. @ 120 rpmWhite-400 to 550FDA Compliant 21 CFR 177.1550
    		VI6371K42600000
     

    Dry-Running Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Sleeve Bearings. Dry-Running Sleeve Bearings for Food and Beverage.
    Made of plastics permitted by the US FDA for contact with food, these bearings won’t release harmful, smelly, and distasteful impurities into your food or beverage production line. These self-lubricating plastics eliminate the need for oil, resulting in less maintenance and improved hygiene. You’ll find them inside food-processing equipment such as mixers, conveyors, and fillers.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    Moisture-Resistant UHMW Polyethylene—Virtually nonabsorbent, these bearings will keep their shape after washdowns. However, they aren’t suitable for high-temperature treatments such as steam cleaning.
    Ultra-Low-Friction Rulon 641—Get effortless motion with strength surpassing UHMW polyethylene. Rulon 641 bearings can also operate from cryogenic to oven-like temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Specs. Met
    Each
    Moisture-Resistant UHMW Polyethylene
    1/2"5/8"3/8"23 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		57785K8900000
    1/2"5/8"1/2"31 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		57785K690000
    1/2"5/8"5/8"39 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		57785K130000
    1/2"5/8"3/4"47 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		57785K670000
    1/2"5/8"1"60 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		57785K140000
    1/2"3/4"1/2"31 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		57785K660000
    1/2"3/4"3/4"47 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		57785K870000
    1/2"3/4"1"60 lb. @ 120 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    		57785K150000
     
    Ultra-Low-Friction Rulon 641
    1/2"19/32"1/2"155 lb. @ 120 rpmWhite-400 to 550FDA Compliant 21 CFR 177.1550, USP Class VI6371K2400000
    1/2"19/32"1"310 lb. @ 120 rpmWhite-400 to 550FDA Compliant 21 CFR 177.1550, USP Class VI6371K2600000
    1/2"3/4"1/2"155 lb. @ 120 rpmWhite-400 to 550FDA Compliant 21 CFR 177.1550, USP Class VI6371K32300000
    1/2"3/4"3/4"235 lb. @ 120 rpmWhite-400 to 550FDA Compliant 21 CFR 177.1550, USP Class VI6371K2900000
    1/2"3/4"1"310 lb. @ 120 rpmWhite-400 to 550FDA Compliant 21 CFR 177.1550, USP Class VI6371K3100000
     

    Dry-Running Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Dry-Running Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Load PEEK—Get the strength of reinforced PTFE without compromising on heat resistance. With no additives, such as polyester fabric, PEEK bearings won’t melt at high temperatures. They’re also nearly as slippery and chemical resistant as plain PTFE.
    High-Load Moisture-Resistant Rulon LR—Won’t swell in wet or humid places, similar to acetal, but can support higher loads. These bearings also operate smoothly from cryogenic to oven-like temperatures.
    Ultra-Low-Friction Rulon J—These bearings glide effortlessly for applications with frequent starts and stops, such as conveyor systems.
    Harsh-Environment Vespel® Polyimide—The top choice for equipment exposed to extreme cold, heat, and chemicals. Vespel® bearings also support heavy loads at high speeds.
    Each
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    1-24
    25-99
    100-Up
    High-Load PEEK
    1/2"19/32"1/2"390 lb. @ 120 rpmBlack-40 to 5006621K135000000000000000000
    1/2"19/32"1"790 lb. @ 120 rpmBlack-40 to 5006621K136000000000000000
    1/2"5/8"3/8"290 lb. @ 120 rpmBlack-40 to 5006621K137000000000000000
    1/2"3/4"1/2"390 lb. @ 120 rpmBlack-40 to 5006621K138000000000000000
    1/2"3/4"3/4"590 lb. @ 120 rpmBlack-40 to 5006621K139000000000000000
    1/2"3/4"1"790 lb. @ 120 rpmBlack-40 to 5006621K141000000000000000
     
    High-Load Moisture-Resistant Rulon LR
    1/2"19/32"1/2"155 lb. @ 120 rpmMaroon-400 to 5506362K13000000000000000
    1/2"19/32"1"310 lb. @ 120 rpmMaroon-400 to 5506362K15000000000000000
    1/2"5/8"3/8"115 lb. @ 120 rpmMaroon-400 to 5506362K16000000000000000
    1/2"3/4"1/2"155 lb. @ 120 rpmMaroon-400 to 5506362K1430000000000000
    1/2"3/4"3/4"235 lb. @ 120 rpmMaroon-400 to 5506362K145000000000000000
    1/2"3/4"1"310 lb. @ 120 rpmMaroon-400 to 5506362K146000000000000000
     
    Ultra-Low-Friction Rulon J
    1/2"19/32"1/2"115 lb. @ 120 rpmGold-400 to 5506377K73000000000000000
    1/2"19/32"1"235 lb. @ 120 rpmGold-400 to 5506377K75000000000000000
    1/2"5/8"3/8"85 lb. @ 120 rpmGold-400 to 5506377K76000000000000000
    1/2"3/4"1/2"115 lb. @ 120 rpmGold-400 to 5506377K3700000000000000
    1/2"3/4"3/4"175 lb. @ 120 rpmGold-400 to 5506377K38000000000000000
    1/2"3/4"1"235 lb. @ 120 rpmGold-400 to 5506377K39000000000000000
     
    Harsh-Environment Vespel® Polyimide
    1/2"19/32"1/2"1,200 lb. @ 120 rpmBlack-400 to 55058315K77000000000000000
    1/2"3/4"1/2"1,200 lb. @ 120 rpmBlack-400 to 55058315K340000000000000000
     

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1/2"11/16"1 3/8"1,350 lb. @ 120 rpmMineral Oil10 to 2206391K35100000
     

    Dry-Running Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Dry-Running Flanged Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Load PEEK—Get the strength of reinforced PTFE without compromising on heat resistance. With no additives, such as polyester fabric, PEEK bearings won’t melt at high temperatures. They’re also nearly as slippery and chemical resistant as plain PTFE.
    High-Load Moisture-Resistant Rulon LR—Won’t swell in wet or humid places, similar to acetal, but can support higher loads. These bearings also operate smoothly from cryogenic to oven-like temperatures.
    Ultra-Low-Friction Rulon J—These bearings glide effortlessly for applications with frequent starts and stops, such as conveyor systems.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Each
    High-Load PEEK
    1/2"19/32"1/2"7/8"3/64"390 lb. @ 120 rpm360 lb. @ 120 rpmBlack-20 to 4506627K421000000
    1/2"19/32"3/4"7/8"3/64"590 lb. @ 120 rpm360 lb. @ 120 rpmBlack-20 to 4506627K42200000
    1/2"19/32"1"7/8"3/64"790 lb. @ 120 rpm360 lb. @ 120 rpmBlack-20 to 4506627K42300000
    1/2"3/4"1/2"1"1/8"390 lb. @ 120 rpm460 lb. @ 120 rpmBlack-20 to 4506627K42400000
    1/2"3/4"3/4"1"1/8"590 lb. @ 120 rpm460 lb. @ 120 rpmBlack-20 to 4506627K42500000
    1/2"3/4"1"1"1/8"790 lb. @ 120 rpm460 lb. @ 120 rpmBlack-20 to 4506627K42600000
     
    High-Load Moisture-Resistant Rulon LR
    1/2"19/32"1/2"7/8"3/64"155 lb. @ 120 rpm145 lb. @ 120 rpmMaroon-400 to 5506362K30400000
    1/2"19/32"3/4"7/8"3/64"235 lb. @ 120 rpm145 lb. @ 120 rpmMaroon-400 to 5506362K30500000
    1/2"19/32"1"7/8"3/64"310 lb. @ 120 rpm145 lb. @ 120 rpmMaroon-400 to 5506362K30600000
    1/2"3/4"1/2"1"1/8"155 lb. @ 120 rpm185 lb. @ 120 rpmMaroon-400 to 5506362K21700000
    1/2"3/4"3/4"1"1/8"235 lb. @ 120 rpm185 lb. @ 120 rpmMaroon-400 to 5506362K21800000
    1/2"3/4"1"1"1/8"310 lb. @ 120 rpm185 lb. @ 120 rpmMaroon-400 to 5506362K21900000
     
    Ultra-Low-Friction Rulon J
    1/2"19/32"1/2"7/8"3/64"115 lb. @ 120 rpm110 lb. @ 120 rpmGold-400 to 5506377K11400000
    1/2"19/32"3/4"7/8"3/64"175 lb. @ 120 rpm110 lb. @ 120 rpmGold-400 to 5506377K11500000
    1/2"19/32"1"7/8"3/64"235 lb. @ 120 rpm110 lb. @ 120 rpmGold-400 to 5506377K11600000
    1/2"3/4"1/2"1"1/8"115 lb. @ 120 rpm140 lb. @ 120 rpmGold-400 to 5506377K1500000
    1/2"3/4"3/4"1"1/8"175 lb. @ 120 rpm140 lb. @ 120 rpmGold-400 to 5506377K1600000
    1/2"3/4"1"1"1/8"235 lb. @ 120 rpm140 lb. @ 120 rpmGold-400 to 5506377K1700000
     
    back to top