1 3⁄4" ID Drill Bushings

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as frames, supports, and conduit.

Stress-Relieved Heat Treatment—Tubes that are stress relieved minimize warping during machining.

Seamless—Seamless tubes are stronger than welded tubes.

DOM—DOM (drawn over mandrel) welded tubes are stronger than ERW (electric resistance welded) tubes.

Heat Treatable—Heat treatable tubes can be surface hardened.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	ID	Fabrication	Mechanical Tube Type	Heat Treatment	Heat Treatable	Yield Strength, psi	Hardness	Specs. Met		1" Long	3" Long	1/2 ft. Long	1 ft. Long	2 ft. Long	3 ft. Long	6 ft. Long	8 ft. Long
1/8" Thick Wall



	2"	1 3/4"	Welded	ERW	—	No	32,000	Rockwell B55 (Soft)	ASTM A513 Type 1	7767T316	—	—	—	000000	—	000000	000000	—


	1/4" Thick Wall



			2 1/4"	1 3/4"	Welded	DOM	Stress Relieved	No	65,000	Rockwell B80 (Medium)	ASTM A513 Type 5	7767T296	—	—	—	00000	—	000000	000000	—


			3/8" Thick Wall



					2 1/2"	1 3/4"	Welded	DOM	—	No	65,000	Rockwell B80 (Medium)	ASTM A513 Type 5	7767T86	—	—	000000	00000	0000000	000000	000000	0000000


					2 1/2"	1 3/4"	Welded	DOM	—	No	70,000	Rockwell B85 (Medium)	ASTM A513 Type 5	6045N691	—	000000	—	—	—	—	—	—
					2 1/2"	1 3/4"	Welded	DOM	—	No	70,000	Rockwell B85 (Medium)	ASTM A513 Type 5	6045N689	000000	—	—	—	—	—	—	—


					1/2" Thick Wall



							2 3/4"	1 3/4"	Welded	DOM	—	No	65,000	Rockwell B80 (Medium)	ASTM A513 Type 5	7767T89	—	—	00000	000000	000000	000000	000000	—


							5/8" Thick Wall



									3"	1 3/4"	Welded	DOM	—	No	70,000	Rockwell B85 (Medium)	ASTM A513 Type 5	6045N55	—	—	—	000000	—	000000	000000	—


									3/4" Thick Wall



											3 1/4"	1 3/4"	Seamless	—	—	Yes	65,000	Rockwell B80 (Medium)	ASTM A519	7767T797	—	—	—	000000	—	000000	—	—

Multipurpose 932 Bearing Bronze Round Tubes

Balancing strength, corrosion resistance, and machinability, 932 is everything you want in a bearing bronze. It's most commonly made into thrust bearings and bushings. Also known as SAE 660.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	ID	Temper Designation	Specs. Met		3" Long	6 1/2" Long	13" Long
1/8" Thick Wall



	2"	1 3/4"	M07	ASTM B505	8911K313	000000	000000	000000


	1/4" Thick Wall



			2 1/4"	1 3/4"	M07	ASTM B505	8911K414	00000	00000	000000


			3/8" Thick Wall



					2 1/2"	1 3/4"	M07	ASTM B505	8911K417	00000	000000	000000


					1/2" Thick Wall



							2 3/4"	1 3/4"	M07	ASTM B505	8911K363	00000	000000	000000


							5/8" Thick Wall



									3"	1 3/4"	M07	ASTM B505	8911K379	000000	000000	000000


									7/8" Thick Wall



											3 1/2"	1 3/4"	M07	ASTM B505	8911K394	000000	000000	000000

Telescoping Delrin® Acetal Round Tubes

Telescoping tubes, also known as bushing stock, slide over rods and inside shafts to increase or decrease the diameter. Their precise sizing also allows ascending sizes to fit inside each other to increase the wall thickness.

Easy to machine to close tolerances, these dimensionally stable tubes resist expanding when exposed to heat and moisture. They have a naturally slippery surface along with excellent wear resistance. Use them to make precision gears, bushings, and bearings. Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

									White
	OD	ID	Fabrication	Temp., ° F	Lg.	Tensile Strength, psi	Impact Strength, ft·lbf/in	Food Industry Std.		Each
Tight Tolerance







				1/8" Thick Wall (-0.005" to 0.005" Tolerance)

				2"	1 3/4"	Extruded	0 to 180	6"	7,690	1 to 1.5	FDA Standard, NSF Standard	1989T17	0000000

Wear-Resistant Nylon Round Tubes

Because these wear-resistant nylon 6/6 tubes have a slippery surface that reduces friction, they’re often machined into bearings, gears, and valve seats.

Oversized Tolerance—Oversized tubes have an oversized OD and an undersized ID for finishing to the sizes listed.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Fabrication	Min. Temp., ° F	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Color	Flammability Rating	Food Industry Std.		Each
Oversized Tolerance







	1/8" Thick Wall

	2"	1 3/4"	5	Extruded	-40	165	11,200 to 12,300	0.6 to 1.4	Off-White	UL 94 HB	FDA Standard	8628K97	000000

Machinable Cast Nylon Round Tubes

These cast nylon 6 tubes are easier to machine than other standard nylon 6/6 rods. They’re also better electrical insulators. Use them to make pulleys, bushings, and bearings. This material is comparable to Nylatron and Nycast.

Oversized Tolerance—Oversized tubes have an oversized OD and an undersized ID for finishing to the sizes listed.

	Min. Temp., ° F	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Color	Flammability Rating	Food Industry Std.	Choose a Length, ft.		Per Ft.
Oversized Tolerance







	1/2" Thick Wall

	2 3/4"	1 3/4"	Cast	-20	200	10,000	1.5	Off-White	UL 94 HB	FDA Standard	1, 2	85005K182	000000

Oil-Filled Cast Nylon Round Tubes

Impregnated with oil, these tubes remain slippery over time. Use them to fabricate pulleys, bushings, and bearings for use in hard-to-reach areas where adding a lubricant would be difficult. Because they are made of cast nylon 6, they are easier to machine than standard nylon rods, plus they’re better electrical insulators. This material is comparable to Nycast and Nyloil.

Oversized Tolerance—Oversized tubes have an oversized OD and an undersized ID for finishing to the sizes listed.

	Min. Temp., ° F	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Color	Choose a Length, ft.		Per Ft.
Oversized Tolerance







	1/2" Thick Wall

	2 3/4"	1 3/4"	Cast	32	230	9,500 to 10,000	1.2 to 1.4	Green	1, 2	84755K484	000000

Telescoping UHMW Polyethylene Round Tubes

Telescoping tubes, also known as bushing stock, slide over rods and inside shafts to increase or decrease the diameter. Their precise sizing allows ascending sizes to fit inside each other to create a thicker wall. These impact- and wear-resistant tubes offer 360° protection from scrapes and strikes to wires, cords, and anything that can slide through them. UHMW has a low-friction surface that resists sticking and binding.

	Fabrication	Min. Temp., ° F	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Color		Each
Undersized Tolerance/Tight Tolerance







	1/4" Thick Wall (-0.06" to 0" Tolerance)

	2 1/4"	1 3/4"	6"	Extruded	-20	180	4,350 to 5,800	16.8	White	1988T14	000000

High-Temperature Cast Nylon Round Tubes

A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes. This material is comparable to Nylatron and Nycast.

Oversized Tolerance—Oversized tubes have an oversized OD and an undersized ID for finishing to the sizes listed.

								1 ft. Long		2 ft. Long
	OD	ID	Fabrication	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Color		Each		Each
Oversized Tolerance







				1/2" Thick Wall

				2 3/4"	1 3/4"	Cast	250	10,000 to 13,500	1 to 2.5	Blue	8413N141	000000	8413N142	0000000

Highly Wear-Resistant Machinable Cast Nylon Round Tubes

The addition of MDS gives these tubes exceptional wear resistance along with a self-lubricating surface. They're made of cast nylon 6, making them easier to machine and better electrical insulators than other MDS-filled nylon tubes. Tubes can be used to fabricate pulleys, bushings, and bearings installed in hard-to-reach areas where adding a lubricant would be difficult. This material is comparable to Nylatron and Nycast.

Oversized Tolerance—Oversized tubes have an oversized OD and an undersized ID for finishing to the sizes listed.

	Fabrication	Min. Temp.	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Color		Each
Oversized Tolerance







	1/2" Thick Wall

	2 3/4"	1 3/4"	1	Cast	Not Rated	230	10,000	1.4	Black	4363N124	000000


	2 3/4"	1 3/4"	2	Cast	Not Rated	230	10,000	1.4	Black	4363N125	00000

Corrosion-Resistant 954 Bearing Bronze Round Tubes

One of the most corrosion-resistant bearing bronze alloys, 954 withstands everything from sea water to sulfuric acid. It's often turned into bearings and valve bodies for demanding environments such as salt mines. Also known as aluminum bronze. If you need similar corrosion resistance with even greater strength, consider 955 bearing bronze instead.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	ID	Temper Designation	Specs. Met		6 1/2" Long	13" Long
1/4" Thick Wall



	2 1/4"	1 3/4"	M07	ASTM B505	8916K5	000000	0000000


	3/8" Thick Wall



			2 1/2"	1 3/4"	M07	ASTM B505	8916K81	000000	000000


			1/2" Thick Wall



					2 3/4"	1 3/4"	M07	ASTM B505	8916K85	000000	000000


					5/8" Thick Wall



							3"	1 3/4"	M07	ASTM B505	8916K97	000000	000000

Highly Machinable 936 Bearing Bronze Round Tubes

With almost twice as much lead, 936 bearing bronze machines more easily than 932. It's often made into bearings and bushings for oil pumps and gasoline engines. Also known as modified SAE 64.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	ID	Temper Designation	Specs. Met		6" Long	13" Long
1/4" Thick Wall



	2 1/4"	1 3/4"	M07	ASTM B505	8918K118	000000	0000000


	3/8" Thick Wall



			2 1/2"	1 3/4"	M07	ASTM B505	8918K129	000000	000000


			1/2" Thick Wall



					2 3/4"	1 3/4"	M07	ASTM B505	8918K134	000000	000000


					5/8" Thick Wall



							3"	1 3/4"	M07	ASTM B505	8918K146	000000	000000

Oil-Embedded 841 Bearing Bronze Round Tubes

With a porous surface that releases oil over time, this bronze lubricates itself. Turn it into parts that you can't easily access to relubricate, such as bearings, well pumps, and turbine blades. The oil may burn away if temperatures climb too high, however. For extreme heat up to 700° F, consider graphite-embedded bearing bronze instead.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	ID	Temper Designation	Specs. Met		3" Long	6 1/2" Long
1/4" Thick Wall



	2 1/4"	1 3/4"	Not Rated	ASTM B438	8931K191	000000	0000000


	3/8" Thick Wall



			2 1/2"	1 3/4"	Not Rated	ASTM B438	8931K301	00000	000000


			1/2" Thick Wall



					2 3/4"	1 3/4"	Not Rated	ASTM B438	8931K401	000000	000000


					5/8" Thick Wall



							3"	1 3/4"	Not Rated	ASTM B438	8931K471	000000	000000


							7/8" Thick Wall



									3 1/2"	1 3/4"	Not Rated	ASTM B438	8931K551	000000	000000