About Plastic
More
About Plain Bearings
More
Press-Fit Drill Bushings
Mount flush with jig plates for precise drilling. These bushings can also be used as spacers, shims, and machinery bushings.
Don't see the size you need? Additional sizes are available.
For technical drawings and 3-D models, click on a part number.
Tolerance | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Lg. | For Drill Bit Size | ID | OD | Lg. | Drill Bushing Type | Material | Hardness | 1-5 | 6-11 | 12-Up | |
0.4375" ID | ||||||||||||
| 5/8" | 1/4" | 7/16" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 000000 | 00000 | 00000 |
| 5/8" | 5/16" | 7/16" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 0000 | 0000 | 0000 |
| 5/8" | 3/8" | 7/16" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 0000 | 0000 | 0000 |
| 5/8" | 1/2" | 7/16" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 0000 | 0000 | 0000 |
| 5/8" | 5/8" | 7/16" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 0000 | 0000 |
| 5/8" | 3/4" | 7/16" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 0000 | 0000 |
| 5/8" | 1" | 7/16" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 0000 | 0000 |
| 5/8" | 1 1/4" | 7/16" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
| 5/8" | 1 3/8" | 7/16" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
| 5/8" | 1 3/4" | 7/16" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 0000 |
| 5/8" | 2 1/8" | 7/16" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 3/4" | 5/16" | 7/16" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 0000 | 0000 | 0000 |
| 3/4" | 3/8" | 7/16" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 0000 | 0000 |
| 3/4" | 1/2" | 7/16" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 0000 | 0000 |
| 3/4" | 5/8" | 7/16" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 0000 | 0000 | 0000 |
| 3/4" | 3/4" | 7/16" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 0000 | 0000 |
| 3/4" | 1" | 7/16" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 0000 |
| 3/4" | 1 1/4" | 7/16" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 0000 | 0000 |
| 3/4" | 1 3/8" | 7/16" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
| 3/4" | 1 1/2" | 7/16" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 0000 | 0000 |
| 3/4" | 1 3/4" | 7/16" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
| 3/4" | 2 1/8" | 7/16" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 3/4" | 2 1/2" | 7/16" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
Finish-Your-Own Press-Fit Drill Bushings
Larger OD tolerances than standard press-fit bushings allow finishing. These bushings should be machine ground. Mount flush with jig plates for precise drilling. Drill bushings can also be used as spacers, shims, and machinery bushings.
For technical drawings and 3-D models, click on a part number.
Press-Fit Drill Bushings with Head
The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole. Drill bushings can also be used as spacers, shims, and machinery bushings.
Don't see the size you need? Additional sizes are available.
For technical drawings and 3-D models, click on a part number.
Head | Tolerance | Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Lg. | For Drill Bit Size | OD | Thick. | ID | OD | Lg. | Drill Bushing Type | Material | Hardness | 1-5 | 6-11 | 12-Up | |
0.4375" ID | ||||||||||||||
| 5/8" | 1/4" | 7/16" | 51/64" | 7/32" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 000000 | 000000 | 00000 |
| 5/8" | 3/8" | 7/16" | 51/64" | 7/32" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 00000 | 0000 | 0000 |
| 5/8" | 1/2" | 7/16" | 51/64" | 7/32" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 00000 | 0000 | 0000 |
| 5/8" | 5/8" | 7/16" | 51/64" | 7/32" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 0000 |
| 5/8" | 3/4" | 7/16" | 51/64" | 7/32" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 0000 |
| 5/8" | 1" | 7/16" | 51/64" | 7/32" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
| 5/8" | 1 3/8" | 7/16" | 51/64" | 7/32" | 0.0001" to 0.0005" | 0.0014" to 0.0017" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
| 3/4" | 1/4" | 7/16" | 59/64" | 7/32" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
| 3/4" | 3/8" | 7/16" | 59/64" | 7/32" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 0000 |
| 3/4" | 1/2" | 7/16" | 59/64" | 7/32" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 0000 |
| 3/4" | 5/8" | 7/16" | 59/64" | 7/32" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
| 3/4" | 3/4" | 7/16" | 59/64" | 7/32" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
| 3/4" | 1" | 7/16" | 59/64" | 7/32" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
Removable Drill Bushings
Replace worn bushings and quickly change IDs without needing to repeatedly use a lever press. Instead of pressing bushings in and out of your jig fixture, which can cause damage, these bushings slide in and out of sleeves (sold separately). By swapping in a bushing with a different ID, you can change the size of your bit and still use the same hole in your fixture. All are made to tight dimensional tolerances for consistent, accurate results, even as you change them in and out. They're also known as slip-fixed and renewable bushings.
Choose a sleeve with a length that matches the length of your bushing. To prevent bushings from spinning inside the sleeve as you drill, pair a standard sleeve with a lock screw, or use a locking sleeve.
Lock screws thread into a hole in your jig. The head of the screw fits into a notch on the bushing's head, which keeps the bushing from spinning.
For additional sizes, see Made-to-Order Removable Drill Bushings.
For technical drawings and 3-D models, click on a part number.
Head | Tolerance | Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Lg. | For Drill Bit Size | OD | Thick. | Lock Screw/Bushing Ctr.-to-Ctr. | ID | OD | Lg. | Drill Bushing Type | Material | 1-5 | 6-11 | 12-Up | |
0.4375" ID | ||||||||||||||
| 5/8" | 1/2" | 7/16" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 000000 | 000000 | 000000 |
| 5/8" | 5/8" | 7/16" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
| 5/8" | 3/4" | 7/16" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
| 5/8" | 1" | 7/16" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
| 3/4" | 3/8" | 7/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
| 3/4" | 1/2" | 7/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
| 3/4" | 3/4" | 7/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
| 3/4" | 1" | 7/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
| 3/4" | 1 3/8" | 7/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
Shoulder | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Bushing OD | Thread Size  | Head OD | O'all Lg. | Head-to-Shoulder Lg. | Lg. | Wd. | Hex Size | For Drill Bushing Type | Material | Pkg. Qty. | Pkg. | |
Slotted | ||||||||||||
| 1/4", 3/8", 7/16", 9/16", 5/8" | 10-32 | 3/8" | 1/2" | 1/4" | 0.138" | 1/4" | __ | SF | Steel | 10 | 0000000 | 000000 |
| 5/16", 1/2", 3/4" | 5/16"-18 | 5/8" | 5/8" | 1/4" | 0.138" | 3/8" | __ | SF | Steel | 10 | 0000000 | 00000 |
Hex | ||||||||||||
| 1/4", 3/8", 7/16", 9/16", 5/8" | 10-32 | 3/8" | 1/2" | 1/4" | 0.138" | 1/4" | 1/8" | SF | Steel | 10 | 0000000 | 00000 |
| 5/16", 1/2", 3/4" | 5/16"-18 | 5/8" | 5/8" | 1/4" | 0.138" | 3/8" | 3/16" | SF | Steel | 10 | 0000000 | 00000 |
| For Bushing OD | ID | OD | Lg. | ID Tolerance | For Drill Bushing Type | Material | Hardness | Sleeve ANSI Number | Each | |
| 5/8" | 5/8" | 7/8" | 1/2" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-56-8 | 00000000 | 00000 |
| 5/8" | 5/8" | 7/8" | 5/8" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-56-10 | 00000000 | 00000 |
| 5/8" | 5/8" | 7/8" | 3/4" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-56-12 | 00000000 | 00000 |
| 5/8" | 5/8" | 7/8" | 1" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-56-16 | 00000000 | 00000 |
| 3/4" | 3/4" | 1" | 3/8" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-6 | 00000000 | 00000 |
| 3/4" | 3/4" | 1" | 1/2" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-8 | 00000000 | 00000 |
| 3/4" | 3/4" | 1" | 3/4" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-12 | 00000000 | 00000 |
| 3/4" | 3/4" | 1" | 1" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-16 | 00000000 | 00000 |
| 3/4" | 3/4" | 1" | 1 3/8" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-22 | 00000000 | 00000 |
Sleeves for Removable Drill Bushings
Avoid wear caused by repeatedly pressing bushings into your jig fixture. Instead, press fit these sleeves into the fixture one time, and then swap bushings with different IDs in and out to change the size of your bit. Also known as type L headless liner bushings, they're sized for use with removable drill bushings (sometimes called slip-fixed and renewable bushings). Made of hardened steel, they won't wear as you slide the bushings in and out.
For technical drawings and 3-D models, click on a part number.
| For Bushing OD | ID | OD | Lg. | ID Tolerance | For Drill Bushing Type | Material | Hardness | Sleeve ANSI Number | Each | |
| 7/16" | 7/16" | 5/8" | 1/2" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-40-8 | 00000000 | 00000 |
| 7/16" | 7/16" | 5/8" | 5/8" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-40-10 | 00000000 | 0000 |
| 7/16" | 7/16" | 5/8" | 3/4" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-40-12 | 00000000 | 0000 |
| 5/8" | 5/8" | 7/8" | 1/2" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-56-8 | 00000000 | 0000 |
| 5/8" | 5/8" | 7/8" | 5/8" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-56-10 | 00000000 | 00000 |
| 5/8" | 5/8" | 7/8" | 3/4" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-56-12 | 00000000 | 00000 |
| 5/8" | 5/8" | 7/8" | 1" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-56-16 | 00000000 | 00000 |
| 3/4" | 3/4" | 1" | 3/8" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-6 | 00000000 | 00000 |
| 3/4" | 3/4" | 1" | 1/2" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-8 | 00000000 | 00000 |
| 3/4" | 3/4" | 1" | 3/4" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-12 | 00000000 | 00000 |
| 3/4" | 3/4" | 1" | 1" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-16 | 00000000 | 00000 |
| 3/4" | 3/4" | 1" | 1 3/8" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-22 | 00000000 | 00000 |
Drill Bushings for Plastic
Serrations line the sides of these bushings to keep them from spinning while you drill. Also known as jig bushings, they’re pressed or molded into plastic tooling to guide drill bits, counterbores, and reamers. They help you create consistent, accurate holes from part to part.
Also Available: Other sizes. Please select 3378A999 and specify ID, OD, and length.
For technical drawings and 3-D models, click on a part number.
Tolerance | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| OD | Lg. | For Drill Bit Size | ID | OD | Drill Bushing Type | Material | Hardness | Each | |
0.4375" ID | |||||||||
| 5/8" | 3/4" | 7/16" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 000000 |
Secure-Hold Drill Bushings for Plastic
Designed to grip slippery plastic, the knurls on these bushings keep them from spinning while you drill. Their hold is stronger than serrated bushings, so they can withstand more force. Press or mold into plastic tooling to guide your drill bit and create accurate, consistent holes.
Also Available: Other sizes. Please select 3379A999 and specify ID, OD, and length.
For technical drawings and 3-D models, click on a part number.
Tolerance | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| OD | Lg. | For Drill Bit Size | ID | OD | Drill Bushing Type | Material | Hardness | Each | |
0.4375" ID | |||||||||
| 5/8" | 3/4" | 7/16" | 0.0001" to 0.0005" | 0.01" to 0.025" | DG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
Drill Bushings for Soft Metal and Wood
Serrations on these bushings dig into wood, aluminum, and other soft metals to keep them from spinning while you drill. Also known as jig bushings, they fit inside fixture plates to guide drill bits, counterbores, and reamers. They improve accuracy so that your drilled holes and cuts are consistent from part to part.
Also Available: Other sizes. Please select 3377A999 and specify ID, OD, and length.
Tolerance | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| OD | Lg. | For Drill Bit Size | ID | OD | Drill Bushing Type | Material | Hardness | Each | |
0.4375" ID | |||||||||
| 3/4" | 1/2" | 7/16" | 0.0001" to 0.0005" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 000000 |
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
PTFE Plastic Bearings | ||||||
|---|---|---|---|---|---|---|
For 7/16" Shaft Dia. | ||||||
| 9/16" | 1/2" | 15 lbs. @ 120 rpm | White | -350° to 500° | 0000000 | 00000 |
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
|---|---|---|---|---|---|---|
For 7/16" Shaft Dia. | ||||||
| 9/16" | 1/2" | 870 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
| 9/16" | 5/8" | 1,050 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 9/16" | 1" | 1,750 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 9/16" | 1 1/4" | 2,150 lbs. @ 120 rpm | Required | -350° to 450° | 0000000 | 0000 |
| 5/8" | 1/2" | 870 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 5/8" | 3/4" | 1,300 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 5/8" | 1" | 1,750 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 7/16" Shaft Dia. | |||||||||
| 9/16" | 1/2" | 11/16" | 1/16" | 47 lbs. @ 120 rpm | 30 lbs. @ 120 rpm | White | -20° to 250° | 00000000 | 00000 |
Acetal Bearings | |||||||||
For 7/16" Shaft Dia. | |||||||||
| 9/16" | 1/2" | 11/16" | 1/16" | 42 lbs. @ 120 rpm | 27 lbs. @ 120 rpm | White | -40° to 180° | 0000000 | 0000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 7/16" Shaft Dia. | ||||||||||
| 9/16" | 1/2" | 11/16" | 1/16" | 870 lbs. @ 120 rpm | 760 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
| 9/16" | 3/4" | 11/16" | 1/16" | 1,300 lbs. @ 120 rpm | 760 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
| 5/8" | 3/4" | 7/8" | 1/8" | 1,300 lbs. @ 120 rpm | 1,200 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 7/16" Shaft Dia. | |||||||||
| 9/16" | 1/2" | 11/16" | 1/16" | 980 lbs. @ 120 rpm | 990 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 000000 |
| 9/16" | 3/4" | 11/16" | 1/16" | 1,450 lbs. @ 120 rpm | 990 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 5/8" | 3/4" | 7/8" | 1/8" | 1,450 lbs. @ 120 rpm | 2,000 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
Wear-Resistant Nylon Tubes
- Color: Off-White
- Temperature Range: -40° to 165° F
- Tensile Strength: 11,200-12,300 psi (Good)
- Impact Strength: 0.6-1.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell R108-R121 (Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D6779, FDA Compliant 21 CFR 177.1500, UL 94 HB
Because these wear-resistant nylon 6/6 tubes have a slippery surface that reduces friction, they’re often machined into bearings, gears, and valve seats.
For technical drawings and 3-D models, click on a part number.
5 ft. Lg. | |||||
|---|---|---|---|---|---|
| OD | OD Tolerance | ID | ID Tolerance | Each | |
1/32" Wall Thick. | |||||
| 1/2" | -0.005" to 0.005" | 7/16" | -0.005" to 0.005" | 0000000 | 00000 |