Filter by
For Use With
Shaft Orientation
No-Load Rotational Speed
Performance
DFARS Specialty Metals
Export Control Classification Number (ECCN)
RoHS
For Tool Drive Direction
Material
For Holding
General-Purpose Right-Angle Drill Head Adapters
 |
For a variety of maintenance drill jobs. Use this adapter to change your drill into a right-angle tool for access into hard-to-reach places. Install your bit shank to a keyed chuck that can be tightened with the included key. Connect the adapter to your hand-held drill with the 3/8" round shaft.
Drill Connection Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Size | For Bit Shank Type | For Max. Bit Shank Size | Max. No-Load Rotational Speed, rpm | Chuck Mfr. | Head Ht. | Body Lg. | Includes | Each | ||
| Round | 3/8" | Hex, Round | 3/8" | 4,000 | Jacobs | 4 1/8" | 6 1/8" | Wrench | 2778A15 | 000000 | |
Tight-Clearance Right-Angle Drill Head Adapters
 |
Work in tight spaces with as little as 2" clearance using threaded-shank drill bits. Connect to your hand-held drill with the 1/4" round shaft.
Drill Connection Shaft | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Type | Size | For Bit Shank Type | For Bit Shank Thread Size | Max. No-Load Rotational Speed, rpm | Head Ht. | Body Lg. | Each | ||
| Round | 1/4" | Threaded | 1/4"-28 | 2,500 | 1 1/8" | 7 5/16" | 8787A14 | 000000 | |
Multiangle Drill Head Adapters
 |  |
Drill Connection Shaft | ||||||
|---|---|---|---|---|---|---|
Type | Size | For Bit Shank Type | For Max. Bit Shank Size | Each | ||
| Hex | 3/8" | Hex | 3/8" | 2496A11 | 000000 | |
Small-Hole Drill Chuck Adapters
 |  |  |
Adapter Shown Installed | Round Shank | Hex Shank |
Adapt your tools to hold wire-gauge drill bits, so you can drill small, precise holes. A knurled sleeve gives you the grip you need to tighten the jaws around the bit.
All adapters can be used with drill presses and hand-held power drills.
Round Shank—Round-shank adapters also fit into collets, so you can use them with rotary grinding tools.
Hex Shank—Hex-shank adapters also fit in power screwdrivers and other tools that accept a ¼" hex shank.
For Bit Shank Size | For Bit Wire Ga. Size | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank Type | Shank Size | Inch | Metric, mm | Min. | Max. | Max. No-Load Rotational Speed, rpm | Chuck Type | Jaw Material | Body Material | Head Dia. | Overall Lg. | For Use With | For Tool Drive Direction | Each | ||
| Round | 1/8" | 0.005" to 0.04" | 0.1 to 1 | 99 Ga. | 60 Ga. | Not Rated | Keyless | Steel | Steel | 1/4" | 1 5/16" | Die Grinders, Drill Presses, Grinders for Bits and Burs, Handheld Power Drills, Rotary Tools | Clockwise, Counterclockwise | 30505A5 | 000000 | |
| Hex | 1/4" | 0.014" to 0.039" | 0.3 to 1 | 80 Ga. | 60 Ga. | 30,000 | Keyless | Steel | Steel | 3/8" | 1 7/8" | Drill Presses, Handheld Power Drills, Power Screwdrivers | Clockwise, Counterclockwise | 30505A11 | 0000 | |
Long-Life Right-Angle Drill Head Adapters
 |
The gears, shafts, and spindle are heat-treated alloy steel for a long life. Use this adapter to change your drill into a right-angle tool for access into hard-to-reach places. Install your bit shank to a keyed chuck that can be tightened with the included key. Connect the adapter to your hand-held drill with the 1/4" round shaft.
Drill Connection Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Size | For Bit Shank Type | For Max. Bit Shank Size | Max. No-Load Rotational Speed, rpm | Chuck Mfr. | Head Ht. | Body Lg. | Includes | Each | ||
| Round | 1/4" | Hex, Round | 1/4" | 2,500 | Jacobs | 2 7/8" | 7 1/8" | Drill Chuck for 1/32"-1/4" Bit Shank Size | 4450A4 | 0000000 | |
Tight-Clearance Right-Angle Drill Head Adapter Kits
 |
Kit includes a right-angle adapter and six threaded-shank high-speed drill bits. The adapter allows you to work in tight spaces with as little as 2" clearance. Connect to your hand-held drill with the 1/4" round shaft. For additional drill bit sizes, see Threaded-Shank Drill Bits.
