Drinking Water Chillers
1.5 gph shown
Attach one of these chillers to your nonrefrigerated drinking fountains to provide cold water. You can also install a bottle filler or drinking fountain nozzle directly to the unit. Made of galvanized steel for corrosion resistance, chillers are factory set at 50° F but can be adjusted. They meet NSF/ANSI safety standards for use with drinking water. Chillers need 6” clearance in front of the unit and 3” behind the unit for proper ventilation.
Inlet | Outlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gph | For No. of Fountains/Fillers | Wd. | Dp. | Ht. | Tube Connection Type | For Tube OD | Tube Connection Type | For Tube OD | Electrical Connection Type | Motor Power, hp | Current, A  | Voltage | Specifications Met | Each | |
| 1.5 | 1 | 17" | 7" | 14" | Solder Connect | 1/4" | Solder Connect | 1/4" | Wire Leads | 1/18 | 2 | 120V AC | NSF/ANSI 61, UL Listed | 0000000 | 0000000 |
| 10 | 2 | 19 1/2" | 7 7/8" | 22" | Solder Connect | 3/8" | Solder Connect | 3/8" | Wire Leads | 1/4 | 6 | 120V AC | NSF/ANSI 61, UL Listed | 0000000 | 00000000 |