Roller chain links engage with matched sprocket teeth to transmit power between rotating shafts.

This 304 stainless steel roller chain is more corrosion resistant than treated steel roller chain.

Made of 316 stainless steel, this is our most corrosion-resistant chain.

Plastic bushings as well as stainless steel pins and outer side plates give this chain a longer service life than other lightweight chain.

A rubber ring seals grease between the bushings and pins and keeps out dust and other contaminants.

This self-lubricating nickel-plated steel chain has better corrosion resistance than steel chain and does not require regular maintenance.

This treated steel chain has over six times the capacity of stainless steel chain.

Also known as leaf chain and counterbalance chain, this chain is used with pulleys rather than sprockets for low-speed pulling and as counterweight chain for machine tools, elevator and oven doors, and forklift masts.

This steel chain handles higher loads than stainless steel chain.

These links are made of steel.

Twice as long as standard links, these are designed for use with Double-Pitch ANSI Roller Chain.

Keep an assortment of extra steel links on hand for maintenance and repairs. Assortments include connecting, adding, and adding-and-connecting links.

Made of stainless steel, this chain has excellent corrosion resistance.

Connect attachments to this metric chain without disassembling it. In addition to letting you add attachments with extension pins or rods for conveyance or elevation applications, the hollow pins on this chain weigh less than standard pins.

This acetal plastic chain is light, quiet, and nonconductive. Its links snap together, so you don't need connecting links.

Also known as captured guides, deep-channel guides prevent chain from slipping off track.

These guides align chain more precisely than open-channel guides.

Tighten the hex head screw with a wrench to remove chain pins without damaging side plates.

In addition to breaking chain, these tools can also rivet chain to increase strength for better performance on high-speed drives.

Place these plastic rulers on links to measure chain wear.

Use the notched jaws to push the spring-clip off the link.

Mount these tensioners directly onto your chain drive. They have adjustable straps that take up slack and apply constant tension.

Apply continuous tension and automatically take up slack at any point in a 180° arc.

Precisely apply tension in a straight line by moving the adjustment screw.

At less than 4" in height, these tensioners are good for use on low-clearance drives.