A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.

Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.

When the ratchet head becomes worn or damaged, change it out for a new one.

No need to pull the socket off the tool—push a button to release.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Bolts and threaded rod pass through these wrenches when used with bolt-through sockets.

Pivot the head to access fasteners in tight spots.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

Turn sockets from above when there's not room to swing a standard wrench handle.

Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.

No need to pull the socket off the tool—push a button to release.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Turn sockets from above when there's not room to swing a standard wrench handle.

These wrenches have an accuracy of ±2.0%.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.

Use these tools for general shop applications.

Make maximum contact with all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

The short bit on these sockets fits in spaces where height clearance is limited.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

These sockets are also known as pin-in-Torx bits.

These sockets are also known as Robertson bits.

Quickly position these sockets on square and external 8-point fasteners.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These short sockets fit spaces where height clearance is limited.

Pivot the head to access fasteners from an angle.

Designed to fit on external Torx-Plus fasteners, often found on pickup trucks, these sockets have squared lobes that resist slipping at high torque.

Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.

Grip the indentations around the outside of tri-groove fasteners.

Turn nuts on bolts and threaded rod, which pass through these sockets.

Pivot the head to access fasteners from an angle.

Pivot the head to access fasteners from an angle.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

A magnet holds the fastener securely enough to drive self-tapping screws.

With a smaller OD than standard sockets, these fit between tightly spaced fasteners.

Quickly position these sockets on square fasteners.

Tighten or loosen nuts and bolts without damaging the finish.

A magnet holds the fastener securely enough to drive self-tapping screws.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Suitable for occasional maintenance work, these sets are imported.

Pivot the head to access fasteners from an angle.

With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.

Grip the indentations around the outside of tri-groove fasteners.

Quickly position these sockets on square fasteners.

Lock your socket into the extension to prevent accidental disengagement..

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

Turn nuts on bolts and threaded rod, which pass through these sockets.

Attach to your socket for a longer reach.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

The short bit on these sockets fits in spaces where height clearance is limited.

These sockets are also known as pin-in-Torx bits.

Convert from one square drive size to another.

Attach to your socket for a longer reach.

Remove and install dual wheels on trucks and trailers with the sockets in these sets.

Pivot the head to access fasteners from an angle.

Pivot the head to access fasteners from an angle.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Set a desired torque within the range.

These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Turn sockets with a bit screwdriver.

Adapters are set to a specific torque and cannot be adjusted.

Convert from one square drive size to another.

A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench.

An insulated handle protects against accidental contact with live electrical circuits. These wrenches are tested to 1,000 volts to meet IEC 60900.

The 25° offset heads give you additional clearance to turn hard-to-reach fasteners.

An extra-long handle provides access to hard-to-reach fasteners and increases leverage.

Open the jaws to fit around a fastener like an open-end wrench; close the jaws and the wrench acts like a ratcheting box wrench.

Flip these wrenches over to ratchet in the opposite direction.

A spline-shaped box end turns spline, hex, and 12-point fasteners. This shape also gets a better grip on rounded fasteners that can be difficult to turn with a traditional wrench.

A lever reverses the ratchet direction.

Flip these wrenches over to ratchet in the opposite direction.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

A lever reverses the ratchet direction.

Suitable for occasional maintenance work, these sets are imported.

A ratchet mechanism in the head allows you to turn fasteners in tight spaces without removing and repositioning the wrench.

These tools deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material.

Drive screws four times faster than ratcheting alone. Grip the speed housing at the base of the shaft with one hand while turning the handle with the other. A magnet at the end of the shaft holds bits in place.

Attach a socket to the 1/4" square drive tip. These tools have a dial that shows how torque measurements change as you turn the driver. Use to fasten to a specific torque, determine fastener torque specifications, and identify the torque required to loosen tightened fasteners.

A ratchet mechanism turns fasteners more quickly than a standard bit driver. Insert a bit into the shaft and a magnet holds it in place.

Switch from internal to external threading with interchangeable tap and die adapters. Use them with the included ratcheting wrench.