Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These short sockets fit spaces where height clearance is limited.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.

Quickly position these sockets on square and external 8-point fasteners.

Also known as pipe plug sockets, these sockets have a square shape that provides the best possible grip on square fasteners and prevents rounding.

These sockets fit the nuts found on water and gas valves.

Grip the indentations around the outside of tri-groove fasteners.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

Extra-long bits allow access to hard-to-reach fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

These sockets are also known as pin-in-hex or pin-in-socket bits.

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

Make maximum contact with all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

A rubber insert grips the plug to prevent damage.

Turn nuts on bolts and threaded rod, which pass through these sockets.

A magnet holds the fastener securely enough to drive self-tapping screws.

Pivot the head to access fasteners from an angle.

Tighten or loosen nuts and bolts without damaging the finish.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Quickly position these sockets on square fasteners.

The square shape provides the best possible grip on square fasteners and prevents rounding.

Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.

A magnet holds the fastener securely enough to drive self-tapping screws.

For high quality at a lower price, choose these U.S.A.-made sets.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Suitable for occasional maintenance work, these sets are imported.

Pivot the head to access fasteners from an angle.

With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.

Grip the indentations around the outside of tri-groove fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

These sockets are also known as pin-in-hex or pin-in-socket bits.

Attach to your socket for a longer reach.

Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

Pivot the head to access fasteners from an angle.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Lock your socket into the extension to prevent accidental disengagement.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Push the square drive through the adapter to change size.

Extend your socket's reach.

Insulated to protect against accidental contact with live electrical circuits, these extensions are tested to 1,000 volts to meet IEC 60900.

Bend these extensions around obstructions to turn hard-to-reach fasteners.

Turn sockets with a bit screwdriver.

Pivot the head to access fasteners from an angle.

Adapters are set to a specific torque and cannot be adjusted.

Fit these adapters between your wrench and socket to enable finger tightening.

Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.

Bend these extensions around obstructions to access hard-to-reach fasteners.

A magnet holds the socket, making changes quicker.

Lock your socket into the extension to prevent accidental disengagement.

Pull the collar to quickly attach and remove sockets.

The handle is covered in rubber for a comfortable grip.

A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.

Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.

Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

No need to pull the socket off the tool—push a button to release.

Bolts and threaded rod pass through these wrenches when used with bolt-through sockets.

Turn sockets in the most confined spaces.

Extend the shaft for additional length.

The L shape provides clearance when reaching over obstructions.

The ratcheting mechanism turns sockets quickly.

Pivot the head to access fasteners in tight spots.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Trust the precision of your measurements—these wrenches are accurate to ±1%.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Measure with an accuracy of ±7%.

Turn sockets from above when there's not room to swing a standard wrench handle.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

Anchor these multipliers for added stability.

Built for durability, these high-performance tools handle the demands of high-volume production and tough maintenance applications.

Use these tools for general shop applications.

Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.

Hold different square drive sizes on the four clip rails stored in these trays.

The slots in these low-profile organizers are a different color than the base so it's clear when tools are missing from your bench top or drawer.

Magnets hold sockets securely in place.

Turn nuts on bolts and threaded rod, which can pass through the short end of the wrench. For additional leverage, slip a bar through the short end to create a T-handle.

These wrenches have one pivoting socket end and one open end.