Power through tasks that would be tedious with a manual driver. These screwdrivers tighten and loosen screws quickly and with minimal effort. They're ideal for repair shops and other high-volume jobs where efficiency is key. Charge the batteries to work in remote areas without power.

Loosen stuck fasteners and drive in fasteners with high force anywhere on your site. These impact wrenches run on a rechargeable battery, so you don’t need to be near an outlet to use them. Wrenches operate at full torque in the counterclockwise direction. The working torque range applies to the clockwise direction, often used for fastening. Use these wrenches with impact sockets only.

Some wrenches come with batteries and a charger. For others, batteries and chargers are sold separately.

Fasten screws in dimly-lit spaces without straining your eyes. LEDs light the tip of these screwdrivers to illuminate your work area. They are battery-powered to tighten and loosen screws quickly and with minimal effort. Snap one of the included bits into the shaft, and stow the others in the handle so you won't lose them.

A lithium ion (Li-Ion) battery powers these cordless drills, which means they weigh less and have a longer run-time than cordless drills that use nickel cadmium (NiCad) batteries. They have a variable speed motor—the further you depress the trigger, the faster the drill rotates.

See Batteries and Chargers for DeWalt Cordless Tools for replacement batteries and chargers.

Zip through tightening and loosening fasteners anywhere you need. These wrenches fit into tight spaces where corded or air-powered tools can't reach. Since they're powered, they're faster than manual ratchet wrenches. Designed for speed, the motor stops automatically when your fastener is tight. The ball-detent-style socket retainer keeps socket changes quick—just pull one socket off the retainer and push another one on. These wrenches operate at full torque in both clockwise and counterclockwise directions.

Test thread tolerance in seconds. A time-saver for high-volume work, these drivers quickly thread gauges in and out of holes for you—just pull the trigger. A green ring lights up to let you know your internal threads are within tolerance. If they're not, the gauge won't thread in fully. To avoid jamming, these drivers reverse gauges out of holes as powerfully as they thread them in. The pistol grip minimizes hand fatigue during long periods of use.

These drivers have two speeds to suit the job you need. The high speed works for most applications, while the lower speed is ideal for your largest thread sizes, or when you need more torque. Fine-tune torque even further with the included torque adjustment tool. These drivers come with two batteries, so you’ll never be attached to a cord or without power. Use one battery while charging the other.

A lithium ion (Li-Ion) battery (sold separately) powers these cordless drills, which means they weigh less and have a longer run-time than cordless drills that use nickel cadmium (NiCad) batteries.

Just twist the collar ring and these tools will change from a standard cordless drill to a hammer drill.

The rotary-only mode is for general purpose drilling and driving fasteners. Use this mode with standard drill bits for wood and metal as well as masonry drill bits. In rotary-percussion mode, the tool provides both a rotary drilling and hammering action. The hammering action pounds concrete and masonry, which breaks up the material while it drills. Use this mode for drilling masonry materials using carbide-tipped masonry drill bits.

This drill has a variable speed motor—the further you depress the trigger, the faster the drill rotates. They also have an adjustable clutch that lets you adjust the torque.

See Batteries and Chargers for Milwaukee Cordless Tools for replacement batteries and chargers.

Set the output current and dimming level on programmable LED drivers. Choose a programmer that matches the manufacturer series of your new driver.

Just twist the collar ring and this tool will change from a standard cordless drill to a hammer drill.

The rotary-only mode is for general purpose drilling and driving fasteners. Use this mode with standard drill bits for wood and metal as well as masonry drill bits. In rotary-percussion mode, the tool provides both a rotary drilling and hammering action. The hammering action pounds concrete and masonry, which breaks up the material while it drills. Use this mode for drilling masonry materials using carbide-tipped masonry drill bits.

This drill has a variable speed motor—the further you depress the trigger, the faster the drill rotates. The adjustable clutch lets you adjust the torque.

See Batteries and Chargers for DeWalt Cordless Tools for replacement batteries and chargers.

Switch between sockets and bits with these two-in-one tools to drive different types of fasteners with high force. Their versatility makes them ideal for use in the field for construction work and maintenance on heavy equipment. Socket changes are quick, thanks to the ring-style socket retainer—pull the socket off and push another one on. You won’t need to plug into a power source, since these wrenches run on a rechargeable battery. They connect via Bluetooth to a free downloadable app, Bosch Toolbox. From your tablet or smartphone, you can track your tool, customize settings, monitor usage, and get alerts for preventative maintenance.

Wrenches operate at full torque in the counterclockwise direction, which is most commonly used to break stuck fasteners free. The working torque range applies to the clockwise direction, which is commonly used for fastening. Use these tools with impact sockets and bits only.

Adjust the nosepiece on these screwdrivers to stop screws from sinking too deep. They're perfect for wood, fiberboard, drywall, and other soft materials that may crack if you overdrive the fastener. Power screwdrivers tighten and loosen screws quickly to tackle tasks that would be tedious with a manual driver. Charge the batteries to work in remote areas without power.

A powerful and durable hammer mechanism lets you drill deeper, larger holes in masonry and concrete in less time than with cordless hammer drills.

In rotary-percussion mode, the tool provides both a rotary drilling and hammering action. Use SDS-Plus shank drill bits for fast penetration into masonry materials. Note: SDS-Plus and SDS-Max bits are not interchangeable. Use the rotary-only mode for general purpose drilling and driving fasteners (requires a chuck adapter or a magnetic bit holder). In the percussion-only mode, the tool provides only the hammering action. Use this mode when working with chisels and other masonry tools (see Chisels for Rotary Hammers).

Just twist the collar ring and this tool will change from a standard cordless drill to a hammer drill.

The rotary-only mode is for general purpose drilling and driving fasteners. Use this mode with standard drill bits for wood and metal as well as masonry drill bits. In rotary-percussion mode, the tool provides both a rotary drilling and hammering action. The hammering action pounds concrete and masonry, which breaks up the material while it drills. Use this mode for drilling masonry materials using carbide-tipped masonry drill bits.

This drill has a variable speed motor—the further you depress the trigger, the faster the drill rotates. The adjustable clutch lets you adjust the torque.

A lithium ion (Li-Ion) battery (sold separately) powers these cordless drills, which means they weigh less and have a longer run-time than cordless drills that use nickel cadmium (NiCad) batteries.