Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

Push the bolt into the strike plate to secure doors, gates, and cabinets.

Slide the bolt and drop the knob into the notch to secure.

Pull the chain-grip to unlatch hard-to-reach doors and panels.

The strike has angled ends so these latches can accept their bolt even when doors become misaligned.

These padlockable latches are reversible for right- and left-hand mounting.

A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.

These padlockable latches are often used on 2" and 3" track to keep garage and other sectional overhead doors closed.

Choose these locks if you need several locks that open with the same key.

To provide more security than other master keyed deadbolt cabinet door locks, these locks have thicker bodies and longer bolts to resist prying.

To ensure the correct fit on your drawer, these locks include two latch bolts.

Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.

To ensure the correct fit on your drawer, these locks include two latch bolts.

To ensure the correct fit on your drawer, these locks include two latch bolts.

These strikes fit most deadbolt-style locks.

Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.

To provide more security than other master keyed deadbolt cabinet door locks, these locks have thicker bodies and longer bolts to resist prying.

Each of these cabinet locks opens with its own key.

Open multiple cabinet locks with the same key.

Choose these keyed alike locks if you need several that open with the same key.

Use these latches alone for single-point latching, or add latch kits for more holding power.

Use these latches alone for single-point latching or add latch kits for multiple-point latching and extra holding power.

The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.

In addition to being padlockable, these heavy duty latches come with two handles for access from the inside as well as the outside. They are often used on refrigerators and truck doors.

These latches are reversible for right- and left-hand mounting.

Latches snap shut when you push the bar in the strike plate to prevent accidental unlatching. Press the button on the strike plate to release the bar.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.

Latch and lock doors and cabinets these swing-handle cam locks, and unlock them with a four-number combination code.

Choose these cylinders if you need cylinders that each open with a different key.

This lock has a latch bolt to secure doors in the closed position.

Lock sliding windows in a closed position, or slightly open for ventilation.

Choose these locks if you need locks that each open with a different key.

Safeguard sliding doors in wire and chain link partitions.

Hold bathroom doors closed by swinging these latches into a notch in the strike plate.

The smooth ring handle on these pins won't catch on parts. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

For the tightest spaces, these narrow-grip pins have the smallest heads of any of our locking quick-release pins. They lock in place until you push the button to release the spring-loaded retaining balls.

These pins combine the locking capabilities of a clevis pin with the precision diameter of a dowel pin for a tight fit.

The low-profile head on these pins holds them in place on one side.

These pins have multiple through holes; change the length by moving the cotter pin. The bend makes them easy to insert and pull out.

The bend makes these pins easy to insert and pull out.

Install or remove these pins from either side. Slide a retaining ring into the groove for a secure hold that takes up less space than a cotter pin.

A swivel handle makes these pins easy to install and remove, while the toggle locks them in place. Flip the toggle to release the pin.

These one-piece fasteners lock in place with a toggle. Flip the toggle to release the pin.

Also known as double expansion anchors, these expand from both sides for full contact and a secure hold.

The fastest way to install shallow-hole female-threaded anchors. Just push the tip of the tool into the anchor and turn the tool with a power drill.

Also known as caulk-in anchors, these stay secure when there's not much material to hold.

Drive these tools with a hammer until the thicker portion of the tool makes contact with the anchor, causing it to expand.

More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water.

Install like a stud anchor—just thread the anchor, a nut, and a washer onto the end of a threaded rod, drive into a hole, and turn the nut to expand the base. Also known as rod anchors, they're often used with threaded rod to hang pipe and wiring.