Illuminate steps to reduce the risk of tripping or falling, especially at night or in poorly lit areas. They mount flush with your wall or step, so they won’t get snagged or bumped. A glass lens protects the LEDs from dust and damage. UL listed for wet locations, these lights are sealed to keep out humidity as well as dripping and splashed liquids.

Mount these lights in a standard 1-gang outlet box (not included) with the included mounting bracket.

Install wall-mount lights alongside the step. Install step-mount lights on the riser of the step.

For technical drawings and 3-D models, click on a part number.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. Use the switch on the power supply to choose between warm, cool, or neutral light—no more mismatched lights. All have passed strict U.S. and Canadian safety standards.

For technical drawings and 3-D models, click on a part number.

Mount lights in recessed spaces so the lens is flush with the wall. These fixtures are ETL and C-ETL listed for Class I, Division 2, Groups A, B, C, and D; and Class II, Division 2, Groups F and G for use where ignitable concentrations of hazardous material occur infrequently, such as in the case of an accidental spill or failure of a ventilation system. They withstand acetylene, hydrogen, ethylene, propane, carbonaceous dusts, and nonconductive dusts. These lights are often used in freestanding buildings, such as paint spray booths, so the back opens like a door for changing light bulbs from the outside. They can be hardwired to operate on any of the voltages listed. They work with tubular fluorescent bulbs (sold separately).

To keep contaminants from entering your clean room, these lights seal against drop ceilings with an airtight gasket. They’re also covered in an antimicrobial paint and are fully enclosed. What makes them great for clean rooms also makes them great for washdowns and food preparation areas. They’re rated NSF/ANSI 2 for splash zones, so you can use them around splashing liquids from food. Rated IP65, they’re sealed against humidity and low-pressure washdowns. You can install these IC-rated lights in direct contact with insulation without risking a fire. Their lens disperses light evenly.

ISO class 3 lights have a prismatic lens that casts a beam that covers a wider area and limits glare better than lights with a smooth lens. If you don’t have a drop ceiling, no problem—these lights will also install into any finished ceiling opening with the built-in clamping arms.

Neutral lights are often used in workspaces. Cool lights highlight white and blue tones for higher visibility than neutral lights.