Steel Drum Head Cutters
Remove the top from a steel drum leaving a clean edge and lip. The drum can then be used with Steel Drum Covers. Also known as drum deheaders, these cutters are for occasional use. Turn the knob to clamp the cutter onto a drum, then push down and pull up on the handle to cut around the head.
Copper is nonsparking for use with flammable materials.
Easy-Cut Steel Drum Head Cutters
This cutter uses ratchet action to provide more force with less effort. Also known as a drum deheader, it leaves a clean edge and lip for use with steel drum covers. Clamp the cutter onto your drum lip, then move the handle up and down to cut.
Electric Steel Drum Head Cutters
For intermittent use, these drum head cutters can remove the heads from up to 10 drums per day. A quiet motor propels a round blade leaving a clean edge. The drum is then ready for use with steel drum covers. These cutters are also known as drum deheaders.
Drum Capacity, gal. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. | Max. | For Max. Drum Lip Thick., ga. | Blade Material | Material | Ht. | Wd. | Dp. | Power, hp | Voltage | Cord Lg. | Plug Type | Each | |
30 | 55 | 16 | Steel | Aluminum, Steel | 24" | 10" | 12" | 1/8 | 115V AC | 31 1/2" | Three Prong | 00000000 | 000000000 |
Heavy Duty Electric Steel Drum Head Cutters
Choose these cutters for continuous use. A quiet motor propels a round blade leaving a clean edge. The drum is then ready for use with Steel Drum Covers. These cutters are also known as drum deheaders.
Drum Capacity, gal. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. | Max. | For Max. Drum Lip Thick., ga. | Blade Material | Material | Ht. | Wd. | Dp. | Power, hp | Voltage | Cord Lg. | Plug Type | Each | |
30 | 55 | 16 | Steel | Aluminum, Steel | 25" | 11" | 17" | 1/3 | 110V AC | 31 1/2" | Three Prong | 0000000 | 000000000 |
Air-Powered Steel Drum Head Cutters
Make fast cuts without manual effort. Unlike Electric Steel Drum Head Cutters, this is for use in areas where work surfaces are wet. Nonmarring rollers guide the cutter around the head leaving a clean edge and lip for use with steel drum covers. This cutter is for continuous use. It's also known as a drum deheader.
Drum Capacity, gal. | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. | Max. | For Max. Drum Lip Thick., ga. | Blade Material | Material | Ht. | Wd. | Dp. | Air Pressure, psi | Air Consumption, cfm | For Air Hose ID | Air Hose Included | Thread Type | Pipe Size | Gender | Each | |
30 | 55 | 16 | Steel | Aluminum, Steel | 25" | 11" | 17" | 60-100 | 25 | 1/2" | No | NPT | 1/4 | Male | 0000000 | 000000000 |