Filter by
For Use On
Consistency
Manufacturer
Container Type
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Water-Resistant Surface Filler Kits
West System 105K
 |
Includes | Formulation | Consistency | For Use Outdoors | Temp. Range, ° F | Process After Hardening | For Use On | Each | ||
|---|---|---|---|---|---|---|---|---|---|
| 8 One-Time-Use Packets of 101-TS Two-Part Epoxy Filler 0.1-oz. 406 Collodial Silica Filler 0.1-oz. 410 Low-Density Filler Two Brushes Reusable Mixing Stick Three Mixing Cups 15" × 15" Fiberglass Cloth Syringe Dispenser Three Pairs of Disposable Gloves | Epoxy | Thin Liquid | Yes | 35 to 130 | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, ABS, PVC, Fiberglass, Wood | 7480A51 | 000000 |
Drum Patches
Surface Filler Patches
 |
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Temp. Range, ° F | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Type | Lg. | Wd. | Begins to Harden, min. | Reaches Full Strength | Mixing Req. | Mix Ratio | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||
Devcon Zip Patch™ | |||||||||||||||||
| 11500 | Patch | 4" | 9" | 5 | 4 hr. | No | — | Yes | -40 | 200 | Brown | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Fiberglass, Wood | 7790A21 | 0000000 | ||
Epoxy Surface Fillers | |||||||||||||||||
| — | Patch | 4" | 6" | 1 | 30 min. | Yes | 1:1 | Yes | — | 425 | Clear | Sand | Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, SBR, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood | 74645A79 | 00000 | ||
Surface Fillers
 |
Polyester Plastic Tube |
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | Temp. Range, ° F | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||
Polyester Plastic Surface Fillers | ||||||||||||||||||
| 8 | Tube | 15 | 3 | Paste | Yes | 50:1 | Not Rated | 1/2" | Yes | -40 | 180 | Varies | Sand | Fiberglass | 7597A35 | 000000 | ||
High-Strength Acrylic Structural Adhesives
 |
Single-Use Packet |
With excellent shear strength, these form stronger bonds than our standard acrylic structural adhesives.
Acrylics bond with a wider range of materials than any other adhesive. They adhere to plastic especially well, requiring little surface preparation.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Strength | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Each | |||
| Single-Use Packet | 30 | 24 | 4,400 | 21 | 8:1 | Thick Liquid | 37,220 | -65 to 250 | Metal, Plastic, Rubber | 8310T12 | 000000 | ||
Leak-Repair Patches for Metal
 |
Seal leaks around small holes. Apply adhesive (sold separately) to the center of the patch and press the center of the patch until it clicks. Patches come attached to a fixture that applies continuous pressure while the adhesive cures.
Temp. Range | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Material | Container Type | Mixing Req. | Dia. | Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||
Surface Fillers | ||||||||||||||
| Aluminum | Patch | No | 5/8" | 0.005" | Yes | Not Rated | Not Rated | Aluminum | Machine, Drill, Saw | Aluminum | 6939T3 | 000000 | ||
| Aluminum | Patch | No | 1 1/4" | 0.005" | Yes | Not Rated | Not Rated | Aluminum | Machine, Drill, Saw | Aluminum | 6939T1 | 00000 | ||
| Aluminum | Patch | No | 2" | 0.032" | Yes | Not Rated | Not Rated | Aluminum | Machine, Drill, Saw | Aluminum | 6939T4 | 00000 | ||
| 316 Stainless Steel | Patch | No | 2" | 0.09" | Yes | Not Rated | Not Rated | Steel | Machine, Drill, Saw | Stainless Steel | 6939T6 | 00000 | ||
Spin-Weld LDPE Tank Patches
 |  |
Repair holes in LDPE tanks and containers with these patches. As you spin these patches with a handheld electric router, they melt into the surface of your tank for a seal without any joints. To hold these patches in your router, you’ll need the installation tool (sold separately).
For proper installation, you’ll want to use a hole saw to drill a hole that matches the For Hole Diameter listed and check that your router meets the speed and power requirements shown in the table.
