Thread these mixers into a drum opening for a secure connection. The propeller is collapsible to fit through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid. Also known as a direct-drive mixer, it operates at high speeds for rapid turnover. Use it to mix liquids with a viscosity similar to water and light oils. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing. Motor is totally enclosed fan cooled (TEFC) for use in environments with splashing water and dust.

Motor is UL listed for use in environments with flammable gases and combustible dust. Attach this mixer to the lip of a drum. The propeller is collapsible to fit through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid. Also known as a direct-drive mixer, it operates at high speeds for rapid turnover. Use it to mix liquids with a viscosity similar to water and light oils. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.

For reduced vibration and noise, these mixers have a clamp in addition to the thread-in connection. Propellers are collapsible to fit through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid. Also known as direct-drive mixers, they operate at high speeds for rapid turnover. Use them to mix liquids as thin as water or as thick as molasses. Adjust mixing speed with the needle valve. Mixers have four propellers for fast and thorough mixing. Propellers are left hand and move clockwise when viewed from above to direct flow downward for efficient mixing.

Thread these mixers into a drum opening for a secure connection. All of the propellers are left hand and move clockwise when viewed from above to direct flow downward for efficient mixing. Adjust the mixing speed with a needle valve.

These mixers have collapsible propellers that fit through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid. Also known as direct-drive mixers, they operate at high speeds for rapid turnover. Use them to mix liquids with a viscosity similar to water and light oils. Adjust mixing speed with a needle valve. Propellers are left hand and move clockwise when viewed from above to direct flow downward for efficient mixing.

Motor is UL listed for use in environments with flammable gases and combustible dust. This mixer eliminates spills and splatter by rotating your closed drum to mix its contents.

Eliminate spills and splatter by rotating your closed drum to mix its contents. Motor is totally enclosed fan cooled (TEFC) for use in environments with splashing water and dust.

Use this mixer to dilute coolants and soluble oils with water. It dispenses solution directly from your drum in a measured ratio. Attach your water line to the inlet and set your desired mixing ratio with the regulator knob. The water line connection has a quarter-turn shutoff valve.

Dilute concentrated detergents and sanitizers. This mixer dispenses solution directly from your drum in a measured ratio. Attach your water line to the inlet and set your desired mixing ratio with the regulator knob. The water line connection has a quarter-turn shutoff valve.

Motor is UL listed for use in environments with flammable gases and combustible dust. Screw this mixer into the opening of a drum. The propeller is collapsible to fit through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid. Also known as a direct-drive mixer, it operates at high speeds for rapid turnover. Use it to mix liquids with a viscosity similar to water and light oils. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.

This paddle contains a compound that can be sensed by metal detectors. It is made from FDA-listed polypropylene for use in food and beverage applications.

Roll this mixer where you need it. For easy dispensing, it has an open-top mixing drum that tilts downward to unload material.

Dilute concentrated detergents and sanitizers. This mixer dispenses solution directly from your drum in a measured ratio. Attach your water line to the inlet and set your desired mixing ratio with the metering screw. The water line connection has a quarter-turn shutoff valve.

Use these mixers to dilute coolants and soluble oils with water. They dispense solution directly from your drum in a measured ratio. Attach your water line to the inlet and set your desired mixing ratio with the needle valve. The water line connection has a quarter-turn shutoff valve.

A removable polyethylene liner with molded-in blades allows for easy cleaning. Stand is stationary. This mixer has an open-top mixing drum that tilts downward to unload material.

Mix and stir food and other material in hygienic environments with these paddles—they’re easy to clean and won’t corrode from frequent washdowns with harsh cleaners. You can also use them as scrapers.

Clamp the 10" long bar of these mixers onto the vertical shaft of a stand (sold separately). A needle valve lets you adjust mixing speed. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.