For easy cleaning, these pumps have a sanitary quick-clamp discharge connection. They're made of FDA listed materials for use with food, water, and beverage.

Often used with ammonia, etching and cleaning solutions, and other caustics, these pumps have a nonsparking air-powered motor for applications where electricity is unavailable or dangerous.

These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone, xylene, and mineral spirits.

Use these pumps to move lubricating oil such as hydraulic and motor oil.

Pump fuel such as gasoline, kerosene, and diesel fuel.

Use these pumps with fuel and flammable liquids, such as acetone, ethanol, and gasoline. They handle nearly twice the amount of pressure as other air-powered drum pumps to move high-viscosity liquids.

The polypropylene housing provides good resistance to caustics such as ammonia, electropolishing solutions, and detergents and cleaning fluids.

Rotate the handle to dispense a continuous flow of liquid.

Push the plunger to pump water, cleaners, and chemicals.

These pumps have a selectable flow rate, so you can adjust flow for different dispensing applications. A lever handle maximizes output with each stroke for low-effort dispensing.

A lever handle maximizes output with each stroke for low-effort dispensing.

Extract water from valve boxes, meter pits, and other small spaces.

Use these pumps to move lubricating oil, such as hydraulic and motor oil.

Remove liquid from hard‐to‐reach areas with a long, flexible intake tube that extends into deep and hard‐to-access tanks.

For low‐effort dispensing, a lever handle maximizes output with each stroke. The handle delivers fluid on both the forward and backward strokes to quickly move drum contents.

Rotate the handle to dispense a continuous flow of liquid.

These pumps have a discharge hose for transfer applications and a vacuum breaker that drains the hose to prevent siphoning. A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps.

For low-effort dispensing, these pumps have a lever handle that maximizes output with each stroke. Use them to pump lubricating oil, such as motor oil.

Including nozzles and connectors, these pumps come with everything you need to start pumping.

These pumps quickly empty drum contents by moving 48 gallons of liquid per minute. Their electric motors are UL listed for use in environments with flammable gases and combustible dust.

Designed to move 40 gallons of liquid per minute, these pumps quickly empty drum contents.

Attach these pumps to any 12-volt battery for on-site diesel fuel dispensing at construction sites, on boats, and in other environments without electrical hookups.

These pumps are C-UL listed for use in environments with flammable gases and combustible dust. Operating on a 12-volt battery, use them to transfer and drain fuel such as gasoline, diesel fuel, and kerosene.

Quickly generate suction with battery power.

Made of PVDF components, these pumps resist harsh chemicals such as hydrochloric acid and sulfuric acid. They have a foot pedal for hands-free operation.

Thread these mixers into a drum opening for a secure connection.

Motors are UL listed for use in environments with flammable gases and combustible dust.

For reduced vibration and noise, these mixers have a clamp in addition to the thread-in connection.

Mix and stir food and other material in hygienic environments with these paddles—they’re easy to clean and won’t corrode from frequent washdowns with harsh cleaners.

Extract samples of thick liquids, such as oil, with a maximum viscosity of 100 cP.

These samplers are cleaned and bagged in a Class 7 clean room. Each bag is marked with a lot number. Use these samplers to extract thick liquids, such as oil, with a maximum viscosity of 100 cP.

Toss these samplers after you collect and transfer liquid samples—they’re disposable to reduce the risk of cross contamination.

Lower these samplers into large tanks with a chain or cable to collect samples from the bottom. They are also known as bomb samplers.