About Sanding Abrasives
More
Drum Faucets with Liquid-Level Gauge
The gauge provides an instant visual check of liquid levels in your drum without interfering with the use of the faucet.
Inlet | ||||||||
|---|---|---|---|---|---|---|---|---|
| Wetted Parts Material | Pipe Size | Gender | Outlet OD | Max. Temp., °F | Lock Type | For Max. Shackle Dia. | Each | |
Brass | ||||||||
| Aluminum, Brass, Buna-N Rubber, Glass, Zinc-Plated Iron | 3/4 NPT | Male | 7/8" | 225° | Padlockable | 9/32" | 000000 | 0000000 |
Metal Drum Faucets
All of these faucets are primarily used on drums, but can also be used on tanks, carboys, and other containers. If your drum has a 2" Buttress or Mauser thread, use drum thread adapters to attach drum faucets with pipe size 2 NPT threads.
Food Industry Round Metal Batch Cans
These metal batch cans meet NSF/ANSI 2 standards for food-processing equipment.
Batch Cans | Lids | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Dia. | Ht. | Bottom ID | Gauge | Appearance | Specifications Met | Each | Lid Type | Each | ||
Aluminum  | |||||||||||
| 2 1/2 gal. | 10" | 7 5/8" | 8 3/4" | 8 | Dull | NSF/ANSI 2 | 0000000 | 000000 | __ | 0000000 | 000000 |
| 5 gal. | 12" | 10 1/2" | 10 3/4" | 8 | Dull | NSF/ANSI 2 | 0000000 | 000000 | Loose Fitting | 0000000 | 00000 |
| 6 gal. | 12" | 12 3/8" | 10 3/4" | 8 | Dull | NSF/ANSI 2 | 0000000 | 000000 | Loose Fitting | 0000000 | 00000 |
| 10 gal. | 14" | 15" | 12 1/4" | 8 | Dull | NSF/ANSI 2 | 0000000 | 000000 | Loose Fitting | 0000000 | 00000 |
| 15 gal. | 16" | 17 1/2" | 14 1/4" | 6 | Dull | NSF/ANSI 2 | 0000000 | 000000 | Loose Fitting | 0000000 | 00000 |
Drum Sanders
Often used in woodworking shops to efficiently level and prep boards for paneling, these sanders create a smooth, even finish on large, flat surfaces. To create this consistent finish, the wide rotating drum and conveyor keep your material in steady contact with the abrasive. The drum is made of aluminum to prevent heat from building up and wearing down the sandpaper or burning your panels. Easy to adjust, all it takes is a turn of the dial to align the drum and conveyor. These sanders have a port to connect to a dust collector or vacuum system to keep your workspace clean and reduce clogs. Sanding sheets are sold separately.
These sanders are open on one end to make room for your workpiece to hang out when you’re sanding a piece that’s wider than the drum length. Maximum workpiece width assumes you’ll flip your workpiece around to take two passes through these sanders.
Sanders with a 10" drum are sized to fit comfortably on your workbench.
Sanders with a 19" drum come with a stand. They automatically adjust the conveyor speed based on the weight of your workpiece to prevent burning or gouging the surface. This also helps you create a consistent finish if your workpiece has varying densities. They automatically tension the sanding sheet as you wrap it around the drum and help you make sure the sheet overlaps correctly. A lock holds the drum at the height you’ve set.
For Max. Workpiece | Drum | Table | No-Load Speed | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Lg. | Dia. | Material | Wd. | Lg. | Min. | Max. | No. of Speeds | Voltage | Current, A | Motor Speed, rpm | hp | Phase | Includes | Features | Each | |
| 20" | 3" | 10" | 5" | Aluminum | 10" | 15" | 0 fpm | 10 fpm | Variable | 120V AC | 8 | 1,720 | 1 | Single | __ | Dust Extraction Port | 00000000 | 000000000 |
| 38" | 4" | 19" | 5" | Aluminum | 22 1/2" | 22 1/2" | 0 fpm | 10 fpm | Variable | 120V AC | 15 | 1,740 | 1 3/4 | Single | Steel Stand | Dust Extraction Port | 00000000 | 00000000 |
Also known as abrasive wraps, these sheets are cut to fit around the drum of a drum sander. They’re coated with aluminum oxide, the most common abrasive for general use. Tough and fracture resistant, it’s often used to smooth wood and metal.
For 10" Drum Lg. | For 19" Drum Lg. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
For Rough Finish | |||||||||
| 36 | Steel, Wood | Aluminum Oxide | Paper | __ | 000000 | 00 | 3 | 00000000 | 000000 |
| 60 | Steel, Wood | Aluminum Oxide | Paper | 6 | 00000000 | 000000 | 3 | 00000000 | 00000 |
| 80 | Steel, Wood | Aluminum Oxide | Paper | 6 | 00000000 | 00000 | 3 | 00000000 | 00000 |
For Smooth Finish | |||||||||
| 100 | Steel, Wood | Aluminum Oxide | Paper | 6 | 00000000 | 00000 | 3 | 00000000 | 00000 |
| 120 | Steel, Wood | Aluminum Oxide | Paper | 6 | 00000000 | 00000 | 3 | 00000000 | 00000 |
| 150 | Steel, Wood | Aluminum Oxide | Paper | 6 | 00000000 | 00000 | 3 | 00000000 | 00000 |
| 180 | Steel, Wood | Aluminum Oxide | Paper | 6 | 00000000 | 00000 | 3 | 00000000 | 00000 |
| 220 | Steel, Wood | Aluminum Oxide | Paper | 6 | 00000000 | 00000 | 3 | 00000000 | 00000 |
Chemical Hose Nozzles with Hose and Cam-and-Groove Fittings
Dispense chemicals from a line that attaches and detaches from your drum or intermediate bulk container (IBC) in seconds. These nozzles and the included hose come with fittings that connect when you insert the plug into the socket and push the levers down. To resist corroding from citric acid, ethanol, and other chemicals, these nozzles are made of either polypropylene or aluminum and the hose is PVC. These nozzles are not designed for pressurized systems and should be used in applications where liquid can flow by gravity. Use the trigger to adjust how much they dispense at a time. These nozzles swivel to make directing the flow easier. Hook the included bracket onto the top of a drum or tank to hang the hose when not in use.
Aluminum nozzles resist wear and tear better than polypropylene nozzles.
Spout | Hose | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate, gpm | Coupling Size | Socket ID | Connection | Max. Pressure | Temp. Range, °F | OD | Lg. | Fitting Material | Shut-Off Type | ID | OD | Bend Radius | Lg., ft. | Material | Includes | Each | |
Aluminum Nozzles | |||||||||||||||||
For Use With Carbon Dioxide, Citric Acid, Coolant, Diesel Fuel, Ethanol, Ethyl Alcohol, Isopropyl Alcohol, Mineral Oil, Mineral Spirits | |||||||||||||||||
| 10 | 2 | 2 1/2" | Cam-and-Groove Female Socket | 150 psi @ 72° F | 25° to 150° | 1" | 6" | Polypropylene Plastic | Manual | 1" | 1 5/16" | 4" | 8 | PVC Plastic | Mounting Bracket | 0000000 | 0000000 |