McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    55 Products

    Quick-Disconnect Duct and Fittings

    Image of System. Front orientation. Exploded view. Duct and Fittings. Quick-Disconnect Duct and Fittings.
    The fastest ductwork to disassemble for dust collection and other frequently cleaned systems. Join sections with quick-release clamps that open and close with a flip of the latch. Since you don’t need screws, welds, or tools, the installation time is half that of other duct types.
    Duct
    Image of Product. Front orientation. Duct and Fittings. Quick-Disconnect Duct and Fittings, Duct.
    Pair with compatible fittings and accessories.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    Lg.
    Ga.
    Each
    2221 7/8"58 3/4"20000000000000000
     
    Duct with Access Panel
    Image of Product. Front orientation. Duct and Fittings. Quick-Disconnect Duct and Fittings, Duct with Access Panel.
    No need to cut a hole and install a door—just slide the built-in panel to get inside this duct for cleaning and inspection.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Opening
    Galvanized Steel
    Duct
    Size
    ID
    Lg.
    Wd.
    Lg.
    Ga.
    Each
    2222"58 3/4"7"14"20000000000000000
     
    Adjustment Sleeves
    Image of Product. Front orientation. Duct and Fittings. Quick-Disconnect Duct and Fittings, Adjustment Sleeves.
    Close gaps between sections of duct without disassembling the whole line. To install these sleeves, cut the end of your duct and place the O-ring on the cut piece. Then, slide the sleeve on and clamp in place.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Duct Adjustment Sleeves
    Replacement
    O-Rings
    Galvanized Steel
    Duct
    Size
    ID
    Max. Sleeve
    Extension
    Ga.
    Each
    Each
    2222"7"200000000000000000000000000000
     
    Clamps
    Image of Product. Front orientation. Duct and Fittings. Quick-Disconnect Duct and Fittings, Clamps.
    Close these clamps around duct and fittings to connect them. Open to separate sections for cleanout and changes. The rubber seal prevents leaks and a locking pin keeps clamps closed.
    Galvanized Steel—Use these rust-resistant and affordable clamps with galvanized steel duct.
    Galvanized Steel
    Duct
    Size
    Each
    2200000000000000
     
    90° Elbow Connectors
    Image of Product. Front orientation. Duct and Fittings. Quick-Disconnect Duct and Fittings, 90° Elbow Connectors.
    Change the direction of airflow when joining lengths of duct.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    Ga.
    Each
    2221 7/8"20000000000000000
    2222"1400000000000000
     
    45° Elbow Connectors
    Image of Product. Front orientation. Duct and Fittings. Quick-Disconnect Duct and Fittings, 45° Elbow Connectors.
    Change the direction of airflow when joining lengths of duct.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    Ga.
    Each
    2221 7/8"20000000000000000
    2222"1400000000000000
     
    30° Elbow Connectors
    Image of Product. Front orientation. Duct and Fittings. Quick-Disconnect Duct and Fittings, 30° Elbow Connectors.
    Change the direction of airflow when joining lengths of duct.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    Ga.
    Each
    2222"20000000000000000
     
    Tee Connectors
    Image of Product. Front orientation. Duct and Fittings. Quick-Disconnect Duct and Fittings, Tee Connectors.
    Split or merge airflow paths.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    Ga.
    Each
    2221 7/8"20000000000000000
     
    90° Wye Connectors
    Image of Product. Front orientation. Duct and Fittings. Quick-Disconnect Duct and Fittings, 90° Wye Connectors.
    Split or merge airflow more gradually than tees. With less abrupt changes in direction, wyes reduce turbulence for smoother flow.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    Ga.
    Each
    2222"20000000000000000
     
    45° Wye Connectors
    Image of Product. Front orientation. Duct and Fittings. Quick-Disconnect Duct and Fittings, 45° Wye Connectors.
    Split or merge airflow more gradually than tees. With less abrupt changes in direction, wyes reduce turbulence for smoother flow.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    Ga.
    Each
    2221 7/8"20000000000000000
     
    Straight Reducers
    Image of Product. Front orientation. Contains Annotated. Duct and Fittings. Quick-Disconnect Duct and Fittings, Straight Reducers.
    Transition between duct of different diameters. Reducers also join larger duct with smaller duct that connects to equipment.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Duct
    Size
    ID
    Galvanized Steel
    (A)
    (B)
    (A)
    (B)
    Ga.
    Each
    222022"19 15/16"20000000000000000
    242223 15/16"22"2000000000000000
     
    Straight Adapters
    Image of Product. Front orientation. Duct and Fittings. Quick-Disconnect Duct and Fittings, Straight Adapters, Duct-to-Duct Adapter.

    Duct-to-Duct

    Adapter

    Image of Product. Front orientation. Duct and Fittings. Quick-Disconnect Duct and Fittings, Straight Adapters, Duct-to-Duct Flanged Adapter.

    Duct-to-Duct

    Flanged

    Adapter

    Image of Product. Front orientation. Duct and Fittings. Quick-Disconnect Duct and Fittings, Straight Adapters, Duct-to-Hose Adapter.

    Duct-to-Hose

    Adapter

    Bridge the gap between quick disconnect and other types of duct. These adapters mate with standard and spiral round duct, flanged duct fittings, or duct hose.
    Duct-to-Duct Adapter—Transition from quick-disconnect duct to standard and spiral duct.
    Duct-to-Duct Flanged Adapter—The flange joins quick-disconnect duct to fittings that have a flanged connection.
    Duct-to-Hose Adapter—Attach duct hose to the beaded end of these adapters and secure with a hose clamp.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    Ga.
    Each
    Duct-to-Duct Adapter
    2222"2000000000000000
     
    Duct-to-Duct Flanged Adapter
    2222"2000000000000000
     
    Duct-to-Hose Adapter
    2222"200000000000000
     
    30° Wye Saddles
    Image of Product. Front orientation. Contains Annotated. Duct and Fittings. Quick-Disconnect Duct and Fittings, 30° Wye Saddles.
    A more gradual change of direction than tees, wye saddles add onto existing ductwork without disassembling it. Cut a hole in your duct and then install the saddle over the opening.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Duct
    Size
    Galvanized Steel
    (A)
    (B)
    ID
    Ga.
    Each
    202219 15/16"20000000000000000
    222422"2000000000000000
     
    End Caps
    Image of Product. Front orientation. Duct and Fittings. Quick-Disconnect Duct and Fittings, End Caps.
    Cover unused duct openings to prevent air from leaking, dust from escaping, and debris from entering. End caps are often used to seal duct after changes to your system or equipment. To make modifications or expand your line, remove the cap.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    Ga.
    Each
    2221 7/8"2000000000000000
     
    Duct Airflow Dampers
    Image of Product. Front orientation. Duct Airflow Dampers. Clamp-Together Duct.
    Turn the lever to adjust airflow.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    Overall
    Lg.
    Ga.
    Each
    Standard Airflow Damper
    2222 1/8"23"20000000000000000
     
    Duct Blast Gates
    Image of Product. Front orientation. Duct Blast Gates. Clamp-Together Duct.
    Open and close the slide to control airflow to sections of duct. Blast gates turn flow on or off.
    Aluminum with Galvanized Steel Slide—The body is aluminum to reduce stress on your duct and the slide is galvanized steel for strength. Both components resist rust in wet environments.
    Overall
    Duct
    Size
    ID
    Wd.
    Ht.
    Dp.
    Each
    Aluminum with Galvanized Steel Slide
    2222"24 5/8"45 3/4"9 1/8"000000000000000
     
    Duct Noise Reducers
    Image of Product. Front orientation. Duct Noise Reducers. Clamp-Together Duct.
    Muffle noise from high-velocity airflow and fans, blowers, and dust collectors. These reducers are insulated to cut sound levels in your facility by 25%.
    Galvanized Steel—Strong and corrosion resistant, galvanized steel is the most commonly used ductwork material.
    Overall
    Galvanized Steel
    Duct
    Size
    ID
    Dia.
    Lg.
    Sound
    Absorbed
    Ga.
    Each
    2222"34 1/8"64"25%2000000000000000000

    Standard Duct and Fittings

    Image of System. Front orientation. Exploded view. Duct and Fittings. Standard Duct and Fittings.
    Deliver air for a range of HVAC applications, including exhaust and dust collection. Our basic duct, the round shape creates smoother, more efficient airflow than rectangular and oval duct. The male end is slightly smaller than the female, so sections join without clamps or tools.
    Duct
    Image of Product. Front orientation. Duct and Fittings. Standard Duct and Fittings, Duct, Open Duct.

    Open Duct

    Image of Product. Front orientation. Duct and Fittings. Standard Duct and Fittings, Duct, Closed Duct.

    Closed Duct

    Pair with compatible fittings and accessories.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Open Duct—Easier to cut with snips than closed duct, so it’s good for repairing or retrofitting an existing system. Snap the seams together by hand—no tools required.
    Closed Duct—With a closed seam, this duct is stronger and less prone to air leaks than open duct. However, it’s not as quick to modify when installing.
    2 ft. Long
    5 ft. Long
    Duct
    Size
    ID
    OD
    Ga.
    Each
    Each
    Galvanized Steel
     
    Open Duct
    2222"21 7/8"240000000000000———0
     
    Closed Duct
    2222"21 7/8"24———0000000000000000
     
    90° Elbow Connectors
    Image of Product. Front orientation. Duct and Fittings. Standard Duct and Fittings, 90° Elbow Connectors.
    Change the direction of airflow when joining lengths of duct.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    OD
    Seam
    Construction
    Ga.
    Each
    2222"21 7/8"Welded20000000000000000
     
    45° Elbow Connectors
    Image of Product. Front orientation. Duct and Fittings. Standard Duct and Fittings, 45° Elbow Connectors, Riveted Seam.

    Riveted Seam

    Change the direction of airflow when joining lengths of duct.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    OD
    Seam
    Construction
    Ga.
    Each
    2222"21 7/8"Riveted24000000000000000
     
    Straight Connectors
    Image of Product. Front orientation. Duct and Fittings. Standard Duct and Fittings, Straight Connectors.
    Join two lengths of duct.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    Ga.
    Each
    2222"2600000000000000
     
    Tee Connectors
    Image of Product. Front orientation. Duct and Fittings. Standard Duct and Fittings, Tee Connectors, Female × Female × Male.

    Female × Female × Male

    Split or merge airflow paths.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    OD
    Ga.
    Each
    Female × Female × Male
    2222"21 7/8"22000000000000000
     
    Straight Reducers
    Image of Product. Front orientation. Contains Annotated. Duct and Fittings. Standard Duct and Fittings, Straight Reducers, Female × Male.
    Image of Product. Front orientation. Contains Annotated. Duct and Fittings. Standard Duct and Fittings, Straight Reducers, Male × Female.

    Female × Male

    Male × Female

    Transition between duct of different diameters. Reducers also join larger duct with smaller duct that connects to equipment.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Duct
    Size
    ID
    OD
    Galvanized Steel
    (A)
    (B)
    (A)
    (B)
    (A)
    (B)
    Ga.
    Each
    Female × Male
    221822"——17 7/8"24000000000000000
     
    Male × Female
    2220—20"21 15/16"—240000000000000
    2422—22"23 15/16"—240000000000000
     
    End Caps
    Image of Product. Front orientation. Duct and Fittings. Standard Duct and Fittings, End Caps, Male.

    Male

    Image of Product. Front orientation. Duct and Fittings. Standard Duct and Fittings, End Caps, Female.

    Female

    Cover unused duct openings to prevent air from leaking, dust from escaping, and debris from entering. End caps are often used to seal duct after changes to your system or equipment. To make modifications or expand your line, remove the cap.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    OD
    Ga.
    Each
    Male
    22—21 7/8"2400000000000000
     
    Female
    2222"—240000000000000
     
    Duct Airflow Dampers
    Image of Product. Front orientation. Duct Airflow Dampers. Standard Duct and Fittings, Standard Airflow Damper, Male.

    Standard

    Airflow

    Damper, Male

    Turn the lever to adjust airflow.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    OD
    Overall
    Lg.
    Ga.
    Each
    Standard Airflow Damper
     
    Male
    2221 3/4"4 1/2"18000000000000000
     
    Duct Damper Handles
    Image of Product. Front orientation. Duct Damper Handles. Standard Duct and Fittings.
    Pair with your own blade to create an economical damper for existing duct.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    For Max. Damper
    Blade Thk.
    Each
    0.022"000000000000

    Spiral Duct and Fittings

    Image of System. Front orientation. Contains MultipleImages. Duct and Fittings. Spiral Duct and Fittings.
    Reinforced with a continuous seam, this duct keeps its shape, even against suction from dust collection systems. On the inside, duct is smooth for efficient airflow. Because of its attractive look, spiral duct is often used for exposed heating and cooling systems.
    Duct
    Image of Product. Front orientation. Duct and Fittings. Spiral Duct and Fittings, Duct.
    Pair with compatible fittings and accessories.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    2 ft. Long
    5 ft. Long
    Duct
    Size
    ID
    Ga.
    Each
    Each
    Galvanized Steel
    2222"2400000000000000000000000000000
     
    90° Elbow Connectors
    Image of Product. Front orientation. Duct and Fittings. Spiral Duct and Fittings, 90° Elbow Connectors.
    Change the direction of airflow when joining lengths of duct.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    OD
    Ga.
    Each
    2221 7/8"22000000000000000
    45° Elbow Connectors
    Image of Product. Front orientation. Duct and Fittings. Spiral Duct and Fittings, 45° Elbow Connectors.
    Change the direction of airflow when joining lengths of duct.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    OD
    Ga.
    Each
    2221 7/8"24000000000000000
    Straight Connectors
    Image of Product. Front orientation. Duct and Fittings. Spiral Duct and Fittings, Straight Connectors.
    Join two lengths of duct.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    OD
    Ga.
    Each
    Male
    22—21 7/8"2200000000000000
     
    Female
    2222"—220000000000000
     
    Tee Connectors
    Image of Product. Front orientation. Duct and Fittings. Spiral Duct and Fittings, Tee Connectors.
    Split or merge airflow paths.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    OD
    Ga.
    Each
    2221 7/8"22000000000000000
    45° Wye Connectors
    Image of Product. Front orientation. Duct and Fittings. Spiral Duct and Fittings, 45° Wye Connectors.
    Split or merge airflow more gradually than tees. With less abrupt changes in direction, wyes reduce turbulence for smoother flow.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    OD
    Ga.
    Each
    2221 7/8"24000000000000000
    Straight Reducers
    Image of Product. Front orientation. Contains Annotated. Duct and Fittings. Spiral Duct and Fittings, Straight Reducers.
    Transition between duct of different diameters. Reducers also join larger duct with smaller duct that connects to equipment.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Duct
    Size
    OD
    Galvanized Steel
    (A)
    (B)
    (A)
    (B)
    Ga.
    Each
    222021 7/8"19 7/8"24000000000000000
    242223 7/8"21 7/8"2400000000000000
    End Caps
    Image of Product. Front orientation. Duct and Fittings. Spiral Duct and Fittings, End Caps.
    Cover unused duct openings to prevent air from leaking, dust from escaping, and debris from entering. End caps are often used to seal duct after changes to your system or equipment. To make modifications or expand your line, remove the cap.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    OD
    Ga.
    Each
    2221 7/8"2400000000000000

    Duct Flanges

    Image of Product. Side1 orientation. Contains Annotated. Duct Flanges, With Mounting Holes.
    Image of Product. Front orientation. Duct and Fittings. Duct Flanges, With Mounting Holes.
    Image of Product. Side1 orientation. Contains Annotated. Duct Flanges, Without Mounting Holes.
    Image of Product. Front orientation. Duct and Fittings. Duct Flanges, Without Mounting Holes.

    With Mounting

    Holes

    With Mounting Holes

    Without

    Mounting Holes

    Without Mounting

    Holes

    Mount flanges to air handlers and HVAC equipment to start a run of duct. They also create a secure joint between sections of duct—attach a flange to each piece. Also known as angle rings.
    With Mounting Holes—Ready to install, these flanges secure with screws.
    Without Mounting Holes—Drill your own holes or weld into place.
    Steel—Strong for a long life, these steel flanges can be painted or coated. Unless it’s finished, steel is best for dry environments.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Corrosion-Resistant 304 Stainless Steel—The most corrosion-resistant metal duct we sell. It won’t rust or degrade in systems that exhaust chemical fumes or vent heat from industrial ovens and dryers.
    Flange
    Mounting
    Duct
    Size
    ID
    Overall
    Dp.
    Ht.
    Thk.
    Fasteners
    Included
    No. of
    Holes
    Hole Dia.
    Each
    With Mounting Holes
     
    Steel
    2222 1/8"1 1/2"1 1/2"3/16"No127/16"0000000000000
     
    Galvanized Steel
    2222 1/8"1 1/2"1 1/2"3/16"No127/16"000000000000
     
    Corrosion-Resistant 304 Stainless Steel
    2222 1/8"1 1/2"1 1/2"3/16"No127/16"0000000000000
     
    Without Mounting Holes
     
    Steel
    2222 1/8"1 1/2"1 1/2"3/16"———000000000000
     
    Corrosion-Resistant 304 Stainless Steel
    2222 1/8"1 1/2"1 1/2"3/16"———0000000000000
     

    Airflow Dampers

    Image of Product. Front orientation. Duct Airflow Dampers. Airflow Dampers, Standard Airflow Damper, Male.

    Standard

    Airflow

    Damper, Male

    The simplest, most reliable way to regulate airflow in standard duct. Turn the lever to adjust the blade.
    Galvanized Steel—Strong and corrosion resistant, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    OD
    Overall
    Lg.
    Ga.
    Each
    Standard Airflow Damper
     
    Male
    2221 3/4"4 1/2"18000000000000000
     

    Tight-Seal Spiral Duct and Fittings

    Image of System. Front orientation. Contains MultipleImages. Duct and Fittings. Tight-Seal Spiral Duct and Fittings.
    Gasketed fittings prevent leaks between connections without the need for tape or other sealants. Duct has a continuous seam that reinforces it for strength and long life. The rigid construction keeps its shape, even against suction from dust collectors. Duct is smooth on the inside for efficient airflow. Because of its attractive look, spiral duct is often used for exposed heating and cooling systems.
    Straight Collars
    Image of Product. Front orientation. Duct and Fittings. Tight-Seal Spiral Duct and Fittings, Straight Collars.
    Link rectangular duct systems to equipment that uses round duct. Cut a hole, install the collar, and connect a piece of round duct.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Polyethylene Foam Gasket—The flange has an adhesive-backed gasket to bond the connection until you fasten with screws. The gasket also prevents leaks.
    Galvanized Steel
    with EPDM Gasket
    Duct
    Size
    OD
    Bottom Gasket
    Material
    Ga.
    Each
    2221 7/8"Polyethylene Foam2400000000000000
    Straight Collars with Airflow Damper
    Image of Product. Front orientation. Duct and Fittings. Tight-Seal Spiral Duct and Fittings, Straight Collars with Airflow Damper.
    Add a branch of round duct from rectangular systems and control airflow with the damper. Cut a hole, install the collar, and connect a piece of tight-seal spiral round duct.
    Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
    Polyethylene Foam Gasket—The flange has an adhesive-backed gasket to bond the connection until you fasten with screws. The gasket also prevents leaks.
    Galvanized Steel
    with EPDM Gasket
    Duct
    Size
    OD
    Bottom Gasket
    Material
    Ga.
    Each
    2221 7/8"Polyethylene Foam24000000000000000

    Airflow Dampers for Quick-Disconnect Duct

    Image of Product. Front orientation. Duct Airflow Dampers. Airflow Dampers for Quick-Disconnect Duct.
    Regulate airflow to sections of quick-disconnect duct. Often used in dust collection systems, these dampers attach with quick-release clamps. Turn the lever to adjust airflow.
    Galvanized Steel—Strong and corrosion resistant, galvanized steel is the most commonly used ductwork material.
    Galvanized Steel
    Duct
    Size
    ID
    Overall
    Lg.
    Ga.
    Each
    2222 1/8"23"20000000000000000
    Duct Clamps
    Image of Product. Front orientation. Duct and Fittings.
    Match clamps to your duct material.
    Galvanized Steel
    Duct
    Size
    Each
    2200000000000000

    Blast Gates for Quick-Disconnect Duct

    Image of Product. Front orientation. Duct Blast Gates. Blast Gates for Quick-Disconnect Duct.
    Slide these gates open and closed to control airflow to sections of quick-disconnect duct. Unlike dampers, which regulate flow, blast gates turn flow on or off. They’re commonly used in dust collecting systems, either to direct suction or collect material in a specific section of duct. Secure gates to a line using quick-disconnect clamps.
    Aluminum with Galvanized Steel Slide—Our most popular blast gates. The body is aluminum to reduce stress on your duct and the slide is galvanized steel for strength. Both components resist rust in wet environments.
    Overall
    Duct
    Size
    ID
    Wd.
    Ht.
    Dp.
    Each
    Aluminum with Galvanized Steel Slide
    2222"24 5/8"45 3/4"9 1/8"000000000000000
     
    Duct Clamps
    Image of Product. Front orientation. Duct and Fittings.
    Match clamps to your duct material.
    Galvanized Steel
    Duct
    Size
    Each
    2200000000000000

    Noise Reducers for Quick-Disconnect Duct

    Image of Product. Front orientation. Duct Noise Reducers. Noise Reducers for Quick-Disconnect Duct.
    Image of Product. Front orientation. Duct and Fittings.

    Duct Clamps

    Muffle noise from high-velocity airflow and fans, blowers, and dust collectors. These reducers are insulated to cut sound levels in your facility by 25%. Install in quick-disconnect duct systems using clamps.
    Galvanized Steel—Strong and corrosion resistant, galvanized steel is the most commonly used ductwork material.
    Duct Noise Reducers
    Galvanized
    Steel Clamps
    Overall
    Galvanized Steel
    Duct
    Size
    ID
    Dia.
    Lg.
    Sound
    Absorbed
    Ga.
    Each
    Each
    2222"34 1/8"64"25%200000000000000000000000000000000
    back to top