Rugged, yet pliable PVC makes this a good general purpose hose for venting smoke, propane fumes, and water-based paint fumes.

With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.

If you’re tight on storage space, this hose compresses down to a small size.

Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.

Unlike other duct hose that has a metal spiral, this hose has a plastic spiral that will not rust.

Alumina-coated glass fabric withstands extreme temperatures like stainless steel, but is much more flexible.

Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures.

A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.

Hose has a flexible plastic spiral that bounces back to its original shape when stepped on.

This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.

A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).

The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.

Blow jagged, abrasive materials through this hose without worrying about punctures or tears. It’s made of extra--thick TPU (thermoplastic polyurethane).

SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.

The strongest nonmetal duct hose we offer, this SBR (styrene butadiene rubber) hose is reinforced with yarn and has a metal spiral.

A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications.

A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.

Don’t worry about crushing this hose if you step on it—it has a flexible plastic spiral that springs back to its original shape.

Hose meets UL 94 V-2 for flame retardance.

Not only is TPU (Thermoplastic polyurethane) tough enough to handle heavy particles and cardboard fibers, the material is clear so you can monitor flow.

Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.

Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature.

The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps.

A metalized polyester cover reflects heat so the temperature inside the hose won’t rise.

A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.

Step on or drive over this hose without causing damage.

A smooth interior allows for unrestricted flow and makes this hose easy to clean.

Join duct and fittings with quick-release clamps for faster disassembly and cleanout than other duct systems.

A spiral seam gives this duct greater strength and rigidity than standard duct.

Fittings have gaskets which create a tight seal—you don't need to seal joints with coating or tape.

Often used in tight spaces, such as in walls and ceilings, rectangular duct allows you to select larger sizes without increasing duct height.

Bolt flanges to equipment to start a run of duct.

Control the flow of air and material through duct systems.

Often added to existing systems, these gates install without disassembling duct. Also known as half gates.

Connect diffusers to duct.

Save energy and increase comfort by heating and cooling only the areas that need it.

Also known as barometric dampers, these dampers improve furnace performance by automatically opening and closing to maintain consistent airflow despite changing environmental conditions.

These noise reducers mount directly to spiral duct to decrease noise by as much as 50%.

Add a flexible joint to your system to reduce vibration caused by fans and blowers.

The panels open and close by turning the knobs.

Built to withstand temperatures up to 1000° F, these vent pipes and fittings are for use with boilers, furnaces, stoves, and other equipment that is fired by coal, gas, oil, propane, or wood.

The expanded mesh on these vent caps provides spark protection.

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

Insert these fans directly into your ductwork. They give small heaters and air conditioners a boost to circulate air through ductwork.

Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged.