Roller Diameter Roller Diameter |
|---|
|
|
|
Drive Style Drive Style |
|---|
 | |
 |
Roller Material Roller Material |
|---|
|
For Load Direction For Load Direction |
|---|
 | Radial |
 | Combined Radial and Thrust |
 | Thrust |
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
|---|
|
Stud Material Stud Material |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Threaded Track Rollers with Adjustable Shoulder
Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Secure the stud with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Ht. Adjustment Capability | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | ||||||||||||||||
| 3/4" | 1/2" | 3/8" | 3/8" | 3/8"-24 | 3/8" | 1/2" | 1/2" | 0.015" | 5,000 | 3,100 | 1,800 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 7/8" | 1/2" | 3/8" | 3/8" | 3/8"-24 | 3/8" | 1/2" | 1/2" | 0.015" | 5,000 | 3,100 | 1,800 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1" | 5/8" | 7/16" | 1/2" | 7/16"-20 | 1/2" | 5/8" | 1/2" | 0.03" | 4,500 | 4,800 | 2,300 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 1/8" | 5/8" | 7/16" | 1/2" | 7/16"-20 | 1/2" | 5/8" | 1/2" | 0.03" | 4,500 | 4,800 | 2,300 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 1/4" | 3/4" | 1/2" | 5/8" | 1/2"-20 | 5/8" | 11/16" | 5/8" | 0.03" | 3,900 | 6,600 | 4,200 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 3/8" | 3/4" | 1/2" | 5/8" | 1/2"-20 | 5/8" | 11/16" | 5/8" | 0.03" | 3,900 | 6,600 | 4,200 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 1/2" | 7/8" | 5/8" | 3/4" | 5/8"-18 | 3/4" | 7/8" | 3/4" | 0.03" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 5/8" | 7/8" | 5/8" | 3/4" | 5/8"-18 | 3/4" | 7/8" | 3/4" | 0.03" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 3/4" | 1" | 3/4" | 7/8" | 3/4"-16 | 7/8" | 1" | 7/8" | 0.03" | 2,600 | 12,000 | 6,400 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 7/8" | 1" | 3/4" | 7/8" | 3/4"-16 | 7/8" | 1" | 7/8" | 0.03" | 2,600 | 12,000 | 6,400 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 2" | 1 1/4" | 7/8" | 1" | 7/8"-14 | 1" | 1 3/16" | 1" | 0.03" | 2,200 | 16,000 | 9,600 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 2 1/4" | 1 1/4" | 7/8" | 1" | 7/8"-14 | 1" | 1 3/16" | 1" | 0.03" | 2,200 | 16,000 | 9,600 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Steel Crowned Rollers with Seal | ||||||||||||||||
| 3/4" | 1/2" | 3/8" | 3/8" | 3/8"-24 | 3/8" | 1/2" | 1/2" | 0.015" | 5,000 | 3,100 | 1,800 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 7/8" | 1/2" | 3/8" | 3/8" | 3/8"-24 | 3/8" | 1/2" | 1/2" | 0.015" | 5,000 | 3,100 | 1,800 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1" | 5/8" | 7/16" | 1/2" | 7/16"-20 | 1/2" | 5/8" | 1/2" | 0.03" | 4,500 | 4,800 | 2,300 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 1/4" | 3/4" | 1/2" | 5/8" | 1/2"-20 | 5/8" | 11/16" | 5/8" | 0.03" | 3,900 | 6,600 | 4,200 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 3/8" | 3/4" | 1/2" | 5/8" | 1/2"-20 | 5/8" | 11/16" | 5/8" | 0.03" | 3,900 | 6,600 | 4,200 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 1/2" | 7/8" | 5/8" | 3/4" | 5/8"-18 | 3/4" | 7/8" | 3/4" | 0.03" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 3/4" | 1" | 3/4" | 7/8" | 3/4"-16 | 7/8" | 1" | 7/8" | 0.03" | 2,600 | 12,000 | 6,400 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 2" | 1 1/4" | 7/8" | 1" | 7/8"-14 | 1" | 1 3/16" | 1" | 0.03" | 2,200 | 16,000 | 9,600 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 2 1/4" | 1 1/4" | 7/8" | 1" | 7/8"-14 | 1" | 1 3/16" | 1" | 0.03" | 2,200 | 16,000 | 9,600 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Roller, mm | Stud, mm | Thread | Shoulder, mm | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Dia. | Lg. | Ht. Adjustment Capability, mm | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | |||||||||||||||||
| 16 | 11 | 6 | 16 | M6 | 1 | 9 | 9 | 7 | 0.5 | 13,000 | 520 | 1,300 | 250° | Needle Roller | Mounting Hardware | 0000000 | 0000000 |
| 19 | 11 | 8 | 20 | M8 | 1.25 | 11 | 11 | 9 | 0.5 | 10,000 | 1,100 | 1,500 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 22 | 12 | 10 | 23 | M10 | 1 | 12 | 13 | 10 | 0.5 | 9,000 | 2,300 | 1,700 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 26 | 12 | 10 | 23 | M10 | 1 | 12 | 13 | 10 | 0.5 | 9,000 | 2,300 | 1,700 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Steel Crowned Rollers with Seal | |||||||||||||||||
| 16 | 11 | 6 | 16 | M6 | 1 | 9 | 9 | 7 | 0.5 | 13,000 | 520 | 1,300 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 19 | 11 | 8 | 20 | M8 | 1.25 | 11 | 11 | 9 | 0.5 | 10,000 | 1,100 | 1,500 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 26 | 12 | 10 | 23 | M10 | 1.25 | 13 | 13 | 10 | 0.5 | 9,000 | 2,300 | 1,700 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Threaded V-Groove Track Rollers with Adjustable Shoulder
Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Secure the stud with a nut for through-hole mounting. All rollers are permanently lubricated.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Groove | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Includes | Each | |
Steel V-Groove Rollers with Seal | |||||||||||||||||
| 1 1/2" | 45/64" | 7/16" | 1" | 7/16"-20 | 1/2" | 3/4" | 1/32" | 3/8" | 3/16" | 8,000 | 230 | 230 | 140 | 225° | Mounting Hardware | 0000000 | 0000000 |
| 1 1/2" | 25/32" | 7/16" | 1" | 7/16"-20 | 1/2" | 3/4" | 1/32" | 3/8" | 3/16" | Not Rated | 300 | 300 | 200 | 225° | Mounting Hardware | 0000000 | 000000 |
| 2" | 13/16" | 1/2" | 1 1/4" | 1/2"-20 | 5/8" | 13/16" | 1/32" | 5/8" | 5/16" | 6,000 | 600 | 500 | 370 | 225° | Mounting Hardware | 0000000 | 000000 |
| 2 1/2" | 1 1/4" | 3/4" | 1 3/4" | 3/4"-16 | 57/64" | 1 3/8" | 1/16" | 1" | 1/2" | 6,000 | 1,100 | 1,000 | 470 | 225° | Mounting Hardware | 0000000 | 000000 |
| 3 1/2" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/64" | 1 1/2" | 1/16" | 1 1/4" | 5/8" | 4,000 | 2,200 | 1,900 | 1,300 | 225° | Mounting Hardware | 0000000 | 000000 |
| 3 1/2" | 1 57/64" | 3/4" | 2" | 3/4"-16 | 1 1/64" | 1 1/2" | 1/8" | 1 1/4" | 5/8" | Not Rated | 7,200 | 3,700 | 3,100 | 225° | Mounting Hardware | 0000000 | 000000 |
Roller, mm | Stud, mm | Thread | Groove, mm | Radial Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Shoulder Lg., mm | Hex Shoulder Wd., mm | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Includes | Each | |
Steel V-Groove Rollers with Seal | ||||||||||||||||||
| 20 | 8 | 6 | 8 | M6 | 1 | 6 | 3.4 | 11.11 | 4 | 2 | 5,000 | 270 | 270 | 50 | 245° | Mounting Hardware | 0000000 | 000000 |
| 31 | 11 | 10 | 11 | M8 | 1.25 | 9 | 4.1 | 14.29 | 6 | 3 | 3,400 | 590 | 590 | 140 | 245° | Mounting Hardware | 0000000 | 00000 |
| 46 | 16 | 11 | 15 | M10 | 1.5 | 11 | 5.7 | 19.05 | 8 | 4 | 2,200 | 1,300 | 1,300 | 380 | 245° | Mounting Hardware | 0000000 | 00000 |
Sanitary Threaded V-Groove Track Rollers
Guide loads along angle rail tracks in food and pharmaceutical plants or other sanitary environments with these threaded rollers. They’re permanently lubricated, a feature often seen in sanitary areas where repeated lubrication could cause contamination. Their lubricant is NSF registered H1 as safe for incidental contact with food. They’re made of stainless steel, so they won’t corrode from frequent washdowns with harsh cleaners. The bearings are sealed and shielded to keep out liquid and make sure the lubricant stays intact. These rollers have a V-groove profile, which allows debris to fall off when they’re mounted on angle rails. They’re also known as cam followers.
Rollers with an adjustable shoulder are also known as eccentric track rollers. They can be moved up and down, and they’re commonly used alongside standard rollers to correct misalignment. Secure them with a nut for through-hole mounting.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Stud, mm | Thread | Groove, mm | Radial Load Cap., lbs. | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Shoulder Lg., mm | Hex Shoulder Wd., mm | Ht. Adjustment Capability, mm | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Single-Sealed 440C Stainless Steel V-Groove Rollers | ||||||||||||||||||||
Adjustable Shoulder | ||||||||||||||||||||
| 31 | 11 | 10 | 25 | M10 | 1.5 | 15 | 3.1 | 14 | 1 | 6 | 3 | 3,400 | 590 | 590 | 140 | 175° | Ball | Mounting Hardware | 0000000 | 0000000 |
| 46 | 16 | 12 | 30 | M12 | 1.75 | 18 | 4.1 | 19 | 1.5 | 8 | 4 | 2,200 | 1,300 | 1,300 | 380 | 175° | Ball | Mounting Hardware | 0000000 | 000000 |
Hex Flanged Eccentric Bushings
Often used with V-groove wheels or track roller carriages, these off-center bushings create precise mounting clearance. As you turn the bushing’s hex flange with a wrench, it adjusts the distance between the V-groove wheel or carriage and the rail. Tighten the axle bolt in place once you’ve adjusted them. Made of 303 stainless steel, these bushings have very good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| For Hole Diameter | Overall Width | Flange Height | Hex Size | Material | Each | |
| 0.188" | 35/64" | 1/4" | 7/16" | 303 Stainless Steel | 00000000 | 00000 |
| 0.375" | 45/64" | 9/32" | 9/16" | 303 Stainless Steel | 00000000 | 00000 |
| 0.472" | 1" | 3/8" | 3/4" | 303 Stainless Steel | 00000000 | 00000 |
| 0.591" | 1 11/64" | 7/16" | 7/8" | 303 Stainless Steel | 00000000 | 00000 |
| 9.53mm | 17mm | 7mm | 14mm | 303 Stainless Steel | 00000000 | 00000 |
| 12mm | 25mm | 9mm | 19mm | 303 Stainless Steel | 00000000 | 00000 |
| 15mm | 30mm | 11mm | 22mm | 303 Stainless Steel | 00000000 | 00000 |