Quickly seal corners without needing to bend, cut, or piece straight seals together. All of these seals are made of EPDM foam to resist water, sunlight, and ozone.

Use the straight seals (sold separately) to fill in gaps along edges if the corner seals aren't long enough for your application.

For technical drawings and 3-D models, click on a part number.

Similar to standard silicone seals, fluorosilicone rubber seals can be used at high temperatures, but also withstand fuel and oil.

For technical drawings and 3-D models, click on a part number.

In addition to oil, these Buna-N seals resist grease, salts, water, steam, and most detergents. Push them onto a door’s edge to stop wind, dust, and water from entering. All have a hollow bulb for compressibility.

Buna-N foam seals have a closed-cell construction that resists absorption. They also have gripping edges with fingers for a strong hold.

For technical drawings and 3-D models, click on a part number.

FDA compliant, these seals can directly touch food. They’re made of Buna-N foam, so they resist oil, grease, salts, water, and most detergents. The foam resists absorption thanks to its closed-cell construction.

For technical drawings and 3-D models, click on a part number.

Save time covering corners—these seals come formed to a corner, so they don't require bending or cutting. Made of Buna-N foam, these seals resist oil, grease, salts, water, and most detergents. The foam has a closed-cell construction, so it resists absorption.

Use straight seals (sold separately) to fill in gaps along edges if the corner seal isn’t long enough for your application.

For technical drawings and 3-D models, click on a part number.

Made of fluorosilicone rubber, these seals withstand high temperatures like standard silicone without breaking down when exposed to fuel and oil.

For technical drawings and 3-D models, click on a part number.

In addition to oil, these seals resist grease, salts, water, steam, and most detergents.

For technical drawings and 3-D models, click on a part number.

Use these Viton® fluoroelastomer rubber seals with fuels and aggressive chemicals, such as petroleum oil, hydrofluoric acid, and propyl alcohol. They have hollow construction for compressibility. Attach them directly to a door’s surface to shield against dust, noise, and vibration.

For technical drawings and 3-D models, click on a part number.

To stand up to oil, grease, salts, water, and most detergents, these seals are made of Buna-N rubber. They have a hollow construction, so they’re more compressible than solid seals.

For technical drawings and 3-D models, click on a part number.

Made of Viton® fluoroelastomer rubber, these seals stand up to fuels and aggressive chemicals, such as petroleum oil, hydrofluoric acid, and propyl alcohol. They have hollow construction for compressibility and a flange that can be positioned along a door’s edge to cover gaps and block dust, noise, and vibration.

For technical drawings and 3-D models, click on a part number.

Made of Buna-N rubber, these seals resist oil, grease, salts, water, steam, and most detergents. They have a hollow construction, so they’re more compressible than solid seals.

For technical drawings and 3-D models, click on a part number.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces. They’re thicker than most non-sagging sealants, so they can be used in vertical joints up to 1/2" wide.

Elongation indicates flexibility—the higher the values are, the more sealants can stretch. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.

Silicone sealants have excellent ozone resistance.

Sealants that cannot be sold to California exceed local regulatory limits on VOC (volatile organic compounds).

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Elongation and joint expansion/compression tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint expansion/compression tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.

Sealants that cannot be sold to California exceed local regulatory limits on VOC (volatile organic compounds).

Designed to withstand extreme environments, these fluoroelastomer sealants have excellent resistance to sulfuric acid, hydrochloric acid, nitric acid, gasoline, and oil. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Elongation and joint expansion/compression tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.

Sealants that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).