About On/Off Valves
More
Fast-Acting Panel-Mount Threaded On/Off Valves
Start or stop flow with the flip of a toggle switch or the push of a button. These valves are often used in testing and sampling applications where you need to dispense a small amount of liquid. They fit through a cutout, so the body of the valve stays safe inside your instrumentation panel.
Nickel-plated brass valves resist corrosion better than plain brass valves. 316 stainless steel valves stand up to corrosion better than both plain and nickel-plated brass valves.
Manual-return valves stay open until you flip the toggle off. Since they don't need to be held open, they’re often used to dispense larger samples than spring-return valves. It’s also easy to check if these valves are open or not based on the toggle’s position. Spring-return valves automatically close when you release the toggle or push button. They’re ideal for intermittent use and precise flow control to prevent spills.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- Valve Type: Stem
- For Use With: See table
- Seal Material: See table
| Pipe Size  | Thread Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Valve Starting Position | Return Actuation | Toggle Material | Seal Material | Port-to-Port Lg. | Panel Cutout Dia. | For Use With | Each | |
NPTF Female × NPTF Female | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/8 | __ | 0.3 | 200 psi @ 70° F | -15° to 250° | __ | Manual | Metal | Fluoroelastomer Rubber | 3/4" | 9/16" | Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon | 0000000 | 000000 |
| 1/4 | __ | 1.2 | 125 psi @ 70° F | -15° to 250° | __ | Manual | Metal | Fluoroelastomer Rubber | 3/4" | 9/16" | Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon | 0000000 | 00000 |
UNF Female × UNF Female | |||||||||||||
| __ | 10-32 | 6.8 | 150 psi @ 70° F | 35° to 230° | Normally Closed | Spring | Plastic | Buna-N Rubber | 5/16" | 15/32" | Water, Oil, Air | 0000000 | 00000 |
| __ | 10-32 | 7.3 | 150 psi @ 70° F | 35° to 230° | __ | Manual | Metal | Buna-N Rubber | 5/16" | 15/32" | Water, Oil, Air | 0000000 | 00000 |
NPT Male × UNF Female | |||||||||||||
| 1/8 | 10-32 | 7.3 | 150 psi @ 70° F | 35° to 230° | __ | Manual | Metal | Buna-N Rubber | 5/16" | 15/32" | Water, Oil, Air | 0000000 | 00000 |
| 1/8 | 10-32 | 8 | 150 psi @ 70° F | 35° to 230° | __ | Manual | Plastic | Buna-N Rubber | 5/16" | 15/32" | Water, Oil, Air | 0000000 | 00000 |
| 1/8 | 10-32 | 8 | 150 psi @ 70° F | 35° to 230° | Normally Closed | Spring | Metal | Buna-N Rubber | 5/16" | 15/32" | Water, Oil, Air | 0000000 | 00000 |
NPT Male × NPT Male | |||||||||||||
| 1/4 | __ | 0.2 | 300 psi @ 200° F | -20° to 200° | __ | Manual | Plastic | PTFE Plastic | 1" | 17/32" | Water, Air, Argon, Helium, Krypton, Neon, Xenon | 0000000 | 00000 |
- Valve Type: Stem
- For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
- Seal Material: Buna-N Rubber Seal
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Return Actuation | Toggle Material | Port-to-Port Lg. | Panel Cutout Dia. | Each | |
NPT Female × NPT Female | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/8 | 0.2 | 125 psi @ 70° F | -40° to 180° | Manual | Plastic | 1/2" | 15/32" | 0000000 | 000000 |
- Valve Type: Stem
- For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
- Seal Material: PTFE Plastic Seal
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Return Actuation | Toggle Material | Port-to-Port Lg. | Panel Cutout Dia. | Each | |
NPT Male × NPT Male | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/4 | 0.2 | 300 psi @ 200° F | -20° to 200° | Manual | Plastic | 1" | 17/32" | 0000000 | 0000000 |
Fast-Acting Threaded On/Off Valves
Push a button or flip a toggle switch to start or stop flow. Often used in testing and sampling, these valves are useful when you need to dispense a small amount of liquid.
Nickel-plated brass valves resist corrosion better than plain brass valves.
Toggle valves stay open until you flip them closed. Since they don't need to be held open, they’re often used to dispense larger samples than push-button valves. You can see if these valves are open or not based on the toggle's position.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- Valve Type: Stem
- For Use With: Air, Oil, Water
- Seal Material: Buna-N Rubber
| Pipe Size | Thread Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port-to-Port Lg. | Toggle Color | Each | |
NPT Female × UNF Female | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/8 | 10-32 | 0.15 | 125 psi @ 180° F | -25° to 180° | 5/16" | Black | 00000000 | 000000 |
NPT Female × UNF Male | ||||||||
| 1/8 | 10-32 | 0.15 | 125 psi @ 180° F | -25° to 180° | 9/16" | Black | 00000000 | 00000 |
NPT Male × UNF Female | ||||||||
| 1/8 | 10-32 | 0.15 | 125 psi @ 180° F | -25° to 180° | 5/16" | Black | 00000000 | 00000 |
NPT Male × UNF Male | ||||||||
| 1/8 | 10-32 | 0.15 | 125 psi @ 180° F | -25° to 180° | 9/16" | Black | 00000000 | 00000 |
Swivel Threaded On/Off Valves
Make connections from any direction—the body of these valves swivels 360° for easy installation. Often used in testing and sampling applications, they quickly open and close with a toggle or button.
Toggle-switch valves stay open until you flip them closed. Since they don’t need to be held open, they’re often used to dispense large samples. The toggle’s position shows you if they’re open or closed.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- Valve Type: Stem
- For Use With: Water, Oil, Air
- Seal Material: Buna-N Rubber
Slide-In Threaded On/Off Valves
Control flow in passageways of manifolds and valve mounting blocks without external pipes. Also known as cartridge valves, they slide into unthreaded holes and secure in place with the included set screw. These valves are ideal for testing and sampling applications because you can quickly open and close them with a toggle or button.
Toggle-switch valves stay open until you flip them closed. Since they don’t need to be held open, they’re often used to dispense large samples. The toggle’s position shows you if they’re open or closed.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- Valve Type: Stem
- For Use With: Air, Oil, Water
- Seal Material: Buna-N Rubber
Required Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Valve Starting Position | Return Actuation | Port-to-Port Lg. | Groove Wd. | Dia. | Dp. | Set Screw Included | Each | |
UNF Female × Unthreaded | ||||||||||||
| 10-32 | 0.1 | 125 psi @ 180° F | -25° to 180° | Normally Closed | Manual | 3/8" | 0.147" | 0.437"-0.440" | 1.030" | Yes | 00000000 | 000000 |
UNF Male × Unthreaded | ||||||||||||
| 10-32 | 0.1 | 125 psi @ 180° F | -25° to 180° | Normally Closed | Manual | 5/8" | 0.147" | 0.437"-0.440" | 1.030" | Yes | 00000000 | 00000 |
Fast-Acting Panel-Mount On/Off Valves with Yor-Lok Fittings
- Valve Type: Stem
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: PTFE Plastic
Flip the toggle to quickly turn these valves on and off. All have threads and a hex nut below the handle for installation in instrument panels. For extra gripping power and a strong seal, they have Yor-Lok fittings with two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.
316 stainless steel valves are more corrosion resistant than brass valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Panel-Mount On/Off Valves with Barbed Fittings
- Valve Type: Stem
- For Use With: Water, Oil, Air
- Seal Material: Buna-N Rubber
Flip a switch or push a button to control flow while your line stays protected behind an instrument panel. These valves come with a nut to mount the switch or button to the panel. They’re often used to dispense small amounts of liquid for testing and sampling since they allow you to turn flow on and off quickly. Barbs on these valves grip tubing for a secure hold behind the panel. For good corrosion resistance in wet environments, the body is nickel-plated brass.
Toggle-switch valves stay open until you flip them closed. They don't need to be held open, so they’re often used to dispense larger samples than push-button valves. You’ll know at a glance if these valves are open or closed based on the toggle's position.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
| Pipe Size | Thread Size | For Tube ID | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Return Actuation | Port-to-Port Lg. | Panel Cutout Dia. | Each | |
Barbed × Barbed | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| __ | __ | 1/8" | 0.1 | 125 psi @ 180° F | -25° to 180° | Manual | 3/4" | 15/32" | 0000000 | 000000 |
NPT Female × Barbed | ||||||||||
| 1/8 | __ | 1/8" | 0.1 | 125 psi @ 180° F | -25° to 180° | Manual | 3/4" | 15/32" | 0000000 | 00000 |
NPT Male × Barbed | ||||||||||
| 1/8 | __ | 1/8" | 0.1 | 125 psi @ 180° F | -25° to 180° | Manual | 3/4" | 15/32" | 0000000 | 00000 |
UNF Female × Barbed | ||||||||||
| __ | 10-32 | 1/8" | 0.1 | 125 psi @ 180° F | -25° to 180° | Manual | 3/4" | 15/32" | 0000000 | 00000 |
UNF Male × Barbed | ||||||||||
| __ | 10-32 | 1/8" | 0.1 | 125 psi @ 180° F | -25° to 180° | Manual | 3/4" | 15/32" | 0000000 | 00000 |
Swivel On/Off Valves with Barbed Fittings
For easy installation from any direction, the body on these valves swivels 360°. They have barbs to securely grip tubing. Often used in testing and sampling applications, they quickly open and close with a toggle or button.
Toggle-switch valves stay open until you flip them closed. Since they don’t need to be held open, they’re often used to dispense large samples. The toggle’s position shows you if they’re open or closed.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- Valve Type: Stem
- For Use With: Air, Oil, Water
- Seal Material: Buna-N Rubber
| Thread Size | For Tube ID | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Return Actuation | Port-to-Port Lg. | Panel Cutout Dia. | Each | |
UNF Female × Barbed | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 10-32 | 1/8" | 0.1 | 125 psi @ 100° F | -25° to 180° | Manual | 9/16" | 15/32" | 0000000 | 000000 |
UNF Male × Barbed | |||||||||
| 10-32 | 1/8" | 0.1 | 125 psi @ 100° F | -25° to 180° | Manual | 9/16" | 15/32" | 0000000 | 00000 |
Barbed × Barbed | |||||||||
| __ | 1/8" | 0.1 | 125 psi @ 100° F | -25° to 180° | Manual | 9/16" | 15/32" | 0000000 | 00000 |