How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About On/Off Valves
More
Low-Pressure Press-Connect Stainless Steel Unthreaded Pipe Fittings
- For Use With: Air, Ethylene Glycol, Propylene Glycol, Water, Diesel Fuel, Fuel Oil
- Maximum Pressure: 125 psi @ 72° F
- Specifications Met: ASME B31.1, ASME B31.3, ASME B31.9
- O-Ring Material: Fluoroelastomer Rubber
- Pipe Nipples and Pipe: Use Schedule 10, 40 Stainless Steel
- Flanges: Use Class 150 Stainless Steel
Press these fittings onto stainless steel pipe using a crimping tool for a permanent, leak-tight connection that's faster than threading or welding and doesn't require heat. Fittings have an internal stainless steel gripping ring and rubber O-ring that create a seal when crimped. They are designed to leak if fittings have not been crimped; a colored dot marks the leak path so it's easy to spot unsealed connections. All of these fittings are made of 304 stainless steel to resist corrosion from frequent exposure to water and fuels. They’re often used for water processing lines, heating and cooling systems, and fuel lines. They are comparable to Viega MegaPress fittings.
Fittings meet ANSI/ASME B31 code requirements for use in pressure piping systems.
Crimping tools seal fittings in less than five seconds. These tools are cordless, so you can take them to any job. Connect the jaw or ring that matches your pipe size to these tools, then pull the trigger to crimp the fitting. The pivoting head lets you access connections from any angle.
Battery | |||||||
|---|---|---|---|---|---|---|---|
Voltage | No. Included | Cap., amp-hrs. | Battery Charger Included | Battery Charging Time, min. | Compatible With | Each | |
| 18V DC | 2 | 3 | Yes | 39 | Viega MegaPress Viega ProPress Viega ProPress XL-C | 00000000 | 000000000 |
Jaw and ring sets include three jaws, three rings, and one ring actuator jaw. Jaws are for pipe sizes 1/2 to 1; they fit directly into the crimping tool. Rings are for pipe sizes 1 1/4 to 2; clip the ring around the fitting and use the ring actuator jaw and crimping tool to press the open ends together.
For Pipe | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Material | For Manufacturer | For Manufacturer Model No. | Compatible With | Includes | Container Type | Each | |
| 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | Stainless Steel, Steel | Ridgid | RP 340 | Viega MegaPress | One Ring Actuator Jaw Three Jaws (1/2-1 Pipe Size) Three Rings (1 1/4-2 Pipe Size) | Carrying Case | 00000000 | 000000000 |
Low-Pressure Press-Connect Steel Unthreaded Pipe Fittings
- For Use On:
EPDM Rubber O-Ring: Ethylene Glycol, Propylene Glycol, Water
Buna-N Rubber O-Ring: Air, Lubricants, Propane, Fuel Oil, Natural Gas, Diesel Fuel - Specifications Met:
EPDM Rubber O-Ring: ASME B31,1, ASME B31.3, ASME B31.9, FM 1920, UL 213
Buna-N Rubber O-Ring: ASME B31.1, ASME B31.3, ASME B31.9, ANSI LC4/CSA 6.32, International Fuel Gas Code - Maximum Pressure:
EPDM Rubber O-Ring: 200 psi @ 72° F
Buna-N Rubber O-Ring: 125 psi @ 72° F - Pipe Nipples and Pipe: Use Schedule 40 Steel
- Flanges: Use Class 150 Steel
Crimp these fittings onto steel pipe to form a tightly sealed connection that’s faster than threading or welding and doesn’t require heat. An internal gripping ring and rubber O-ring create a secure seal when crimped. They are designed to leak if fittings have not been crimped; a colored dot marks the leak path so it's easy to spot unsealed connections. These steel fittings are coated in zinc-nickel to resist corrosion, but will rust if frequently exposed to saltwater or harsh chemicals. They are comparable to Viega MegaPress steel fittings.
Fittings meet ASME B31 code requirements for use in pressure piping systems.
Fittings with an EPDM rubber O-ring are often used for water processing lines, fire sprinklers, and heating and cooling systems. EPDM rubber won’t degrade when exposed to water, ethylene glycol, and propylene glycol. These fittings meet UL 213 and FM 1920 standards for use in fire protection systems.
Crimping tools seal fittings in less than five seconds. These tools are cordless, so you can take them to any job. Connect the jaw or ring that matches your pipe size to these tools, then pull the trigger to crimp the fitting. The pivoting head lets you access connections from any angle.
Battery | |||||||
|---|---|---|---|---|---|---|---|
| Voltage | No. Included | Cap., amp-hrs. | Battery Charger Included | Battery Charging Time, min. | Compatible With | Each | |
| 18V DC | 2 | 3 | Yes | 39 | Viega MegaPress Viega ProPress Viega ProPress XL-C | 00000000 | 000000000 |
Jaw and ring sets include three jaws, three rings, and one ring actuator jaw. Jaws are for pipe sizes 1/2 to 1; they fit directly into the crimping tool. Rings are for pipe sizes 1 1/4 to 2; clip the ring around the fitting and use the ring actuator jaw and crimping tool to press the open ends together.
For Pipe | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Material | For Manufacturer | For Manufacturer Model No. | Compatible With | Includes | Container Type | Each | |
| 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | Stainless Steel, Steel | Ridgid | RP 340 | Viega MegaPress | One Ring Actuator Jaw Three Jaws (1/2-1 Pipe Size) Three Rings (1 1/4-2 Pipe Size) | Carrying Case | 00000000 | 000000000 |
Compact Threaded On/Off Valves for Chemicals
For chemical-processing applications in confined areas, these valves have a low-profile handle to fit in tight spots. A rubber seal and a plastic body stand up to aggressive, corrosive solutions.
Full-port valves do not restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- Valve Type: Stop Cock
- For Use With: Ammonia, Carbon Dioxide, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Liquid Carbon Dioxide, Phosphoric Acid, Sodium Hydroxide, Water
- Seal Material: EPDM Rubber
| For Tube ID | Pipe Size | Flow Coefficient (Cv) | Port Type | Max. Pressure | Temperature Range, °F | Port-to-Port Lg. | Each | |
Barbed × NPT Male | ||||||||
|---|---|---|---|---|---|---|---|---|
| 5/8" | 1/4 | 1.2 | Full | 150 psi @ 70° F | 35° to 120° | 3 11/16" | 000000000 | 000000 |
On/Off Valves with Barbed Fittings for Chemicals
Barbs grip onto tubing, providing a secure hold. To withstand aggressive and corrosive solutions in chemical-processing applications, these valves have a plastic body and a chemical-resistant seal.
Polypropylene valves offer good heat resistance. Use them in systems that connect to a heater.
Lever handles show the valve’s position.Valves with tapered barbs can be used with multiple tube sizes.
Full-port valves do not restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- Valve Type: Ball
- For Use With: Air, Argon, Carbon Dioxide, Citric Acid, Deionized Water, Ethylene Glycol, Fuel Oil, Helium, Isopropyl Alcohol, Krypton, Natural Gas, Neon, Nitrogen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water, Xenon
- Ball Material: Polypropylene Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
| Pipe Size | For Tube ID | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
NPT Male × Tapered Barbed | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4 | 3/8", 1/2", 5/8" | 1.4 | 125 psi @ 140° F | 40° to 140° | Full | 2 5/16" | 00000000 | 000000 |
On/Off Valves with Push-to-Connect Fittings for Chemicals
Push to Connect ×
Push to Connect
Insert tubing into the fittings on these valves—no heat, solder, or flux required. To withstand aggressive and corrosive solutions, they have a chemical-resistant fluoroelastomer seal and a plastic body.
Full-port valves do not restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- Valve Type: Ball
- For Use With:
Connector: Air, Argon, Carbon Dioxide, Citric Acid, Deionized Water, Ethylene Glycol, Fuel Oil, Helium, Isopropyl Alcohol, Krypton, Natural Gas, Neon, Nitrogen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water, Xenon
Adapter: Air, Citric Acid, Ethylene Glycol, Helium, Isopropyl Alcohol, Mineral Spirits, Natural Gas, Nitrogen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sulfuric Acid, Water - Ball Material: Polypropylene Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
| Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
90° Elbow Adapter, Push to Connect × Female NPT Threaded | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 000000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
| 1/2 | 1/2" | 2.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Male NPT Threaded | ||||||||
| 1/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Push to Connect | ||||||||
| __ | 1/4" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 1/4" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| __ | 3/8" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
90° Elbow Connector, Push to Connect × Push to Connect | ||||||||
| __ | 1/4" × 1/4" | 0.6 | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 3/8" × 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 1/2" × 1/2" | 2.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
- Valve Type: Ball
- For Use With: Air, Carbon Dioxide, Deionized Water, Ethanol, Ethylene Glycol, Helium, Isopropyl Alcohol, Mineral Spirits, Natural Gas, Nitrogen, Oxygen, Phosphoric Acid, Salt Water, Soap Solutions, Water
- Ball Material: PVC Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
| Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
90° Elbow Adapter, Push to Connect × Female NPT Threaded | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 000000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
| 1/2 | 1/2" | 2.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Male NPT Threaded | ||||||||
| 1/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Push to Connect | ||||||||
| __ | 1/4" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 1/4" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| __ | 3/8" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
90° Elbow Connector, Push to Connect × Push to Connect | ||||||||
| __ | 1/4" × 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 3/8" × 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 1/2" × 1/2" | 2.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
- Valve Type: Ball
- For Use With: Air, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Helium, Kerosene, Mineral Spirits, Nitrogen, Salt Water, Soap Solutions, Water, Xylene
- Ball Material: Nylon Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
| Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
90° Elbow Adapter, Push to Connect × Female NPT Threaded | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 000000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
| 1/2 | 1/2" | 2.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Male NPT Threaded | ||||||||
| 1/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Push to Connect | ||||||||
| __ | 1/4" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 1/4" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| __ | 3/8" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
90° Elbow Connector, Push to Connect × Push to Connect | ||||||||
| __ | 1/4" × 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 3/8" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 1/2" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |