How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About On/Off Valves
More
Gravity-Flow CPVC Pipe Fittings for Corrosive Chemical Waste
- For Use With: Hydrochloric Acid, Nitric Acid, Salt Water, Sulfuric Acid
- Temperature Range: 40° to 200° F
- Specifications Met: ASTM F2618, IAPMO Listed, NSF/ANSI 14, UL 94 V-0
Made of CPVC, these fittings have better chemical resistance than ABS plastic gravity-flow fittings and can stand up to highly-corrosive acids and other harsh substances. They meet NSF/ANSI 14 requirements for use in corrosive waste gravity-flow systems. Fittings are comparable to Corzan. They meet UL 94 V-0 for flame retardance and ASTM F2618 specifications and testing requirements for material quality. They are IAPMO certified to comply with the International Association for Plumbing and Mechanical Officials product performance standards and the Uniform Plumbing Code (UPC) for installation and repair of plumbing systems.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
For technical drawings and 3-D models, click on a part number.
Acid-Resistant Yor-Lok Fittings for Nickel Alloy Tubing
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Gasoline, Hydraulic Fluid, Hydrofluoric Acid, Mineral Oil, Salt Water, Steam, Sulfuric Acid, Water
- Temperature Range: -325° to 900° F
- Tubing: Use with seamless soft 400 nickel
- Specifications Met: See table
Made of 400 nickel, these Monel fittings have the corrosion resistance to handle hydrofluoric and sulfuric acid. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They include a nut with two sleeves (ferrules). The sleeves bite into tubing as you tighten the nut, creating a strong, leak-tight seal. They are compatible with Swagelok®, Let-Lok, and A-Lok fittings.
For technical drawings and 3-D models, click on a part number.
For Tube | |||||||
|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Pipe Size  | Material | Max. Pressure | Specifications Met | Each | |
NPT Threads | |||||||
| 1/4" | 0.035" | 1/4 | 400 Nickel | 4,800 psi @ 72° F | ASME B1.20.1, ASME B31.1, ASME B31.3, ASTM B564 | 00000000 | 000000 |
| 3/8" | 0.035" | 1/4 | 400 Nickel | 3,100 psi @ 72° F | ASME B1.20.1, ASME B31.1, ASME B31.3, ASTM B564 | 00000000 | 00000 |
| 3/8" | 0.035" | 3/8 | 400 Nickel | 3,100 psi @ 72° F | ASME B1.20.1, ASME B31.1, ASME B31.3, ASTM B564 | 00000000 | 000000 |
| 1/2" | 0.035" | 1/2 | 400 Nickel | 2,300 psi @ 72° F | ASME B1.20.1, ASME B31.1, ASME B31.3, ASTM B564 | 00000000 | 000000 |
Plastic Push-to-Connect Tube Fittings for Chemicals
- For Use With: Inch: Alcohol, Hydrochloric Acid, Nitric Acid, Sodium Carbonate, Sulfuric Acid
Metric: Acetic Acid, Alcohol, Arsenic Acid, Benzoic Acid, Fluoboric Acid, Sodium Carbonate, Sulfuric Acid - Temperature Range: Inch: 0° to 270° F
Metric: 32° to 175° F - Tubing: Use with hard (Durometer 55D-60D) FEP plastic
Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push. An internal gripping ring holds the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting. Use these fittings in low-pressure applications.
PPS fittings resist a wide variety of chemicals, although are not for use with hydrochloric acid or nitric acid. They withstand temperatures up to 175° F.
PVDF fittings offer excellent chemical resistance, and can be used with hydrochloric acid and nitric acid. They withstand temperatures up to 270° F, higher than other push-to-connect fittings for chemicals. They are produced in a clean room and are bagged individually to prevent dirt and moisture from contaminating the inside. PVDF is also known as Kynar.
NPTF (Dryseal) threads are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
Threaded connections can be taken apart as needed for maintenance and repair.
| For Tube OD | Pipe Size | Material | Color | Release Ring Color | Max. Pressure | Each | |
NPTF Threads | |||||||
|---|---|---|---|---|---|---|---|
| 1/4" | 1/8 | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 00000 |
| 1/4" | 1/4 | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 0000 |
| 1/4" | 3/8 | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 00000 |
| 5/16" | 1/4 | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 1/4 | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 0000 |
| 3/8" | 3/8 | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 0000 |
BSPT Threads | |||||||
| 4mm | 1/8 | PPS Plastic | Gray | Gray | 130 psi @ 72° F | 0000000 | 00000 |
| 6mm | 1/8 | PPS Plastic | Gray | Gray | 130 psi @ 72° F | 0000000 | 00000 |
| 6mm | 1/4 | PPS Plastic | Gray | Gray | 130 psi @ 72° F | 0000000 | 00000 |
| 8mm | 1/8 | PPS Plastic | Gray | Gray | 130 psi @ 72° F | 0000000 | 00000 |
| 8mm | 1/4 | PPS Plastic | Gray | Gray | 130 psi @ 72° F | 0000000 | 00000 |
| 8mm | 3/8 | PPS Plastic | Gray | Gray | 130 psi @ 72° F | 0000000 | 00000 |
| 10mm | 1/4 | PPS Plastic | Gray | Gray | 130 psi @ 72° F | 0000000 | 00000 |
| 12mm | 3/8 | PPS Plastic | Gray | Gray | 130 psi @ 72° F | 0000000 | 00000 |
Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.
Threaded connections can be taken apart as needed for maintenance and repair.
| For Tube OD | Pipe Size | Material | Color | Release Ring Color | Max. Pressure | Each | |
NPTF Threads | |||||||
|---|---|---|---|---|---|---|---|
| 1/4" | 1/8 | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 00000 |
| 1/4" | 1/4 | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 0000 |
| 1/4" | 3/8 | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 00000 |
| 3/8" | 1/8 | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 00000 |
| 3/8" | 1/4 | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 00000 |
| 3/8" | 3/8 | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 00000 |
Threaded connections can be taken apart as needed for maintenance and repair.
Fittings with tube stem insert into the push-to-connect end of another fitting in place of a length of tubing.
| Tube Stem OD | For Tube OD | Material | Color | Release Ring Color | Max. Pressure | Each | |
| 1/4" | 1/4" | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 00000 |
| 1/4" | 3/8" | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 0000 |
| 5/16" | 5/16" | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 1/4" | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 0000 |
| 3/8" | 3/8" | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 0000 |
| 1/2" | 1/2" | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 00000 |
Fittings with tube stem insert into the push-to-connect end of another fitting in place of a length of tubing.
| For Tube OD | Material | Color | Release Ring Color | Max. Pressure | Each | |
| 1/4" | PVDF Plastic | Black | Black | 300 psi @ 72° F | 0000000 | 00000 |
| 5/16" | PVDF Plastic | Black | Black | 300 psi @ 72° F | 00000000 | 00000 |
| 3/8" | PVDF Plastic | Black | Black | 300 psi @ 72° F | 0000000 | 00000 |
| 1/2" | PVDF Plastic | Black | Black | 300 psi @ 72° F | 0000000 | 00000 |
| 4mm | PPS Plastic | Gray | Gray | 130 psi @ 72° F | 0000000 | 00000 |
| 6mm | PPS Plastic | Gray | Gray | 130 psi @ 72° F | 0000000 | 00000 |
| 8mm | PPS Plastic | Gray | Gray | 130 psi @ 72° F | 0000000 | 00000 |
| For Tube OD (A) | For Tube OD (B) | Material | Color | Release Ring Color | Max. Pressure | Each | |
| 3/8" | 1/4" | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 0000000 | 00000 |
Stainless Steel Push-to-Connect Tube Fittings for Chemicals
(SAE Straight) Male
Threads with Gasket
- For Use With: Alcohol, Bleach, Lubricated Air, Nitric Acid, Sodium Carbonate, Sulfuric Acid
- Temperature Range: 0° to 175° F
- Tubing: Use with firm or hard (Durometer 80A-60D) FEP, polyethylene, or PTFE plastic
Fittings are 316 stainless steel, which has excellent chemical resistance and is more durable than plastic. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Instead of a release ring, these fittings have a release sleeve that slides back to disconnect tubing.
Metric and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks. UN/UNF (SAE Straight) threads are also known as O-ring boss threads.
For technical drawings and 3-D models, click on a part number.
(SAE Straight) Male
Threads with Gasket
| For Tube OD | Pipe Size | Thread Size | Thread Pitch, mm | Material | Gasket Material | Max. Pressure | Each | |
NPT Threads | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4" | 1/8 | __ | __ | 316 Stainless Steel | __ | 345 psi @ 72° F | 0000000 | 000000 |
| 1/4" | 1/4 | __ | __ | 316 Stainless Steel | __ | 345 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 3/8 | __ | __ | 316 Stainless Steel | __ | 345 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 1/4 | __ | __ | 316 Stainless Steel | __ | 345 psi @ 72° F | 00000000 | 000000 |
| 3/8" | 3/8 | __ | __ | 316 Stainless Steel | __ | 345 psi @ 72° F | 00000000 | 000000 |
| 3/8" | 1/2 | __ | __ | 316 Stainless Steel | __ | 345 psi @ 72° F | 00000000 | 000000 |
| 1/2" | 1/4 | __ | __ | 316 Stainless Steel | __ | 345 psi @ 72° F | 00000000 | 000000 |
| 1/2" | 1/2 | __ | __ | 316 Stainless Steel | __ | 345 psi @ 72° F | 0000000 | 000000 |
| 6mm | 1/8 | __ | __ | 316 Stainless Steel | __ | 345 psi @ 72° F | 00000000 | 00000 |
| 6mm | 1/4 | __ | __ | 316 Stainless Steel | __ | 345 psi @ 72° F | 00000000 | 00000 |
| 8mm | 1/4 | __ | __ | 316 Stainless Steel | __ | 345 psi @ 72° F | 00000000 | 00000 |
Metric Threads | ||||||||
| 1/4" | __ | M5 | 0.8 | 316 Stainless Steel | Viton® Fluoroelastomer Rubber | 345 psi @ 72° F | 00000000 | 00000 |
| 1/4" | __ | M7 | 1 | 316 Stainless Steel | Viton® Fluoroelastomer Rubber | 345 psi @ 72° F | 00000000 | 00000 |
| 1/4" | __ | M10 | 1 | 316 Stainless Steel | Viton® Fluoroelastomer Rubber | 345 psi @ 72° F | 00000000 | 00000 |
| 4mm | __ | M3 | 0.5 | 316 Stainless Steel | Viton® Fluoroelastomer Rubber | 345 psi @ 72° F | 0000000 | 00000 |
| 4mm | __ | M5 | 0.8 | 316 Stainless Steel | Viton® Fluoroelastomer Rubber | 345 psi @ 72° F | 00000000 | 00000 |
| 6mm | __ | M5 | 0.8 | 316 Stainless Steel | Viton® Fluoroelastomer Rubber | 345 psi @ 72° F | 00000000 | 00000 |
| 6mm | __ | M10 | 1 | 316 Stainless Steel | Viton® Fluoroelastomer Rubber | 345 psi @ 72° F | 00000000 | 00000 |
| 10mm | __ | M10 | 1 | 316 Stainless Steel | Viton® Fluoroelastomer Rubber | 345 psi @ 72° F | 00000000 | 000000 |
UN/UNF (SAE Straight) Threads | ||||||||
| 1/4" | __ | 10-32 | __ | 316 Stainless Steel | Viton® Fluoroelastomer Rubber | 345 psi @ 72° F | 00000000 | 00000 |
| 4mm | __ | 10-32 | __ | 316 Stainless Steel | Viton® Fluoroelastomer Rubber | 345 psi @ 72° F | 0000000 | 00000 |
| 6mm | __ | 10-32 | __ | 316 Stainless Steel | Viton® Fluoroelastomer Rubber | 345 psi @ 72° F | 00000000 | 00000 |
| For Tube OD | Material | Max. Pressure | Each | |
| 1/4" | 316 Stainless Steel | 345 psi @ 72° F | 00000000 | 000000 |
Compression Fittings for Plastic Tubing—Chemicals
- For Use With: PFA Plastic: Hydrochloric Acid, Sulfuric Acid
PTFE Plastic: Alcohol, Ammonia, Benzoic Acid, Bleach, Bromine, Coolant, Fluoboric Acid, Hydrochloric Acid, Hydrofluoric Acid, Nitric Acid, Organic Solvents, Sodium Carbonate, Sulfuric Acid - Temperature Range: PFA Plastic: 0° to 350° F
PTFE Plastic: -40° to 185° F - Tubing: PFA Plastic: Use with hard (Durometer 50D-65D) PFA or PTFE plastic
PTFE Plastic: Use with hard (Durometer 60D) PFA or PTFE plastic
A sleeve (ferrule) compresses the tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included. Fittings are also known as flareless fittings. Fittings that include a gripper sleeve on the tubing create an even tighter seal.
PFA fittings stand up to harsh substances. They’re made through a melting process. PTFE fittings are highly resistant to most acids, alcohols, detergents, and solvents. They’re made by machining. Their nut is made of PVDF, which is resistant to halogens such as chlorine and bromine, strong acids such as hydrofluoric and nitric acids, and organic solvents.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | ||||||
|---|---|---|---|---|---|---|
| 1/8" | 1/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
| 1/8" | 1/4 | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
| 1/4" | 1/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
| 1/4" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
| 3/8" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
| 1/2" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
| 1/2" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
| 1/2" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
| 3/4" | 1/2 | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
| 3/4" | 3/4 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
| 6mm | 1/8 | PTFE Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
| 6mm | 1/4 | PTFE Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
| 10mm | 3/8 | PTFE Plastic | White | 100 psi @ 72° F | 000000000 | 000000 |
| For Tube OD | Material | Color | Max. Pressure | Each | |
| 1/4" | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
| 3/8" | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
| 1/2" | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
| 3/4" | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
| 6mm | PTFE Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
| 12mm | PTFE Plastic | White | 80 psi @ 72° F | 000000000 | 000000 |
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
| For Tube OD | Material | Color | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | |
| 1/4" | PFA Plastic | White | 125 psi @ 72° F | 1/2" | 1/4" | 000000000 | 0000000 |
On/Off Valves with Push-to-Connect Fittings for Chemicals
Push to Connect ×
Push to Connect
Insert tubing into the fittings on these valves—no heat, solder, or flux required. To withstand aggressive and corrosive solutions, they have a chemical-resistant fluoroelastomer seal and a plastic body.
Full-port valves do not restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With:
Connector: Air, Argon, Carbon Dioxide, Citric Acid, Deionized Water, Ethylene Glycol, Fuel Oil, Helium, Isopropyl Alcohol, Krypton, Natural Gas, Neon, Nitrogen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water, Xenon
Adapter: Air, Citric Acid, Ethylene Glycol, Helium, Isopropyl Alcohol, Mineral Spirits, Natural Gas, Nitrogen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sulfuric Acid, Water - Ball Material: Polypropylene Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
| Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
90° Elbow Adapter, Push to Connect × Female NPT Threaded | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 000000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
| 1/2 | 1/2" | 2.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Male NPT Threaded | ||||||||
| 1/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Push to Connect | ||||||||
| __ | 1/4" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 1/4" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| __ | 3/8" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
90° Elbow Connector, Push to Connect × Push to Connect | ||||||||
| __ | 1/4" × 1/4" | 0.6 | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 3/8" × 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 1/2" × 1/2" | 2.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
- Valve Type: Ball
- For Use With:
Connector: Air, Argon, Carbon Dioxide, Citric Acid, Deionized Water, Ethylene Glycol, Helium, Isopropyl Alcohol, Krypton, Natural Gas, Neon, Nitrogen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water, Xenon
Adapter: Air, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water, Xylene - Ball Material: PVDF Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
| Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
90° Elbow Adapter, Push to Connect × Female NPT Threaded | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 000000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
| 1/2 | 1/2" | 2.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Male NPT Threaded | ||||||||
| 1/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Push to Connect | ||||||||
| __ | 1/4" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 1/4" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| __ | 3/8" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
90° Elbow Connector, Push to Connect × Push to Connect | ||||||||
| __ | 1/4" × 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 3/8" × 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 1/2" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |