Contain blasting media, dust, and debris while finishing your parts. These cabinets keep your workspace cleaner than mobile blasters. After blasting, media automatically recycles back into the cabinet so you don’t have to pause and refill. Also known as siphon cabinets, they have a suction feed. They propel media slower than pressure-feed cabinets but have fewer moving parts, so they require less maintenance. However, their slower speeds makes them incompatible for use with metallic blasting media.

These cabinets arrive fully assembled, welded, and sealed, so no extra PPE is needed during blasting. Built from thick 14- and 11-gauge steel with a powder-coated finish, they resist wear and hold up to frequent use. The included dust collector clears dust inside the cabinet to maintain visibility. A safety switch stops airflow when the door opens.

Do not use with steel grit, steel shot, stainless steel shot, baking soda, dolomite, or plastic grit.

Smooth and clean parts hands-free. With these cabinets, you won't have to juggle moving your part, holding the blasting gun, and pressing a pedal to blast like you would with traditional abrasive blasters. Just choose a cleaning routine on the touchscreen and they’ll get the job done in as little as 15 minutes. They both blast and tumble your parts to remove rough edges and contaminants, even from shallow holes and internal channels. And to make your parts clean to the touch, an ionizer at the tip of the blasting gun neutralizes the charge. That means static won’t cause particles to cling to your parts. For delicate parts you don’t want to tumble, switch to manual mode and use these cabinets like a traditional blasting cabinet.

They’ll work anywhere with a compressed air source. Quieter than a hair dryer, the tempered glass window muffles their noise. They also filter debris out from the media, recycling it so you can use it again.

Do not use with steel shot or baking soda.

The entire top of these cabinets opens to fit parts too large for standard cabinets. The spring-assisted mechanism opens the door so a single person can load objects without help. When fully open, the top provides enough clearance for a fork truck or crane to place parts directly on the work surface. Also known as siphon cabinets, they have a suction feed. They propel media slower than pressure-feed cabinets but have fewer moving parts, so they require less maintenance. However, their slower speed makes them incompatible for use with metallic blasting media.

These cabinets arrive fully assembled, welded, and sealed, so no extra PPE is needed during blasting. Made with powder-coated steel, they resist wear and hold up to frequent use. The included dust collector clears dust inside the cabinet to maintain visibility. A safety switch stops airflow when the door opens.

Do not use with steel grit, steel shot, stainless steel shot, baking soda, dolomite, or plastic grit.

Polish parts in hours with vibrating motion instead of waiting days for a rotary tumbler. These tumblers also preserve sharp edges better than rotary tumblers to maintain the shape of your part.

The lid is clear to inspect parts while the tumbler is operating. A drain empties liquid from the bowl, so you don't have to clear it out yourself. You can fill the tumbler up to 100% capacity to finish multiple parts at the same time. Run the tumbler wet or dry, then unload the mixture into a sieve to separate your parts.