About AC to AC Voltage Transformers
For single-phase equipment, use this formula to find power output: VA = Volts × Amps
For three-phase equipment, use this formula to find power output: VA = Volts × Amps × 1.73
More
Electric Door Strike Plates for Door Handles and Knobs
All of these strike plates can be used with door handles and knobs. The ROFU 1510 and Rutherford S65 strike plates can also be used with pry-resistant door handles and knobs. Use them all to regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
Rutherford and Von Duprin strike plates meet UL 1034 for burglary resistance.
For technical drawings and 3-D models, click on a part number.
For Cutout | Faceplate | Voltage | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Dp. | Ht. | Wd. | Holding Strength, lbs. | AC | DC | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Appearance | Choose a Finish | Each | |
ROFU 1509 | |||||||||||||||
| 5/8" | 3 1/2" | 1" | 1 1/8" | 7 15/16" | 1 7/16" | 1,000 | 8V-16V | 3V-6V | Metal, Wood | Left, Right | Yes | Dull | Aluminum Coated | 0000000 | 0000000 |
ROFU 1510 | |||||||||||||||
| 11/16" | 2 15/16" | 13/16" | 1 1/2" | 5 7/8" | 1 1/4" | 800 | 8V-16V | __ | Wood | Left, Right | Yes | Satin | Satin Chrome | 0000000 | 000000 |
Rutherford S65 | |||||||||||||||
| 3/4" | 3 3/8" | 5/8" | 1 3/16" | 4 7/8" | 1 1/4" | 1,000 | 12V-24V | 12V/24V | Metal, Wood | Left, Right | Yes | Dull | __ | 0000000 | 000000 |
Von Duprin 5100 | |||||||||||||||
| 1/2" | 3 3/8" | 1" | 1 3/8" | 4 7/8" | 1 1/4" | 1,000 | __ | 12V/24V | Metal, Wood | Left, Right | Yes | Dull | 000000 | 000000 | |
Electric Door Strike Plates for Touch Bars and Crossbars
Use these strike plates with touch bars and crossbars, but not pry-resistant crossbars. They regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Then, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge).
For technical drawings and 3-D models, click on a part number.
Faceplate | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Holding Strength | DC Voltage | Material | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Each | |
HES 9600 | ||||||||||
| 3/4" | 9" | 1 3/4" | 1,500 lbs. | 12V/24V | Dull Stainless Steel | Metal, Wood | Left, Right | Yes | 0000000 | 0000000 |
| For Strike | Output Voltage | Each | |
| HES 9600 | 12-24V DC | 0000000 | 000000 |
Universal Electric Door Strike Plates
These versatile strike plates are for use with door handles and knobs, pry-resistant door handles and knobs, and pry-resistant crossbars. They regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. All of these strike plates must be hardwired. They meet UL 1034 for burglary resistance.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
For technical drawings and 3-D models, click on a part number.
For Cutout | Faceplate | Voltage | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Dp. | Ht. | Wd. | Holding Strength | AC | DC | Material | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Each | |
Rutherford F2 | ||||||||||||||
| 3/4" | 3 1/4" | 1 5/8" | 1 5/8" | 4 37/64" | 1 1/4" | 1,500 lbs. | 12V-24V | 12V/24V | Dull Stainless Steel | Metal, Wood | Left, Right | Yes | 000000 | 0000000 |
HES 1600 | ||||||||||||||
| 1 11/16" | 3 1/4" | 1 5/8" | 1 3/8" | 4 7/8" | 1 1/4" | 1,500 lbs. | 12V-24V | 12V/24V | Dull Stainless Steel | Metal, Wood | Left, Right | Yes | 00000000 | 000000 |
Electric Door Strike Plates for Surface Mounted Locks
If your lock latches to a mechanism that's mounted to the door's surface instead of in the door jamb, select this strike plate. It regulates access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
For technical drawings and 3-D models, click on a part number.
For Cutout | Voltage | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Dp. | Holding Strength | AC | DC | Finish | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Each | |
Trine 00 | ||||||||||||
| 5/8" | 2 1/8" | 1 3/16" | 3 5/16" | 1,000 lbs. | 8V-16V | 4V-6V | Dull Brass | Metal, Wood | Left, Right | Yes | 0000000 | 0000000 |
| For Strike | Output Voltage | Each | |
| Trine 00 | 8-24V DC | 0000000 | 00000 |
Low-Current Panel-Mount AC to AC Transformers
Hardwire this transformer into your panel. Use it to power low-voltage devices such as alarms and sensors. It cannot be sold to California due to local energy efficiency requirements.
| Input Voltage | Output Voltage (Power Output, VA) | Ht. | Wd. | Dp. | Cannot Be Sold To | Each | |
Single Phase—Wire Leads Input and Screw Terminals Output | |||||||
|---|---|---|---|---|---|---|---|
Step Down Voltage | |||||||
| 120V AC | 8V AC (20), 16V AC (30), 24V AC (30) | 2.2" | 2.3" | 2.9" | CA | 0000000 | 000000 |